esp-metadata-generated 0.4.0

// Do NOT edit this file directly. Make your changes to esp-metadata,
// then run `cargo xtask update-metadata`.

/// The name of the chip as `&str`
///
/// # Example
///
/// ```rust, no_run
/// use esp_hal::chip;
/// let chip_name = chip!();
#[doc = concat!("assert_eq!(chip_name, ", chip!(), ")")]
/// ```
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! chip {
    () => {
        "esp32c61"
    };
}
/// The pretty name of the chip as `&str`
///
/// # Example
///
/// ```rust, no_run
/// use esp_hal::chip;
/// let chip_name = chip_pretty!();
#[doc = concat!("assert_eq!(chip_name, ", chip_pretty!(), ")")]
/// ```
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! chip_pretty {
    () => {
        "ESP32-C61"
    };
}
/// The properties of this chip and its drivers.
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! property {
    ("chip") => {
        "esp32c61"
    };
    ("arch") => {
        "riscv"
    };
    ("cores") => {
        1
    };
    ("cores", str) => {
        stringify!(1)
    };
    ("trm") => {
        "https://www.espressif.com/sites/default/files/documentation/esp32-c61_technical_reference_manual_en.pdf"
    };
    ("bt.controller") => {
        "npl"
    };
    ("dma.kind") => {
        "gdma"
    };
    ("dma.supports_mem2mem") => {
        true
    };
    ("dma.can_access_psram") => {
        false
    };
    ("dma.ext_mem_configurable_block_size") => {
        false
    };
    ("dma.separate_in_out_interrupts") => {
        true
    };
    ("dma.max_priority") => {
        5
    };
    ("dma.max_priority", str) => {
        stringify!(5)
    };
    ("dma.gdma_version") => {
        2
    };
    ("dma.gdma_version", str) => {
        stringify!(2)
    };
    ("ecc.zero_extend_writes") => {
        true
    };
    ("ecc.separate_jacobian_point_memory") => {
        true
    };
    ("ecc.has_memory_clock_gate") => {
        true
    };
    ("ecc.supports_enhanced_security") => {
        true
    };
    ("ecc.mem_block_size") => {
        32
    };
    ("gpio.has_bank_1") => {
        false
    };
    ("gpio.gpio_function") => {
        1
    };
    ("gpio.gpio_function", str) => {
        stringify!(1)
    };
    ("gpio.constant_0_input") => {
        96
    };
    ("gpio.constant_0_input", str) => {
        stringify!(96)
    };
    ("gpio.constant_1_input") => {
        64
    };
    ("gpio.constant_1_input", str) => {
        stringify!(64)
    };
    ("gpio.remap_iomux_pin_registers") => {
        false
    };
    ("gpio.func_in_sel_offset") => {
        0
    };
    ("gpio.func_in_sel_offset", str) => {
        stringify!(0)
    };
    ("gpio.input_signal_max") => {
        100
    };
    ("gpio.input_signal_max", str) => {
        stringify!(100)
    };
    ("gpio.output_signal_max") => {
        256
    };
    ("gpio.output_signal_max", str) => {
        stringify!(256)
    };
    ("i2c_master.has_fsm_timeouts") => {
        true
    };
    ("i2c_master.has_hw_bus_clear") => {
        true
    };
    ("i2c_master.has_bus_timeout_enable") => {
        true
    };
    ("i2c_master.separate_filter_config_registers") => {
        false
    };
    ("i2c_master.can_estimate_nack_reason") => {
        true
    };
    ("i2c_master.has_conf_update") => {
        true
    };
    ("i2c_master.has_reliable_fsm_reset") => {
        true
    };
    ("i2c_master.has_arbitration_en") => {
        true
    };
    ("i2c_master.has_tx_fifo_watermark") => {
        true
    };
    ("i2c_master.bus_timeout_is_exponential") => {
        true
    };
    ("i2c_master.max_bus_timeout") => {
        31
    };
    ("i2c_master.max_bus_timeout", str) => {
        stringify!(31)
    };
    ("i2c_master.ll_intr_mask") => {
        262143
    };
    ("i2c_master.ll_intr_mask", str) => {
        stringify!(262143)
    };
    ("i2c_master.fifo_size") => {
        32
    };
    ("i2c_master.fifo_size", str) => {
        stringify!(32)
    };
    ("interrupts.status_registers") => {
        3
    };
    ("interrupts.status_registers", str) => {
        stringify!(3)
    };
    ("interrupts.disabled_interrupt") => {
        0
    };
    ("psram.octal_spi") => {
        false
    };
    ("psram.extmem_origin") => {
        1107296256
    };
    ("psram.extmem_origin", str) => {
        stringify!(1107296256)
    };
    ("rng.apb_cycle_wait_num") => {
        16
    };
    ("rng.apb_cycle_wait_num", str) => {
        stringify!(16)
    };
    ("rng.trng_supported") => {
        false
    };
    ("sha.dma") => {
        true
    };
    ("soc.cpu_has_branch_predictor") => {
        false
    };
    ("soc.cpu_has_csr_pc") => {
        false
    };
    ("soc.multi_core_enabled") => {
        false
    };
    ("soc.rc_fast_clk_default") => {
        17500000
    };
    ("soc.rc_fast_clk_default", str) => {
        stringify!(17500000)
    };
    ("clock_tree.cpu_clk.divisor") => {
        (0, 255)
    };
    ("clock_tree.ahb_clk.divisor") => {
        (0, 255)
    };
    ("clock_tree.apb_clk.divisor") => {
        (0, 255)
    };
    ("clock_tree.uart.function_clock.div_num") => {
        (0, 255)
    };
    ("clock_tree.uart.baud_rate_generator.fractional") => {
        (0, 15)
    };
    ("clock_tree.uart.baud_rate_generator.integral") => {
        (0, 4095)
    };
    ("spi_master.supports_dma") => {
        true
    };
    ("spi_master.has_octal") => {
        false
    };
    ("spi_master.has_app_interrupts") => {
        true
    };
    ("spi_master.has_dma_segmented_transfer") => {
        true
    };
    ("spi_master.has_clk_pre_div") => {
        true
    };
    ("spi_slave.supports_dma") => {
        false
    };
    ("timergroup.timg_has_timer1") => {
        false
    };
    ("timergroup.timg_has_divcnt_rst") => {
        true
    };
    ("uart.ram_size") => {
        128
    };
    ("uart.ram_size", str) => {
        stringify!(128)
    };
    ("uart.peripheral_controls_mem_clk") => {
        true
    };
    ("uart.has_sclk_divider") => {
        false
    };
    ("wifi.has_wifi6") => {
        true
    };
    ("wifi.mac_version") => {
        3
    };
    ("wifi.mac_version", str) => {
        stringify!(3)
    };
    ("wifi.has_5g") => {
        false
    };
    ("wifi.csi_supported") => {
        true
    };
}
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_ecc_working_mode {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_ecc_working_mode { $(($pattern) => $code;)* ($other
        : tt) => {} } _for_each_inner_ecc_working_mode!((0, AffinePointMultiplication));
        _for_each_inner_ecc_working_mode!((2, AffinePointVerification));
        _for_each_inner_ecc_working_mode!((3, AffinePointVerificationAndMultiplication));
        _for_each_inner_ecc_working_mode!((4, JacobianPointMultiplication));
        _for_each_inner_ecc_working_mode!((5, AffinePointAddition));
        _for_each_inner_ecc_working_mode!((6, JacobianPointVerification));
        _for_each_inner_ecc_working_mode!((7,
        AffinePointVerificationAndJacobianPointMultiplication));
        _for_each_inner_ecc_working_mode!((8, ModularAddition));
        _for_each_inner_ecc_working_mode!((9, ModularSubtraction));
        _for_each_inner_ecc_working_mode!((10, ModularMultiplication));
        _for_each_inner_ecc_working_mode!((11, ModularDivision));
        _for_each_inner_ecc_working_mode!((all(0, AffinePointMultiplication), (2,
        AffinePointVerification), (3, AffinePointVerificationAndMultiplication), (4,
        JacobianPointMultiplication), (5, AffinePointAddition), (6,
        JacobianPointVerification), (7,
        AffinePointVerificationAndJacobianPointMultiplication), (8, ModularAddition), (9,
        ModularSubtraction), (10, ModularMultiplication), (11, ModularDivision)));
    };
}
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_ecc_curve {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_ecc_curve { $(($pattern) => $code;)* ($other : tt)
        => {} } _for_each_inner_ecc_curve!((0, P192, 192));
        _for_each_inner_ecc_curve!((1, P256, 256)); _for_each_inner_ecc_curve!((all(0,
        P192, 192), (1, P256, 256)));
    };
}
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_interrupt {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_interrupt { $(($pattern) => $code;)* ($other : tt)
        => {} } _for_each_inner_interrupt!(([disabled 0] 0));
        _for_each_inner_interrupt!(([reserved 0] 1));
        _for_each_inner_interrupt!(([reserved 1] 2));
        _for_each_inner_interrupt!(([reserved 2] 3));
        _for_each_inner_interrupt!(([reserved 3] 4));
        _for_each_inner_interrupt!(([reserved 4] 5));
        _for_each_inner_interrupt!(([reserved 5] 6));
        _for_each_inner_interrupt!(([reserved 6] 7));
        _for_each_inner_interrupt!(([reserved 7] 8));
        _for_each_inner_interrupt!(([reserved 8] 9));
        _for_each_inner_interrupt!(([reserved 9] 10));
        _for_each_inner_interrupt!(([reserved 10] 11));
        _for_each_inner_interrupt!(([reserved 11] 12));
        _for_each_inner_interrupt!(([reserved 12] 13));
        _for_each_inner_interrupt!(([reserved 13] 14));
        _for_each_inner_interrupt!(([reserved 14] 15));
        _for_each_inner_interrupt!(([vector 0] 16)); _for_each_inner_interrupt!(([vector
        1] 17)); _for_each_inner_interrupt!(([vector 2] 18));
        _for_each_inner_interrupt!(([vector 3] 19)); _for_each_inner_interrupt!(([vector
        4] 20)); _for_each_inner_interrupt!(([vector 5] 21));
        _for_each_inner_interrupt!(([vector 6] 22)); _for_each_inner_interrupt!(([vector
        7] 23)); _for_each_inner_interrupt!(([direct_bindable 0] 24));
        _for_each_inner_interrupt!(([direct_bindable 1] 25));
        _for_each_inner_interrupt!(([direct_bindable 2] 26));
        _for_each_inner_interrupt!(([direct_bindable 3] 27));
        _for_each_inner_interrupt!(([direct_bindable 4] 28));
        _for_each_inner_interrupt!(([direct_bindable 5] 29));
        _for_each_inner_interrupt!(([direct_bindable 6] 30));
        _for_each_inner_interrupt!(([direct_bindable 7] 31));
        _for_each_inner_interrupt!((all([disabled 0] 0), ([reserved 0] 1), ([reserved 1]
        2), ([reserved 2] 3), ([reserved 3] 4), ([reserved 4] 5), ([reserved 5] 6),
        ([reserved 6] 7), ([reserved 7] 8), ([reserved 8] 9), ([reserved 9] 10),
        ([reserved 10] 11), ([reserved 11] 12), ([reserved 12] 13), ([reserved 13] 14),
        ([reserved 14] 15), ([vector 0] 16), ([vector 1] 17), ([vector 2] 18), ([vector
        3] 19), ([vector 4] 20), ([vector 5] 21), ([vector 6] 22), ([vector 7] 23),
        ([direct_bindable 0] 24), ([direct_bindable 1] 25), ([direct_bindable 2] 26),
        ([direct_bindable 3] 27), ([direct_bindable 4] 28), ([direct_bindable 5] 29),
        ([direct_bindable 6] 30), ([direct_bindable 7] 31)));
    };
}
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_classified_interrupt {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_classified_interrupt { $(($pattern) => $code;)*
        ($other : tt) => {} } _for_each_inner_classified_interrupt!(([direct_bindable 0]
        24)); _for_each_inner_classified_interrupt!(([direct_bindable 1] 25));
        _for_each_inner_classified_interrupt!(([direct_bindable 2] 26));
        _for_each_inner_classified_interrupt!(([direct_bindable 3] 27));
        _for_each_inner_classified_interrupt!(([direct_bindable 4] 28));
        _for_each_inner_classified_interrupt!(([direct_bindable 5] 29));
        _for_each_inner_classified_interrupt!(([direct_bindable 6] 30));
        _for_each_inner_classified_interrupt!(([direct_bindable 7] 31));
        _for_each_inner_classified_interrupt!(([vector 0] 16));
        _for_each_inner_classified_interrupt!(([vector 1] 17));
        _for_each_inner_classified_interrupt!(([vector 2] 18));
        _for_each_inner_classified_interrupt!(([vector 3] 19));
        _for_each_inner_classified_interrupt!(([vector 4] 20));
        _for_each_inner_classified_interrupt!(([vector 5] 21));
        _for_each_inner_classified_interrupt!(([vector 6] 22));
        _for_each_inner_classified_interrupt!(([vector 7] 23));
        _for_each_inner_classified_interrupt!(([reserved 0] 1));
        _for_each_inner_classified_interrupt!(([reserved 1] 2));
        _for_each_inner_classified_interrupt!(([reserved 2] 3));
        _for_each_inner_classified_interrupt!(([reserved 3] 4));
        _for_each_inner_classified_interrupt!(([reserved 4] 5));
        _for_each_inner_classified_interrupt!(([reserved 5] 6));
        _for_each_inner_classified_interrupt!(([reserved 6] 7));
        _for_each_inner_classified_interrupt!(([reserved 7] 8));
        _for_each_inner_classified_interrupt!(([reserved 8] 9));
        _for_each_inner_classified_interrupt!(([reserved 9] 10));
        _for_each_inner_classified_interrupt!(([reserved 10] 11));
        _for_each_inner_classified_interrupt!(([reserved 11] 12));
        _for_each_inner_classified_interrupt!(([reserved 12] 13));
        _for_each_inner_classified_interrupt!(([reserved 13] 14));
        _for_each_inner_classified_interrupt!(([reserved 14] 15));
        _for_each_inner_classified_interrupt!((direct_bindable([direct_bindable 0] 24),
        ([direct_bindable 1] 25), ([direct_bindable 2] 26), ([direct_bindable 3] 27),
        ([direct_bindable 4] 28), ([direct_bindable 5] 29), ([direct_bindable 6] 30),
        ([direct_bindable 7] 31))); _for_each_inner_classified_interrupt!((vector([vector
        0] 16), ([vector 1] 17), ([vector 2] 18), ([vector 3] 19), ([vector 4] 20),
        ([vector 5] 21), ([vector 6] 22), ([vector 7] 23)));
        _for_each_inner_classified_interrupt!((reserved([reserved 0] 1), ([reserved 1]
        2), ([reserved 2] 3), ([reserved 3] 4), ([reserved 4] 5), ([reserved 5] 6),
        ([reserved 6] 7), ([reserved 7] 8), ([reserved 8] 9), ([reserved 9] 10),
        ([reserved 10] 11), ([reserved 11] 12), ([reserved 12] 13), ([reserved 13] 14),
        ([reserved 14] 15)));
    };
}
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_interrupt_priority {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_interrupt_priority { $(($pattern) => $code;)*
        ($other : tt) => {} } _for_each_inner_interrupt_priority!((0, 1, Priority1,
        Level1)); _for_each_inner_interrupt_priority!((1, 2, Priority2, Level2));
        _for_each_inner_interrupt_priority!((2, 3, Priority3, Level3));
        _for_each_inner_interrupt_priority!((3, 4, Priority4, Level4));
        _for_each_inner_interrupt_priority!((4, 5, Priority5, Level5));
        _for_each_inner_interrupt_priority!((5, 6, Priority6, Level6));
        _for_each_inner_interrupt_priority!((6, 7, Priority7, Level7));
        _for_each_inner_interrupt_priority!((7, 8, Priority8, Level8));
        _for_each_inner_interrupt_priority!((all(0, 1, Priority1, Level1), (1, 2,
        Priority2, Level2), (2, 3, Priority3, Level3), (3, 4, Priority4, Level4), (4, 5,
        Priority5, Level5), (5, 6, Priority6, Level6), (6, 7, Priority7, Level7), (7, 8,
        Priority8, Level8)));
    };
}
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_sw_interrupt {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_sw_interrupt { $(($pattern) => $code;)* ($other :
        tt) => {} } _for_each_inner_sw_interrupt!((0, FROM_CPU_INTR0,
        software_interrupt0)); _for_each_inner_sw_interrupt!((1, FROM_CPU_INTR1,
        software_interrupt1)); _for_each_inner_sw_interrupt!((2, FROM_CPU_INTR2,
        software_interrupt2)); _for_each_inner_sw_interrupt!((3, FROM_CPU_INTR3,
        software_interrupt3)); _for_each_inner_sw_interrupt!((all(0, FROM_CPU_INTR0,
        software_interrupt0), (1, FROM_CPU_INTR1, software_interrupt1), (2,
        FROM_CPU_INTR2, software_interrupt2), (3, FROM_CPU_INTR3, software_interrupt3)));
    };
}
#[macro_export]
macro_rules! sw_interrupt_delay {
    () => {
        unsafe {
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
            ::core::arch::asm!("nop");
        }
    };
}
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_sha_algorithm {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_sha_algorithm { $(($pattern) => $code;)* ($other :
        tt) => {} } _for_each_inner_sha_algorithm!((Sha1, "SHA-1"(sizes : 64, 20, 8)
        (insecure_against : "collision", "length extension"), 0));
        _for_each_inner_sha_algorithm!((Sha224, "SHA-224"(sizes : 64, 28, 8)
        (insecure_against : "length extension"), 1));
        _for_each_inner_sha_algorithm!((Sha256, "SHA-256"(sizes : 64, 32, 8)
        (insecure_against : "length extension"), 2));
        _for_each_inner_sha_algorithm!((algos(Sha1, "SHA-1"(sizes : 64, 20, 8)
        (insecure_against : "collision", "length extension"), 0), (Sha224,
        "SHA-224"(sizes : 64, 28, 8) (insecure_against : "length extension"), 1),
        (Sha256, "SHA-256"(sizes : 64, 32, 8) (insecure_against : "length extension"),
        2)));
    };
}
#[macro_export]
/// ESP-HAL must provide implementation for the following functions:
/// ```rust, no_run
/// // XTAL_CLK
///
/// fn configure_xtal_clk_impl(
///     _clocks: &mut ClockTree,
///     _old_config: Option<XtalClkConfig>,
///     _new_config: XtalClkConfig,
/// ) {
///     todo!()
/// }
///
/// // RC_FAST_CLK
///
/// fn enable_rc_fast_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // PLL_CLK
///
/// fn enable_pll_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // XTAL32K_CLK
///
/// fn enable_xtal32k_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // OSC_SLOW_CLK
///
/// fn enable_osc_slow_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // RC_SLOW_CLK
///
/// fn enable_rc_slow_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // PLL_F20M
///
/// fn enable_pll_f20m_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // PLL_F40M
///
/// fn enable_pll_f40m_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // PLL_F48M
///
/// fn enable_pll_f48m_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // PLL_F60M
///
/// fn enable_pll_f60m_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // PLL_F80M
///
/// fn enable_pll_f80m_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // PLL_F120M
///
/// fn enable_pll_f120m_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // PLL_F160M
///
/// fn enable_pll_f160m_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // HP_ROOT_CLK
///
/// fn enable_hp_root_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// fn configure_hp_root_clk_impl(
///     _clocks: &mut ClockTree,
///     _old_config: Option<HpRootClkConfig>,
///     _new_config: HpRootClkConfig,
/// ) {
///     todo!()
/// }
///
/// // CPU_CLK
///
/// fn enable_cpu_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// fn configure_cpu_clk_impl(
///     _clocks: &mut ClockTree,
///     _old_config: Option<CpuClkConfig>,
///     _new_config: CpuClkConfig,
/// ) {
///     todo!()
/// }
///
/// // AHB_CLK
///
/// fn enable_ahb_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// fn configure_ahb_clk_impl(
///     _clocks: &mut ClockTree,
///     _old_config: Option<AhbClkConfig>,
///     _new_config: AhbClkConfig,
/// ) {
///     todo!()
/// }
///
/// // APB_CLK
///
/// fn enable_apb_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// fn configure_apb_clk_impl(
///     _clocks: &mut ClockTree,
///     _old_config: Option<ApbClkConfig>,
///     _new_config: ApbClkConfig,
/// ) {
///     todo!()
/// }
///
/// // XTAL_D2_CLK
///
/// fn enable_xtal_d2_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// // LP_FAST_CLK
///
/// fn enable_lp_fast_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// fn configure_lp_fast_clk_impl(
///     _clocks: &mut ClockTree,
///     _old_config: Option<LpFastClkConfig>,
///     _new_config: LpFastClkConfig,
/// ) {
///     todo!()
/// }
///
/// // LP_SLOW_CLK
///
/// fn enable_lp_slow_clk_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// fn configure_lp_slow_clk_impl(
///     _clocks: &mut ClockTree,
///     _old_config: Option<LpSlowClkConfig>,
///     _new_config: LpSlowClkConfig,
/// ) {
///     todo!()
/// }
///
/// // TIMG_CALIBRATION_CLOCK
///
/// fn enable_timg_calibration_clock_impl(_clocks: &mut ClockTree, _en: bool) {
///     todo!()
/// }
///
/// fn configure_timg_calibration_clock_impl(
///     _clocks: &mut ClockTree,
///     _old_config: Option<TimgCalibrationClockConfig>,
///     _new_config: TimgCalibrationClockConfig,
/// ) {
///     todo!()
/// }
///
/// impl TimgInstance {
///     // TIMG_FUNCTION_CLOCK
///
///     fn enable_function_clock_impl(self, _clocks: &mut ClockTree, _en: bool) {
///         todo!()
///     }
///
///     fn configure_function_clock_impl(
///         self,
///         _clocks: &mut ClockTree,
///         _old_config: Option<TimgFunctionClockConfig>,
///         _new_config: TimgFunctionClockConfig,
///     ) {
///         todo!()
///     }
///
///     // TIMG_WDT_CLOCK
///
///     fn enable_wdt_clock_impl(self, _clocks: &mut ClockTree, _en: bool) {
///         todo!()
///     }
///
///     fn configure_wdt_clock_impl(
///         self,
///         _clocks: &mut ClockTree,
///         _old_config: Option<TimgWdtClockConfig>,
///         _new_config: TimgWdtClockConfig,
///     ) {
///         todo!()
///     }
/// }
/// impl UartInstance {
///     // UART_FUNCTION_CLOCK
///
///     fn enable_function_clock_impl(self, _clocks: &mut ClockTree, _en: bool) {
///         todo!()
///     }
///
///     fn configure_function_clock_impl(
///         self,
///         _clocks: &mut ClockTree,
///         _old_config: Option<UartFunctionClockConfig>,
///         _new_config: UartFunctionClockConfig,
///     ) {
///         todo!()
///     }
///
///     // UART_BAUD_RATE_GENERATOR
///
///     fn enable_baud_rate_generator_impl(self, _clocks: &mut ClockTree, _en: bool) {
///         todo!()
///     }
///
///     fn configure_baud_rate_generator_impl(
///         self,
///         _clocks: &mut ClockTree,
///         _old_config: Option<UartBaudRateGeneratorConfig>,
///         _new_config: UartBaudRateGeneratorConfig,
///     ) {
///         todo!()
///     }
/// }
/// ```
macro_rules! define_clock_tree_types {
    () => {
        #[derive(Clone, Copy, PartialEq, Eq, Debug)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum TimgInstance {
            Timg0 = 0,
            Timg1 = 1,
        }
        #[derive(Clone, Copy, PartialEq, Eq, Debug)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum UartInstance {
            Uart0 = 0,
            Uart1 = 1,
        }
        /// Selects the output frequency of `XTAL_CLK`.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum XtalClkConfig {
            /// 40 MHz
            _40,
        }
        impl XtalClkConfig {
            pub fn value(&self) -> u32 {
                match self {
                    XtalClkConfig::_40 => 40000000,
                }
            }
        }
        /// The list of clock signals that the `HP_ROOT_CLK` multiplexer can output.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum HpRootClkConfig {
            /// Selects `XTAL_CLK`.
            Xtal,
            /// Selects `RC_FAST_CLK`.
            RcFast,
            /// Selects `PLL_F160M`.
            PllF160m,
        }
        /// Configures the `CPU_CLK` clock node.
        ///
        /// The output is calculated as `OUTPUT = HP_ROOT_CLK / (divisor + 1)`.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub struct CpuClkConfig {
            divisor: u32,
        }
        impl CpuClkConfig {
            /// Creates a new configuration for the CPU_CLK clock node.
            ///
            /// ## Panics
            ///
            /// Panics if the divisor value is outside the
            /// valid range (0 ..= 255).
            pub const fn new(divisor: u32) -> Self {
                ::core::assert!(
                    divisor <= 255,
                    "`CPU_CLK` divisor must be between 0 and 255 (inclusive)."
                );
                Self { divisor }
            }
            fn divisor(self) -> u32 {
                self.divisor as u32
            }
        }
        /// Configures the `AHB_CLK` clock node.
        ///
        /// The output is calculated as `OUTPUT = HP_ROOT_CLK / (divisor + 1)`.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub struct AhbClkConfig {
            divisor: u32,
        }
        impl AhbClkConfig {
            /// Creates a new configuration for the AHB_CLK clock node.
            ///
            /// ## Panics
            ///
            /// Panics if the divisor value is outside the
            /// valid range (0 ..= 255).
            pub const fn new(divisor: u32) -> Self {
                ::core::assert!(
                    divisor <= 255,
                    "`AHB_CLK` divisor must be between 0 and 255 (inclusive)."
                );
                Self { divisor }
            }
            fn divisor(self) -> u32 {
                self.divisor as u32
            }
        }
        /// Configures the `APB_CLK` clock node.
        ///
        /// The output is calculated as `OUTPUT = AHB_CLK / (divisor + 1)`.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub struct ApbClkConfig {
            divisor: u32,
        }
        impl ApbClkConfig {
            /// Creates a new configuration for the APB_CLK clock node.
            ///
            /// ## Panics
            ///
            /// Panics if the divisor value is outside the
            /// valid range (0 ..= 255).
            pub const fn new(divisor: u32) -> Self {
                ::core::assert!(
                    divisor <= 255,
                    "`APB_CLK` divisor must be between 0 and 255 (inclusive)."
                );
                Self { divisor }
            }
            fn divisor(self) -> u32 {
                self.divisor as u32
            }
        }
        /// The list of clock signals that the `LP_FAST_CLK` multiplexer can output.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum LpFastClkConfig {
            /// Selects `RC_FAST_CLK`.
            RcFast,
            /// Selects `XTAL_D2_CLK`.
            XtalD2,
            /// Selects `XTAL_CLK`.
            Xtal,
        }
        /// The list of clock signals that the `LP_SLOW_CLK` multiplexer can output.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum LpSlowClkConfig {
            /// Selects `RC_SLOW_CLK`.
            RcSlow,
            /// Selects `XTAL32K_CLK`.
            Xtal32k,
            /// Selects `OSC_SLOW_CLK`.
            OscSlow,
        }
        /// The list of clock signals that the `TIMG_CALIBRATION_CLOCK` multiplexer can output.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum TimgCalibrationClockConfig {
            /// Selects `OSC_SLOW_CLK`.
            OscSlowClk,
            /// Selects `RC_SLOW_CLK`.
            RcSlowClk,
            /// Selects `RC_FAST_CLK`.
            RcFastDivClk,
            /// Selects `XTAL32K_CLK`.
            Xtal32kClk,
        }
        /// The list of clock signals that the `TIMG0_FUNCTION_CLOCK` multiplexer can output.
        #[derive(Debug, Default, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum TimgFunctionClockConfig {
            #[default]
            /// Selects `XTAL_CLK`.
            XtalClk,
            /// Selects `RC_FAST_CLK`.
            RcFastClk,
            /// Selects `PLL_F80M`.
            PllF80m,
        }
        /// The list of clock signals that the `TIMG0_WDT_CLOCK` multiplexer can output.
        #[derive(Debug, Default, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum TimgWdtClockConfig {
            #[default]
            /// Selects `XTAL_CLK`.
            XtalClk,
            /// Selects `RC_FAST_CLK`.
            RcFastClk,
            /// Selects `PLL_F80M`.
            PllF80m,
        }
        #[derive(Debug, Default, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum UartFunctionClockSclk {
            #[default]
            /// Selects `XTAL_CLK`.
            Xtal,
            /// Selects `PLL_F80M`.
            PllF80m,
            /// Selects `RC_FAST_CLK`.
            RcFast,
        }
        /// Configures the `UART0_FUNCTION_CLOCK` clock node.
        ///
        /// The output is calculated as `OUTPUT = sclk / (div_num + 1)`.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub struct UartFunctionClockConfig {
            sclk: UartFunctionClockSclk,
            div_num: u32,
        }
        impl UartFunctionClockConfig {
            /// Creates a new configuration for the FUNCTION_CLOCK clock node.
            ///
            /// ## Panics
            ///
            /// Panics if the div_num value is outside the
            /// valid range (0 ..= 255).
            pub const fn new(sclk: UartFunctionClockSclk, div_num: u32) -> Self {
                ::core::assert!(
                    div_num <= 255,
                    "`UART0_FUNCTION_CLOCK` div_num must be between 0 and 255 (inclusive)."
                );
                Self { sclk, div_num }
            }
            fn sclk(self) -> UartFunctionClockSclk {
                self.sclk
            }
            fn div_num(self) -> u32 {
                self.div_num as u32
            }
        }
        /// Configures the `UART0_BAUD_RATE_GENERATOR` clock node.
        ///
        /// The output is calculated as `OUTPUT = (FUNCTION_CLOCK * 16) / (integral * 16 +
        /// fractional)`.
        #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub struct UartBaudRateGeneratorConfig {
            fractional: u32,
            integral: u32,
        }
        impl UartBaudRateGeneratorConfig {
            /// Creates a new configuration for the BAUD_RATE_GENERATOR clock node.
            ///
            /// ## Panics
            ///
            /// Panics if the fractional value is outside the
            /// valid range (0 ..= 15).
            ///
            /// Panics if the integral value is outside the
            /// valid range (0 ..= 4095).
            pub const fn new(fractional: u32, integral: u32) -> Self {
                ::core::assert!(
                    fractional <= 15,
                    "`UART0_BAUD_RATE_GENERATOR` fractional must be between 0 and 15 (inclusive)."
                );
                ::core::assert!(
                    integral <= 4095,
                    "`UART0_BAUD_RATE_GENERATOR` integral must be between 0 and 4095 (inclusive)."
                );
                Self {
                    fractional,
                    integral,
                }
            }
            fn fractional(self) -> u32 {
                self.fractional as u32
            }
            fn integral(self) -> u32 {
                self.integral as u32
            }
        }
        /// Represents the device's clock tree.
        pub struct ClockTree {
            xtal_clk: Option<XtalClkConfig>,
            hp_root_clk: Option<HpRootClkConfig>,
            cpu_clk: Option<CpuClkConfig>,
            ahb_clk: Option<AhbClkConfig>,
            apb_clk: Option<ApbClkConfig>,
            lp_fast_clk: Option<LpFastClkConfig>,
            lp_slow_clk: Option<LpSlowClkConfig>,
            timg_calibration_clock: Option<TimgCalibrationClockConfig>,
            timg_function_clock: [Option<TimgFunctionClockConfig>; 2],
            timg_wdt_clock: [Option<TimgWdtClockConfig>; 2],
            uart_function_clock: [Option<UartFunctionClockConfig>; 2],
            uart_baud_rate_generator: [Option<UartBaudRateGeneratorConfig>; 2],
            rc_fast_clk_refcount: u32,
            pll_clk_refcount: u32,
            xtal32k_clk_refcount: u32,
            osc_slow_clk_refcount: u32,
            rc_slow_clk_refcount: u32,
            pll_f20m_refcount: u32,
            pll_f40m_refcount: u32,
            pll_f48m_refcount: u32,
            pll_f60m_refcount: u32,
            pll_f80m_refcount: u32,
            pll_f120m_refcount: u32,
            hp_root_clk_refcount: u32,
            cpu_clk_refcount: u32,
            apb_clk_refcount: u32,
            lp_fast_clk_refcount: u32,
            lp_slow_clk_refcount: u32,
            timg_calibration_clock_refcount: u32,
            timg_function_clock_refcount: [u32; 2],
            timg_wdt_clock_refcount: [u32; 2],
            uart_function_clock_refcount: [u32; 2],
            uart_baud_rate_generator_refcount: [u32; 2],
        }
        impl ClockTree {
            /// Locks the clock tree for exclusive access.
            pub fn with<R>(f: impl FnOnce(&mut ClockTree) -> R) -> R {
                CLOCK_TREE.with(f)
            }
            /// Returns the current configuration of the XTAL_CLK clock tree node
            pub fn xtal_clk(&self) -> Option<XtalClkConfig> {
                self.xtal_clk
            }
            /// Returns the current configuration of the HP_ROOT_CLK clock tree node
            pub fn hp_root_clk(&self) -> Option<HpRootClkConfig> {
                self.hp_root_clk
            }
            /// Returns the current configuration of the CPU_CLK clock tree node
            pub fn cpu_clk(&self) -> Option<CpuClkConfig> {
                self.cpu_clk
            }
            /// Returns the current configuration of the AHB_CLK clock tree node
            pub fn ahb_clk(&self) -> Option<AhbClkConfig> {
                self.ahb_clk
            }
            /// Returns the current configuration of the APB_CLK clock tree node
            pub fn apb_clk(&self) -> Option<ApbClkConfig> {
                self.apb_clk
            }
            /// Returns the current configuration of the LP_FAST_CLK clock tree node
            pub fn lp_fast_clk(&self) -> Option<LpFastClkConfig> {
                self.lp_fast_clk
            }
            /// Returns the current configuration of the LP_SLOW_CLK clock tree node
            pub fn lp_slow_clk(&self) -> Option<LpSlowClkConfig> {
                self.lp_slow_clk
            }
            /// Returns the current configuration of the TIMG_CALIBRATION_CLOCK clock tree node
            pub fn timg_calibration_clock(&self) -> Option<TimgCalibrationClockConfig> {
                self.timg_calibration_clock
            }
            /// Returns the current configuration of the TIMG0_FUNCTION_CLOCK clock tree node
            pub fn timg0_function_clock(&self) -> Option<TimgFunctionClockConfig> {
                self.timg_function_clock[TimgInstance::Timg0 as usize]
            }
            /// Returns the current configuration of the TIMG0_WDT_CLOCK clock tree node
            pub fn timg0_wdt_clock(&self) -> Option<TimgWdtClockConfig> {
                self.timg_wdt_clock[TimgInstance::Timg0 as usize]
            }
            /// Returns the current configuration of the TIMG1_FUNCTION_CLOCK clock tree node
            pub fn timg1_function_clock(&self) -> Option<TimgFunctionClockConfig> {
                self.timg_function_clock[TimgInstance::Timg1 as usize]
            }
            /// Returns the current configuration of the TIMG1_WDT_CLOCK clock tree node
            pub fn timg1_wdt_clock(&self) -> Option<TimgWdtClockConfig> {
                self.timg_wdt_clock[TimgInstance::Timg1 as usize]
            }
            /// Returns the current configuration of the UART0_FUNCTION_CLOCK clock tree node
            pub fn uart0_function_clock(&self) -> Option<UartFunctionClockConfig> {
                self.uart_function_clock[UartInstance::Uart0 as usize]
            }
            /// Returns the current configuration of the UART0_BAUD_RATE_GENERATOR clock tree node
            pub fn uart0_baud_rate_generator(&self) -> Option<UartBaudRateGeneratorConfig> {
                self.uart_baud_rate_generator[UartInstance::Uart0 as usize]
            }
            /// Returns the current configuration of the UART1_FUNCTION_CLOCK clock tree node
            pub fn uart1_function_clock(&self) -> Option<UartFunctionClockConfig> {
                self.uart_function_clock[UartInstance::Uart1 as usize]
            }
            /// Returns the current configuration of the UART1_BAUD_RATE_GENERATOR clock tree node
            pub fn uart1_baud_rate_generator(&self) -> Option<UartBaudRateGeneratorConfig> {
                self.uart_baud_rate_generator[UartInstance::Uart1 as usize]
            }
        }
        static CLOCK_TREE: ::esp_sync::NonReentrantMutex<ClockTree> =
            ::esp_sync::NonReentrantMutex::new(ClockTree {
                xtal_clk: None,
                hp_root_clk: None,
                cpu_clk: None,
                ahb_clk: None,
                apb_clk: None,
                lp_fast_clk: None,
                lp_slow_clk: None,
                timg_calibration_clock: None,
                timg_function_clock: [None; 2],
                timg_wdt_clock: [None; 2],
                uart_function_clock: [None; 2],
                uart_baud_rate_generator: [None; 2],
                rc_fast_clk_refcount: 0,
                pll_clk_refcount: 0,
                xtal32k_clk_refcount: 0,
                osc_slow_clk_refcount: 0,
                rc_slow_clk_refcount: 0,
                pll_f20m_refcount: 0,
                pll_f40m_refcount: 0,
                pll_f48m_refcount: 0,
                pll_f60m_refcount: 0,
                pll_f80m_refcount: 0,
                pll_f120m_refcount: 0,
                hp_root_clk_refcount: 0,
                cpu_clk_refcount: 0,
                apb_clk_refcount: 0,
                lp_fast_clk_refcount: 0,
                lp_slow_clk_refcount: 0,
                timg_calibration_clock_refcount: 0,
                timg_function_clock_refcount: [0; 2],
                timg_wdt_clock_refcount: [0; 2],
                uart_function_clock_refcount: [0; 2],
                uart_baud_rate_generator_refcount: [0; 2],
            });
        pub fn configure_xtal_clk(clocks: &mut ClockTree, config: XtalClkConfig) {
            let old_config = clocks.xtal_clk.replace(config);
            configure_xtal_clk_impl(clocks, old_config, config);
        }
        pub fn xtal_clk_config(clocks: &mut ClockTree) -> Option<XtalClkConfig> {
            clocks.xtal_clk
        }
        fn request_xtal_clk(_clocks: &mut ClockTree) {}
        fn release_xtal_clk(_clocks: &mut ClockTree) {}
        #[allow(unused_variables)]
        pub fn xtal_clk_config_frequency(clocks: &mut ClockTree, config: XtalClkConfig) -> u32 {
            config.value()
        }
        pub fn xtal_clk_frequency(clocks: &mut ClockTree) -> u32 {
            if let Some(config) = clocks.xtal_clk {
                xtal_clk_config_frequency(clocks, config)
            } else {
                0
            }
        }
        pub fn request_rc_fast_clk(clocks: &mut ClockTree) {
            trace!("Requesting RC_FAST_CLK");
            if increment_reference_count(&mut clocks.rc_fast_clk_refcount) {
                trace!("Enabling RC_FAST_CLK");
                enable_rc_fast_clk_impl(clocks, true);
            }
        }
        pub fn release_rc_fast_clk(clocks: &mut ClockTree) {
            trace!("Releasing RC_FAST_CLK");
            if decrement_reference_count(&mut clocks.rc_fast_clk_refcount) {
                trace!("Disabling RC_FAST_CLK");
                enable_rc_fast_clk_impl(clocks, false);
            }
        }
        pub fn rc_fast_clk_frequency(clocks: &mut ClockTree) -> u32 {
            17500000
        }
        pub fn request_pll_clk(clocks: &mut ClockTree) {
            trace!("Requesting PLL_CLK");
            if increment_reference_count(&mut clocks.pll_clk_refcount) {
                trace!("Enabling PLL_CLK");
                request_xtal_clk(clocks);
                enable_pll_clk_impl(clocks, true);
            }
        }
        pub fn release_pll_clk(clocks: &mut ClockTree) {
            trace!("Releasing PLL_CLK");
            if decrement_reference_count(&mut clocks.pll_clk_refcount) {
                trace!("Disabling PLL_CLK");
                enable_pll_clk_impl(clocks, false);
                release_xtal_clk(clocks);
            }
        }
        pub fn pll_clk_frequency(clocks: &mut ClockTree) -> u32 {
            480000000
        }
        pub fn request_xtal32k_clk(clocks: &mut ClockTree) {
            trace!("Requesting XTAL32K_CLK");
            if increment_reference_count(&mut clocks.xtal32k_clk_refcount) {
                trace!("Enabling XTAL32K_CLK");
                enable_xtal32k_clk_impl(clocks, true);
            }
        }
        pub fn release_xtal32k_clk(clocks: &mut ClockTree) {
            trace!("Releasing XTAL32K_CLK");
            if decrement_reference_count(&mut clocks.xtal32k_clk_refcount) {
                trace!("Disabling XTAL32K_CLK");
                enable_xtal32k_clk_impl(clocks, false);
            }
        }
        pub fn xtal32k_clk_frequency(clocks: &mut ClockTree) -> u32 {
            32768
        }
        pub fn request_osc_slow_clk(clocks: &mut ClockTree) {
            trace!("Requesting OSC_SLOW_CLK");
            if increment_reference_count(&mut clocks.osc_slow_clk_refcount) {
                trace!("Enabling OSC_SLOW_CLK");
                enable_osc_slow_clk_impl(clocks, true);
            }
        }
        pub fn release_osc_slow_clk(clocks: &mut ClockTree) {
            trace!("Releasing OSC_SLOW_CLK");
            if decrement_reference_count(&mut clocks.osc_slow_clk_refcount) {
                trace!("Disabling OSC_SLOW_CLK");
                enable_osc_slow_clk_impl(clocks, false);
            }
        }
        pub fn osc_slow_clk_frequency(clocks: &mut ClockTree) -> u32 {
            32768
        }
        pub fn request_rc_slow_clk(clocks: &mut ClockTree) {
            trace!("Requesting RC_SLOW_CLK");
            if increment_reference_count(&mut clocks.rc_slow_clk_refcount) {
                trace!("Enabling RC_SLOW_CLK");
                enable_rc_slow_clk_impl(clocks, true);
            }
        }
        pub fn release_rc_slow_clk(clocks: &mut ClockTree) {
            trace!("Releasing RC_SLOW_CLK");
            if decrement_reference_count(&mut clocks.rc_slow_clk_refcount) {
                trace!("Disabling RC_SLOW_CLK");
                enable_rc_slow_clk_impl(clocks, false);
            }
        }
        pub fn rc_slow_clk_frequency(clocks: &mut ClockTree) -> u32 {
            136000
        }
        pub fn request_pll_f20m(clocks: &mut ClockTree) {
            trace!("Requesting PLL_F20M");
            if increment_reference_count(&mut clocks.pll_f20m_refcount) {
                trace!("Enabling PLL_F20M");
                request_pll_clk(clocks);
                enable_pll_f20m_impl(clocks, true);
            }
        }
        pub fn release_pll_f20m(clocks: &mut ClockTree) {
            trace!("Releasing PLL_F20M");
            if decrement_reference_count(&mut clocks.pll_f20m_refcount) {
                trace!("Disabling PLL_F20M");
                enable_pll_f20m_impl(clocks, false);
                release_pll_clk(clocks);
            }
        }
        pub fn pll_f20m_frequency(clocks: &mut ClockTree) -> u32 {
            (pll_clk_frequency(clocks) / 24)
        }
        pub fn request_pll_f40m(clocks: &mut ClockTree) {
            trace!("Requesting PLL_F40M");
            if increment_reference_count(&mut clocks.pll_f40m_refcount) {
                trace!("Enabling PLL_F40M");
                request_pll_clk(clocks);
                enable_pll_f40m_impl(clocks, true);
            }
        }
        pub fn release_pll_f40m(clocks: &mut ClockTree) {
            trace!("Releasing PLL_F40M");
            if decrement_reference_count(&mut clocks.pll_f40m_refcount) {
                trace!("Disabling PLL_F40M");
                enable_pll_f40m_impl(clocks, false);
                release_pll_clk(clocks);
            }
        }
        pub fn pll_f40m_frequency(clocks: &mut ClockTree) -> u32 {
            (pll_clk_frequency(clocks) / 12)
        }
        pub fn request_pll_f48m(clocks: &mut ClockTree) {
            trace!("Requesting PLL_F48M");
            if increment_reference_count(&mut clocks.pll_f48m_refcount) {
                trace!("Enabling PLL_F48M");
                request_pll_clk(clocks);
                enable_pll_f48m_impl(clocks, true);
            }
        }
        pub fn release_pll_f48m(clocks: &mut ClockTree) {
            trace!("Releasing PLL_F48M");
            if decrement_reference_count(&mut clocks.pll_f48m_refcount) {
                trace!("Disabling PLL_F48M");
                enable_pll_f48m_impl(clocks, false);
                release_pll_clk(clocks);
            }
        }
        pub fn pll_f48m_frequency(clocks: &mut ClockTree) -> u32 {
            (pll_clk_frequency(clocks) / 10)
        }
        pub fn request_pll_f60m(clocks: &mut ClockTree) {
            trace!("Requesting PLL_F60M");
            if increment_reference_count(&mut clocks.pll_f60m_refcount) {
                trace!("Enabling PLL_F60M");
                request_pll_clk(clocks);
                enable_pll_f60m_impl(clocks, true);
            }
        }
        pub fn release_pll_f60m(clocks: &mut ClockTree) {
            trace!("Releasing PLL_F60M");
            if decrement_reference_count(&mut clocks.pll_f60m_refcount) {
                trace!("Disabling PLL_F60M");
                enable_pll_f60m_impl(clocks, false);
                release_pll_clk(clocks);
            }
        }
        pub fn pll_f60m_frequency(clocks: &mut ClockTree) -> u32 {
            (pll_clk_frequency(clocks) / 8)
        }
        pub fn request_pll_f80m(clocks: &mut ClockTree) {
            trace!("Requesting PLL_F80M");
            if increment_reference_count(&mut clocks.pll_f80m_refcount) {
                trace!("Enabling PLL_F80M");
                request_pll_clk(clocks);
                enable_pll_f80m_impl(clocks, true);
            }
        }
        pub fn release_pll_f80m(clocks: &mut ClockTree) {
            trace!("Releasing PLL_F80M");
            if decrement_reference_count(&mut clocks.pll_f80m_refcount) {
                trace!("Disabling PLL_F80M");
                enable_pll_f80m_impl(clocks, false);
                release_pll_clk(clocks);
            }
        }
        pub fn pll_f80m_frequency(clocks: &mut ClockTree) -> u32 {
            (pll_clk_frequency(clocks) / 6)
        }
        pub fn request_pll_f120m(clocks: &mut ClockTree) {
            trace!("Requesting PLL_F120M");
            if increment_reference_count(&mut clocks.pll_f120m_refcount) {
                trace!("Enabling PLL_F120M");
                request_pll_clk(clocks);
                enable_pll_f120m_impl(clocks, true);
            }
        }
        pub fn release_pll_f120m(clocks: &mut ClockTree) {
            trace!("Releasing PLL_F120M");
            if decrement_reference_count(&mut clocks.pll_f120m_refcount) {
                trace!("Disabling PLL_F120M");
                enable_pll_f120m_impl(clocks, false);
                release_pll_clk(clocks);
            }
        }
        pub fn pll_f120m_frequency(clocks: &mut ClockTree) -> u32 {
            (pll_clk_frequency(clocks) / 4)
        }
        pub fn request_pll_f160m(clocks: &mut ClockTree) {
            trace!("Requesting PLL_F160M");
            trace!("Enabling PLL_F160M");
            request_pll_clk(clocks);
            enable_pll_f160m_impl(clocks, true);
        }
        pub fn release_pll_f160m(clocks: &mut ClockTree) {
            trace!("Releasing PLL_F160M");
            trace!("Disabling PLL_F160M");
            enable_pll_f160m_impl(clocks, false);
            release_pll_clk(clocks);
        }
        pub fn pll_f160m_frequency(clocks: &mut ClockTree) -> u32 {
            (pll_clk_frequency(clocks) / 3)
        }
        pub fn configure_hp_root_clk(clocks: &mut ClockTree, new_selector: HpRootClkConfig) {
            let old_selector = clocks.hp_root_clk.replace(new_selector);
            if clocks.hp_root_clk_refcount > 0 {
                match new_selector {
                    HpRootClkConfig::Xtal => request_xtal_clk(clocks),
                    HpRootClkConfig::RcFast => request_rc_fast_clk(clocks),
                    HpRootClkConfig::PllF160m => request_pll_f160m(clocks),
                }
                configure_hp_root_clk_impl(clocks, old_selector, new_selector);
                if let Some(old_selector) = old_selector {
                    match old_selector {
                        HpRootClkConfig::Xtal => release_xtal_clk(clocks),
                        HpRootClkConfig::RcFast => release_rc_fast_clk(clocks),
                        HpRootClkConfig::PllF160m => release_pll_f160m(clocks),
                    }
                }
            } else {
                configure_hp_root_clk_impl(clocks, old_selector, new_selector);
            }
        }
        pub fn hp_root_clk_config(clocks: &mut ClockTree) -> Option<HpRootClkConfig> {
            clocks.hp_root_clk
        }
        pub fn request_hp_root_clk(clocks: &mut ClockTree) {
            trace!("Requesting HP_ROOT_CLK");
            if increment_reference_count(&mut clocks.hp_root_clk_refcount) {
                trace!("Enabling HP_ROOT_CLK");
                match unwrap!(clocks.hp_root_clk) {
                    HpRootClkConfig::Xtal => request_xtal_clk(clocks),
                    HpRootClkConfig::RcFast => request_rc_fast_clk(clocks),
                    HpRootClkConfig::PllF160m => request_pll_f160m(clocks),
                }
                enable_hp_root_clk_impl(clocks, true);
            }
        }
        pub fn release_hp_root_clk(clocks: &mut ClockTree) {
            trace!("Releasing HP_ROOT_CLK");
            if decrement_reference_count(&mut clocks.hp_root_clk_refcount) {
                trace!("Disabling HP_ROOT_CLK");
                enable_hp_root_clk_impl(clocks, false);
                match unwrap!(clocks.hp_root_clk) {
                    HpRootClkConfig::Xtal => release_xtal_clk(clocks),
                    HpRootClkConfig::RcFast => release_rc_fast_clk(clocks),
                    HpRootClkConfig::PllF160m => release_pll_f160m(clocks),
                }
            }
        }
        #[allow(unused_variables)]
        pub fn hp_root_clk_config_frequency(
            clocks: &mut ClockTree,
            config: HpRootClkConfig,
        ) -> u32 {
            match config {
                HpRootClkConfig::Xtal => xtal_clk_frequency(clocks),
                HpRootClkConfig::RcFast => rc_fast_clk_frequency(clocks),
                HpRootClkConfig::PllF160m => pll_f160m_frequency(clocks),
            }
        }
        pub fn hp_root_clk_frequency(clocks: &mut ClockTree) -> u32 {
            if let Some(config) = clocks.hp_root_clk {
                hp_root_clk_config_frequency(clocks, config)
            } else {
                0
            }
        }
        pub fn configure_cpu_clk(clocks: &mut ClockTree, config: CpuClkConfig) {
            let old_config = clocks.cpu_clk.replace(config);
            configure_cpu_clk_impl(clocks, old_config, config);
        }
        pub fn cpu_clk_config(clocks: &mut ClockTree) -> Option<CpuClkConfig> {
            clocks.cpu_clk
        }
        pub fn request_cpu_clk(clocks: &mut ClockTree) {
            trace!("Requesting CPU_CLK");
            if increment_reference_count(&mut clocks.cpu_clk_refcount) {
                trace!("Enabling CPU_CLK");
                request_hp_root_clk(clocks);
                enable_cpu_clk_impl(clocks, true);
            }
        }
        pub fn release_cpu_clk(clocks: &mut ClockTree) {
            trace!("Releasing CPU_CLK");
            if decrement_reference_count(&mut clocks.cpu_clk_refcount) {
                trace!("Disabling CPU_CLK");
                enable_cpu_clk_impl(clocks, false);
                release_hp_root_clk(clocks);
            }
        }
        #[allow(unused_variables)]
        pub fn cpu_clk_config_frequency(clocks: &mut ClockTree, config: CpuClkConfig) -> u32 {
            (hp_root_clk_frequency(clocks) / (config.divisor() + 1))
        }
        pub fn cpu_clk_frequency(clocks: &mut ClockTree) -> u32 {
            if let Some(config) = clocks.cpu_clk {
                cpu_clk_config_frequency(clocks, config)
            } else {
                0
            }
        }
        pub fn configure_ahb_clk(clocks: &mut ClockTree, config: AhbClkConfig) {
            let old_config = clocks.ahb_clk.replace(config);
            configure_ahb_clk_impl(clocks, old_config, config);
        }
        pub fn ahb_clk_config(clocks: &mut ClockTree) -> Option<AhbClkConfig> {
            clocks.ahb_clk
        }
        pub fn request_ahb_clk(clocks: &mut ClockTree) {
            trace!("Requesting AHB_CLK");
            trace!("Enabling AHB_CLK");
            request_hp_root_clk(clocks);
            enable_ahb_clk_impl(clocks, true);
        }
        pub fn release_ahb_clk(clocks: &mut ClockTree) {
            trace!("Releasing AHB_CLK");
            trace!("Disabling AHB_CLK");
            enable_ahb_clk_impl(clocks, false);
            release_hp_root_clk(clocks);
        }
        #[allow(unused_variables)]
        pub fn ahb_clk_config_frequency(clocks: &mut ClockTree, config: AhbClkConfig) -> u32 {
            (hp_root_clk_frequency(clocks) / (config.divisor() + 1))
        }
        pub fn ahb_clk_frequency(clocks: &mut ClockTree) -> u32 {
            if let Some(config) = clocks.ahb_clk {
                ahb_clk_config_frequency(clocks, config)
            } else {
                0
            }
        }
        pub fn configure_apb_clk(clocks: &mut ClockTree, config: ApbClkConfig) {
            let old_config = clocks.apb_clk.replace(config);
            configure_apb_clk_impl(clocks, old_config, config);
        }
        pub fn apb_clk_config(clocks: &mut ClockTree) -> Option<ApbClkConfig> {
            clocks.apb_clk
        }
        pub fn request_apb_clk(clocks: &mut ClockTree) {
            trace!("Requesting APB_CLK");
            if increment_reference_count(&mut clocks.apb_clk_refcount) {
                trace!("Enabling APB_CLK");
                request_ahb_clk(clocks);
                enable_apb_clk_impl(clocks, true);
            }
        }
        pub fn release_apb_clk(clocks: &mut ClockTree) {
            trace!("Releasing APB_CLK");
            if decrement_reference_count(&mut clocks.apb_clk_refcount) {
                trace!("Disabling APB_CLK");
                enable_apb_clk_impl(clocks, false);
                release_ahb_clk(clocks);
            }
        }
        #[allow(unused_variables)]
        pub fn apb_clk_config_frequency(clocks: &mut ClockTree, config: ApbClkConfig) -> u32 {
            (ahb_clk_frequency(clocks) / (config.divisor() + 1))
        }
        pub fn apb_clk_frequency(clocks: &mut ClockTree) -> u32 {
            if let Some(config) = clocks.apb_clk {
                apb_clk_config_frequency(clocks, config)
            } else {
                0
            }
        }
        pub fn request_xtal_d2_clk(clocks: &mut ClockTree) {
            trace!("Requesting XTAL_D2_CLK");
            trace!("Enabling XTAL_D2_CLK");
            request_xtal_clk(clocks);
            enable_xtal_d2_clk_impl(clocks, true);
        }
        pub fn release_xtal_d2_clk(clocks: &mut ClockTree) {
            trace!("Releasing XTAL_D2_CLK");
            trace!("Disabling XTAL_D2_CLK");
            enable_xtal_d2_clk_impl(clocks, false);
            release_xtal_clk(clocks);
        }
        pub fn xtal_d2_clk_frequency(clocks: &mut ClockTree) -> u32 {
            (xtal_clk_frequency(clocks) / 2)
        }
        pub fn configure_lp_fast_clk(clocks: &mut ClockTree, new_selector: LpFastClkConfig) {
            let old_selector = clocks.lp_fast_clk.replace(new_selector);
            if clocks.lp_fast_clk_refcount > 0 {
                match new_selector {
                    LpFastClkConfig::RcFast => request_rc_fast_clk(clocks),
                    LpFastClkConfig::XtalD2 => request_xtal_d2_clk(clocks),
                    LpFastClkConfig::Xtal => request_xtal_clk(clocks),
                }
                configure_lp_fast_clk_impl(clocks, old_selector, new_selector);
                if let Some(old_selector) = old_selector {
                    match old_selector {
                        LpFastClkConfig::RcFast => release_rc_fast_clk(clocks),
                        LpFastClkConfig::XtalD2 => release_xtal_d2_clk(clocks),
                        LpFastClkConfig::Xtal => release_xtal_clk(clocks),
                    }
                }
            } else {
                configure_lp_fast_clk_impl(clocks, old_selector, new_selector);
            }
        }
        pub fn lp_fast_clk_config(clocks: &mut ClockTree) -> Option<LpFastClkConfig> {
            clocks.lp_fast_clk
        }
        pub fn request_lp_fast_clk(clocks: &mut ClockTree) {
            trace!("Requesting LP_FAST_CLK");
            if increment_reference_count(&mut clocks.lp_fast_clk_refcount) {
                trace!("Enabling LP_FAST_CLK");
                match unwrap!(clocks.lp_fast_clk) {
                    LpFastClkConfig::RcFast => request_rc_fast_clk(clocks),
                    LpFastClkConfig::XtalD2 => request_xtal_d2_clk(clocks),
                    LpFastClkConfig::Xtal => request_xtal_clk(clocks),
                }
                enable_lp_fast_clk_impl(clocks, true);
            }
        }
        pub fn release_lp_fast_clk(clocks: &mut ClockTree) {
            trace!("Releasing LP_FAST_CLK");
            if decrement_reference_count(&mut clocks.lp_fast_clk_refcount) {
                trace!("Disabling LP_FAST_CLK");
                enable_lp_fast_clk_impl(clocks, false);
                match unwrap!(clocks.lp_fast_clk) {
                    LpFastClkConfig::RcFast => release_rc_fast_clk(clocks),
                    LpFastClkConfig::XtalD2 => release_xtal_d2_clk(clocks),
                    LpFastClkConfig::Xtal => release_xtal_clk(clocks),
                }
            }
        }
        #[allow(unused_variables)]
        pub fn lp_fast_clk_config_frequency(
            clocks: &mut ClockTree,
            config: LpFastClkConfig,
        ) -> u32 {
            match config {
                LpFastClkConfig::RcFast => rc_fast_clk_frequency(clocks),
                LpFastClkConfig::XtalD2 => xtal_d2_clk_frequency(clocks),
                LpFastClkConfig::Xtal => xtal_clk_frequency(clocks),
            }
        }
        pub fn lp_fast_clk_frequency(clocks: &mut ClockTree) -> u32 {
            if let Some(config) = clocks.lp_fast_clk {
                lp_fast_clk_config_frequency(clocks, config)
            } else {
                0
            }
        }
        pub fn configure_lp_slow_clk(clocks: &mut ClockTree, new_selector: LpSlowClkConfig) {
            let old_selector = clocks.lp_slow_clk.replace(new_selector);
            if clocks.lp_slow_clk_refcount > 0 {
                match new_selector {
                    LpSlowClkConfig::RcSlow => request_rc_slow_clk(clocks),
                    LpSlowClkConfig::Xtal32k => request_xtal32k_clk(clocks),
                    LpSlowClkConfig::OscSlow => request_osc_slow_clk(clocks),
                }
                configure_lp_slow_clk_impl(clocks, old_selector, new_selector);
                if let Some(old_selector) = old_selector {
                    match old_selector {
                        LpSlowClkConfig::RcSlow => release_rc_slow_clk(clocks),
                        LpSlowClkConfig::Xtal32k => release_xtal32k_clk(clocks),
                        LpSlowClkConfig::OscSlow => release_osc_slow_clk(clocks),
                    }
                }
            } else {
                configure_lp_slow_clk_impl(clocks, old_selector, new_selector);
            }
        }
        pub fn lp_slow_clk_config(clocks: &mut ClockTree) -> Option<LpSlowClkConfig> {
            clocks.lp_slow_clk
        }
        pub fn request_lp_slow_clk(clocks: &mut ClockTree) {
            trace!("Requesting LP_SLOW_CLK");
            if increment_reference_count(&mut clocks.lp_slow_clk_refcount) {
                trace!("Enabling LP_SLOW_CLK");
                match unwrap!(clocks.lp_slow_clk) {
                    LpSlowClkConfig::RcSlow => request_rc_slow_clk(clocks),
                    LpSlowClkConfig::Xtal32k => request_xtal32k_clk(clocks),
                    LpSlowClkConfig::OscSlow => request_osc_slow_clk(clocks),
                }
                enable_lp_slow_clk_impl(clocks, true);
            }
        }
        pub fn release_lp_slow_clk(clocks: &mut ClockTree) {
            trace!("Releasing LP_SLOW_CLK");
            if decrement_reference_count(&mut clocks.lp_slow_clk_refcount) {
                trace!("Disabling LP_SLOW_CLK");
                enable_lp_slow_clk_impl(clocks, false);
                match unwrap!(clocks.lp_slow_clk) {
                    LpSlowClkConfig::RcSlow => release_rc_slow_clk(clocks),
                    LpSlowClkConfig::Xtal32k => release_xtal32k_clk(clocks),
                    LpSlowClkConfig::OscSlow => release_osc_slow_clk(clocks),
                }
            }
        }
        #[allow(unused_variables)]
        pub fn lp_slow_clk_config_frequency(
            clocks: &mut ClockTree,
            config: LpSlowClkConfig,
        ) -> u32 {
            match config {
                LpSlowClkConfig::RcSlow => rc_slow_clk_frequency(clocks),
                LpSlowClkConfig::Xtal32k => xtal32k_clk_frequency(clocks),
                LpSlowClkConfig::OscSlow => osc_slow_clk_frequency(clocks),
            }
        }
        pub fn lp_slow_clk_frequency(clocks: &mut ClockTree) -> u32 {
            if let Some(config) = clocks.lp_slow_clk {
                lp_slow_clk_config_frequency(clocks, config)
            } else {
                0
            }
        }
        pub fn configure_timg_calibration_clock(
            clocks: &mut ClockTree,
            new_selector: TimgCalibrationClockConfig,
        ) {
            let old_selector = clocks.timg_calibration_clock.replace(new_selector);
            if clocks.timg_calibration_clock_refcount > 0 {
                match new_selector {
                    TimgCalibrationClockConfig::OscSlowClk => request_osc_slow_clk(clocks),
                    TimgCalibrationClockConfig::RcSlowClk => request_rc_slow_clk(clocks),
                    TimgCalibrationClockConfig::RcFastDivClk => request_rc_fast_clk(clocks),
                    TimgCalibrationClockConfig::Xtal32kClk => request_xtal32k_clk(clocks),
                }
                configure_timg_calibration_clock_impl(clocks, old_selector, new_selector);
                if let Some(old_selector) = old_selector {
                    match old_selector {
                        TimgCalibrationClockConfig::OscSlowClk => release_osc_slow_clk(clocks),
                        TimgCalibrationClockConfig::RcSlowClk => release_rc_slow_clk(clocks),
                        TimgCalibrationClockConfig::RcFastDivClk => release_rc_fast_clk(clocks),
                        TimgCalibrationClockConfig::Xtal32kClk => release_xtal32k_clk(clocks),
                    }
                }
            } else {
                configure_timg_calibration_clock_impl(clocks, old_selector, new_selector);
            }
        }
        pub fn timg_calibration_clock_config(
            clocks: &mut ClockTree,
        ) -> Option<TimgCalibrationClockConfig> {
            clocks.timg_calibration_clock
        }
        pub fn request_timg_calibration_clock(clocks: &mut ClockTree) {
            trace!("Requesting TIMG_CALIBRATION_CLOCK");
            if increment_reference_count(&mut clocks.timg_calibration_clock_refcount) {
                trace!("Enabling TIMG_CALIBRATION_CLOCK");
                match unwrap!(clocks.timg_calibration_clock) {
                    TimgCalibrationClockConfig::OscSlowClk => request_osc_slow_clk(clocks),
                    TimgCalibrationClockConfig::RcSlowClk => request_rc_slow_clk(clocks),
                    TimgCalibrationClockConfig::RcFastDivClk => request_rc_fast_clk(clocks),
                    TimgCalibrationClockConfig::Xtal32kClk => request_xtal32k_clk(clocks),
                }
                enable_timg_calibration_clock_impl(clocks, true);
            }
        }
        pub fn release_timg_calibration_clock(clocks: &mut ClockTree) {
            trace!("Releasing TIMG_CALIBRATION_CLOCK");
            if decrement_reference_count(&mut clocks.timg_calibration_clock_refcount) {
                trace!("Disabling TIMG_CALIBRATION_CLOCK");
                enable_timg_calibration_clock_impl(clocks, false);
                match unwrap!(clocks.timg_calibration_clock) {
                    TimgCalibrationClockConfig::OscSlowClk => release_osc_slow_clk(clocks),
                    TimgCalibrationClockConfig::RcSlowClk => release_rc_slow_clk(clocks),
                    TimgCalibrationClockConfig::RcFastDivClk => release_rc_fast_clk(clocks),
                    TimgCalibrationClockConfig::Xtal32kClk => release_xtal32k_clk(clocks),
                }
            }
        }
        #[allow(unused_variables)]
        pub fn timg_calibration_clock_config_frequency(
            clocks: &mut ClockTree,
            config: TimgCalibrationClockConfig,
        ) -> u32 {
            match config {
                TimgCalibrationClockConfig::OscSlowClk => osc_slow_clk_frequency(clocks),
                TimgCalibrationClockConfig::RcSlowClk => rc_slow_clk_frequency(clocks),
                TimgCalibrationClockConfig::RcFastDivClk => rc_fast_clk_frequency(clocks),
                TimgCalibrationClockConfig::Xtal32kClk => xtal32k_clk_frequency(clocks),
            }
        }
        pub fn timg_calibration_clock_frequency(clocks: &mut ClockTree) -> u32 {
            if let Some(config) = clocks.timg_calibration_clock {
                timg_calibration_clock_config_frequency(clocks, config)
            } else {
                0
            }
        }
        impl TimgInstance {
            pub fn configure_function_clock(
                self,
                clocks: &mut ClockTree,
                new_selector: TimgFunctionClockConfig,
            ) {
                let old_selector = clocks.timg_function_clock[self as usize].replace(new_selector);
                if clocks.timg_function_clock_refcount[self as usize] > 0 {
                    match new_selector {
                        TimgFunctionClockConfig::XtalClk => request_xtal_clk(clocks),
                        TimgFunctionClockConfig::RcFastClk => request_rc_fast_clk(clocks),
                        TimgFunctionClockConfig::PllF80m => request_pll_f80m(clocks),
                    }
                    self.configure_function_clock_impl(clocks, old_selector, new_selector);
                    if let Some(old_selector) = old_selector {
                        match old_selector {
                            TimgFunctionClockConfig::XtalClk => release_xtal_clk(clocks),
                            TimgFunctionClockConfig::RcFastClk => release_rc_fast_clk(clocks),
                            TimgFunctionClockConfig::PllF80m => release_pll_f80m(clocks),
                        }
                    }
                } else {
                    self.configure_function_clock_impl(clocks, old_selector, new_selector);
                }
            }
            pub fn function_clock_config(
                self,
                clocks: &mut ClockTree,
            ) -> Option<TimgFunctionClockConfig> {
                clocks.timg_function_clock[self as usize]
            }
            pub fn request_function_clock(self, clocks: &mut ClockTree) {
                trace!("Requesting {:?}::FUNCTION_CLOCK", self);
                if increment_reference_count(
                    &mut clocks.timg_function_clock_refcount[self as usize],
                ) {
                    trace!("Enabling {:?}::FUNCTION_CLOCK", self);
                    match unwrap!(clocks.timg_function_clock[self as usize]) {
                        TimgFunctionClockConfig::XtalClk => request_xtal_clk(clocks),
                        TimgFunctionClockConfig::RcFastClk => request_rc_fast_clk(clocks),
                        TimgFunctionClockConfig::PllF80m => request_pll_f80m(clocks),
                    }
                    self.enable_function_clock_impl(clocks, true);
                }
            }
            pub fn release_function_clock(self, clocks: &mut ClockTree) {
                trace!("Releasing {:?}::FUNCTION_CLOCK", self);
                if decrement_reference_count(
                    &mut clocks.timg_function_clock_refcount[self as usize],
                ) {
                    trace!("Disabling {:?}::FUNCTION_CLOCK", self);
                    self.enable_function_clock_impl(clocks, false);
                    match unwrap!(clocks.timg_function_clock[self as usize]) {
                        TimgFunctionClockConfig::XtalClk => release_xtal_clk(clocks),
                        TimgFunctionClockConfig::RcFastClk => release_rc_fast_clk(clocks),
                        TimgFunctionClockConfig::PllF80m => release_pll_f80m(clocks),
                    }
                }
            }
            #[allow(unused_variables)]
            pub fn function_clock_config_frequency(
                self,
                clocks: &mut ClockTree,
                config: TimgFunctionClockConfig,
            ) -> u32 {
                match config {
                    TimgFunctionClockConfig::XtalClk => xtal_clk_frequency(clocks),
                    TimgFunctionClockConfig::RcFastClk => rc_fast_clk_frequency(clocks),
                    TimgFunctionClockConfig::PllF80m => pll_f80m_frequency(clocks),
                }
            }
            pub fn function_clock_frequency(self, clocks: &mut ClockTree) -> u32 {
                if let Some(config) = clocks.timg_function_clock[self as usize] {
                    self.function_clock_config_frequency(clocks, config)
                } else {
                    0
                }
            }
            pub fn configure_wdt_clock(
                self,
                clocks: &mut ClockTree,
                new_selector: TimgWdtClockConfig,
            ) {
                let old_selector = clocks.timg_wdt_clock[self as usize].replace(new_selector);
                if clocks.timg_wdt_clock_refcount[self as usize] > 0 {
                    match new_selector {
                        TimgWdtClockConfig::XtalClk => request_xtal_clk(clocks),
                        TimgWdtClockConfig::RcFastClk => request_rc_fast_clk(clocks),
                        TimgWdtClockConfig::PllF80m => request_pll_f80m(clocks),
                    }
                    self.configure_wdt_clock_impl(clocks, old_selector, new_selector);
                    if let Some(old_selector) = old_selector {
                        match old_selector {
                            TimgWdtClockConfig::XtalClk => release_xtal_clk(clocks),
                            TimgWdtClockConfig::RcFastClk => release_rc_fast_clk(clocks),
                            TimgWdtClockConfig::PllF80m => release_pll_f80m(clocks),
                        }
                    }
                } else {
                    self.configure_wdt_clock_impl(clocks, old_selector, new_selector);
                }
            }
            pub fn wdt_clock_config(self, clocks: &mut ClockTree) -> Option<TimgWdtClockConfig> {
                clocks.timg_wdt_clock[self as usize]
            }
            pub fn request_wdt_clock(self, clocks: &mut ClockTree) {
                trace!("Requesting {:?}::WDT_CLOCK", self);
                if increment_reference_count(&mut clocks.timg_wdt_clock_refcount[self as usize]) {
                    trace!("Enabling {:?}::WDT_CLOCK", self);
                    match unwrap!(clocks.timg_wdt_clock[self as usize]) {
                        TimgWdtClockConfig::XtalClk => request_xtal_clk(clocks),
                        TimgWdtClockConfig::RcFastClk => request_rc_fast_clk(clocks),
                        TimgWdtClockConfig::PllF80m => request_pll_f80m(clocks),
                    }
                    self.enable_wdt_clock_impl(clocks, true);
                }
            }
            pub fn release_wdt_clock(self, clocks: &mut ClockTree) {
                trace!("Releasing {:?}::WDT_CLOCK", self);
                if decrement_reference_count(&mut clocks.timg_wdt_clock_refcount[self as usize]) {
                    trace!("Disabling {:?}::WDT_CLOCK", self);
                    self.enable_wdt_clock_impl(clocks, false);
                    match unwrap!(clocks.timg_wdt_clock[self as usize]) {
                        TimgWdtClockConfig::XtalClk => release_xtal_clk(clocks),
                        TimgWdtClockConfig::RcFastClk => release_rc_fast_clk(clocks),
                        TimgWdtClockConfig::PllF80m => release_pll_f80m(clocks),
                    }
                }
            }
            #[allow(unused_variables)]
            pub fn wdt_clock_config_frequency(
                self,
                clocks: &mut ClockTree,
                config: TimgWdtClockConfig,
            ) -> u32 {
                match config {
                    TimgWdtClockConfig::XtalClk => xtal_clk_frequency(clocks),
                    TimgWdtClockConfig::RcFastClk => rc_fast_clk_frequency(clocks),
                    TimgWdtClockConfig::PllF80m => pll_f80m_frequency(clocks),
                }
            }
            pub fn wdt_clock_frequency(self, clocks: &mut ClockTree) -> u32 {
                if let Some(config) = clocks.timg_wdt_clock[self as usize] {
                    self.wdt_clock_config_frequency(clocks, config)
                } else {
                    0
                }
            }
        }
        impl UartInstance {
            pub fn configure_function_clock(
                self,
                clocks: &mut ClockTree,
                config: UartFunctionClockConfig,
            ) {
                let old_config = clocks.uart_function_clock[self as usize].replace(config);
                if clocks.uart_function_clock_refcount[self as usize] > 0 {
                    match config.sclk {
                        UartFunctionClockSclk::Xtal => request_xtal_clk(clocks),
                        UartFunctionClockSclk::PllF80m => request_pll_f80m(clocks),
                        UartFunctionClockSclk::RcFast => request_rc_fast_clk(clocks),
                    }
                    self.configure_function_clock_impl(clocks, old_config, config);
                    if let Some(old_config) = old_config {
                        match old_config.sclk {
                            UartFunctionClockSclk::Xtal => release_xtal_clk(clocks),
                            UartFunctionClockSclk::PllF80m => release_pll_f80m(clocks),
                            UartFunctionClockSclk::RcFast => release_rc_fast_clk(clocks),
                        }
                    }
                } else {
                    self.configure_function_clock_impl(clocks, old_config, config);
                }
            }
            pub fn function_clock_config(
                self,
                clocks: &mut ClockTree,
            ) -> Option<UartFunctionClockConfig> {
                clocks.uart_function_clock[self as usize]
            }
            pub fn request_function_clock(self, clocks: &mut ClockTree) {
                trace!("Requesting {:?}::FUNCTION_CLOCK", self);
                if increment_reference_count(
                    &mut clocks.uart_function_clock_refcount[self as usize],
                ) {
                    trace!("Enabling {:?}::FUNCTION_CLOCK", self);
                    match unwrap!(clocks.uart_function_clock[self as usize]).sclk {
                        UartFunctionClockSclk::Xtal => request_xtal_clk(clocks),
                        UartFunctionClockSclk::PllF80m => request_pll_f80m(clocks),
                        UartFunctionClockSclk::RcFast => request_rc_fast_clk(clocks),
                    }
                    self.enable_function_clock_impl(clocks, true);
                }
            }
            pub fn release_function_clock(self, clocks: &mut ClockTree) {
                trace!("Releasing {:?}::FUNCTION_CLOCK", self);
                if decrement_reference_count(
                    &mut clocks.uart_function_clock_refcount[self as usize],
                ) {
                    trace!("Disabling {:?}::FUNCTION_CLOCK", self);
                    self.enable_function_clock_impl(clocks, false);
                    match unwrap!(clocks.uart_function_clock[self as usize]).sclk {
                        UartFunctionClockSclk::Xtal => release_xtal_clk(clocks),
                        UartFunctionClockSclk::PllF80m => release_pll_f80m(clocks),
                        UartFunctionClockSclk::RcFast => release_rc_fast_clk(clocks),
                    }
                }
            }
            #[allow(unused_variables)]
            pub fn function_clock_config_frequency(
                self,
                clocks: &mut ClockTree,
                config: UartFunctionClockConfig,
            ) -> u32 {
                (match config.sclk {
                    UartFunctionClockSclk::Xtal => xtal_clk_frequency(clocks),
                    UartFunctionClockSclk::PllF80m => pll_f80m_frequency(clocks),
                    UartFunctionClockSclk::RcFast => rc_fast_clk_frequency(clocks),
                } / (config.div_num() + 1))
            }
            pub fn function_clock_frequency(self, clocks: &mut ClockTree) -> u32 {
                if let Some(config) = clocks.uart_function_clock[self as usize] {
                    self.function_clock_config_frequency(clocks, config)
                } else {
                    0
                }
            }
            pub fn configure_baud_rate_generator(
                self,
                clocks: &mut ClockTree,
                config: UartBaudRateGeneratorConfig,
            ) {
                let old_config = clocks.uart_baud_rate_generator[self as usize].replace(config);
                self.configure_baud_rate_generator_impl(clocks, old_config, config);
            }
            pub fn baud_rate_generator_config(
                self,
                clocks: &mut ClockTree,
            ) -> Option<UartBaudRateGeneratorConfig> {
                clocks.uart_baud_rate_generator[self as usize]
            }
            pub fn request_baud_rate_generator(self, clocks: &mut ClockTree) {
                trace!("Requesting {:?}::BAUD_RATE_GENERATOR", self);
                if increment_reference_count(
                    &mut clocks.uart_baud_rate_generator_refcount[self as usize],
                ) {
                    trace!("Enabling {:?}::BAUD_RATE_GENERATOR", self);
                    self.request_function_clock(clocks);
                    self.enable_baud_rate_generator_impl(clocks, true);
                }
            }
            pub fn release_baud_rate_generator(self, clocks: &mut ClockTree) {
                trace!("Releasing {:?}::BAUD_RATE_GENERATOR", self);
                if decrement_reference_count(
                    &mut clocks.uart_baud_rate_generator_refcount[self as usize],
                ) {
                    trace!("Disabling {:?}::BAUD_RATE_GENERATOR", self);
                    self.enable_baud_rate_generator_impl(clocks, false);
                    self.release_function_clock(clocks);
                }
            }
            #[allow(unused_variables)]
            pub fn baud_rate_generator_config_frequency(
                self,
                clocks: &mut ClockTree,
                config: UartBaudRateGeneratorConfig,
            ) -> u32 {
                ((self.function_clock_frequency(clocks) * 16)
                    / ((config.integral() * 16) + config.fractional()))
            }
            pub fn baud_rate_generator_frequency(self, clocks: &mut ClockTree) -> u32 {
                if let Some(config) = clocks.uart_baud_rate_generator[self as usize] {
                    self.baud_rate_generator_config_frequency(clocks, config)
                } else {
                    0
                }
            }
        }
        /// Clock tree configuration.
        ///
        /// The fields of this struct are optional, with the following caveats:
        /// - If `XTAL_CLK` is not specified, the crystal frequency will be automatically detected
        ///   if possible.
        /// - The CPU and its upstream clock nodes will be set to a default configuration.
        /// - Other unspecified clock sources will not be useable by peripherals.
        #[derive(Debug, Clone, Copy, PartialEq, Eq)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        #[instability::unstable]
        pub struct ClockConfig {
            /// `XTAL_CLK` configuration.
            pub xtal_clk: Option<XtalClkConfig>,
            /// `HP_ROOT_CLK` configuration.
            pub hp_root_clk: Option<HpRootClkConfig>,
            /// `CPU_CLK` configuration.
            pub cpu_clk: Option<CpuClkConfig>,
            /// `AHB_CLK` configuration.
            pub ahb_clk: Option<AhbClkConfig>,
            /// `APB_CLK` configuration.
            pub apb_clk: Option<ApbClkConfig>,
            /// `LP_FAST_CLK` configuration.
            pub lp_fast_clk: Option<LpFastClkConfig>,
            /// `LP_SLOW_CLK` configuration.
            pub lp_slow_clk: Option<LpSlowClkConfig>,
            /// `TIMG_CALIBRATION_CLOCK` configuration.
            pub timg_calibration_clock: Option<TimgCalibrationClockConfig>,
        }
        impl ClockConfig {
            fn apply(&self) {
                ClockTree::with(|clocks| {
                    if let Some(config) = self.xtal_clk {
                        configure_xtal_clk(clocks, config);
                    }
                    if let Some(config) = self.hp_root_clk {
                        configure_hp_root_clk(clocks, config);
                    }
                    if let Some(config) = self.cpu_clk {
                        configure_cpu_clk(clocks, config);
                    }
                    if let Some(config) = self.ahb_clk {
                        configure_ahb_clk(clocks, config);
                    }
                    if let Some(config) = self.apb_clk {
                        configure_apb_clk(clocks, config);
                    }
                    if let Some(config) = self.lp_fast_clk {
                        configure_lp_fast_clk(clocks, config);
                    }
                    if let Some(config) = self.lp_slow_clk {
                        configure_lp_slow_clk(clocks, config);
                    }
                    if let Some(config) = self.timg_calibration_clock {
                        configure_timg_calibration_clock(clocks, config);
                    }
                });
            }
        }
        fn increment_reference_count(refcount: &mut u32) -> bool {
            let first = *refcount == 0;
            *refcount = unwrap!(refcount.checked_add(1), "Reference count overflow");
            first
        }
        fn decrement_reference_count(refcount: &mut u32) -> bool {
            *refcount = refcount.saturating_sub(1);
            let last = *refcount == 0;
            last
        }
    };
}
/// Implement the `Peripheral` enum and enable/disable/reset functions.
///
/// This macro is intended to be placed in `esp_hal::system`.
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! implement_peripheral_clocks {
    () => {
        #[doc(hidden)]
        #[derive(Debug, Clone, Copy, PartialEq, Eq)]
        #[repr(u8)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        pub enum Peripheral {
            /// DMA peripheral clock signal
            Dma,
            /// ECC peripheral clock signal
            Ecc,
            /// I2C_EXT0 peripheral clock signal
            I2cExt0,
            /// SHA peripheral clock signal
            Sha,
            /// SPI2 peripheral clock signal
            Spi2,
            /// SYSTIMER peripheral clock signal
            Systimer,
            /// TIMG0 peripheral clock signal
            Timg0,
            /// TIMG1 peripheral clock signal
            Timg1,
            /// UART0 peripheral clock signal
            Uart0,
            /// UART1 peripheral clock signal
            Uart1,
        }
        impl Peripheral {
            const KEEP_ENABLED: &[Peripheral] = &[Self::Systimer, Self::Timg0, Self::Uart0];
            const COUNT: usize = Self::ALL.len();
            const ALL: &[Self] = &[
                Self::Dma,
                Self::Ecc,
                Self::I2cExt0,
                Self::Sha,
                Self::Spi2,
                Self::Systimer,
                Self::Timg0,
                Self::Timg1,
                Self::Uart0,
                Self::Uart1,
            ];
        }
        unsafe fn enable_internal_racey(peripheral: Peripheral, enable: bool) {
            match peripheral {
                Peripheral::Dma => {
                    crate::peripherals::SYSTEM::regs()
                        .gdma_conf()
                        .modify(|_, w| w.gdma_clk_en().bit(enable));
                }
                Peripheral::Ecc => {
                    crate::peripherals::SYSTEM::regs()
                        .ecc_conf()
                        .modify(|_, w| w.ecc_clk_en().bit(enable));
                }
                Peripheral::I2cExt0 => {
                    crate::peripherals::SYSTEM::regs()
                        .i2c0_conf()
                        .modify(|_, w| w.i2c0_clk_en().bit(enable));
                }
                Peripheral::Sha => {
                    crate::peripherals::SYSTEM::regs()
                        .sha_conf()
                        .modify(|_, w| w.sha_clk_en().bit(enable));
                }
                Peripheral::Spi2 => {
                    crate::peripherals::SYSTEM::regs()
                        .spi2_conf()
                        .modify(|_, w| w.spi2_clk_en().bit(enable));
                }
                Peripheral::Systimer => {
                    crate::peripherals::SYSTEM::regs()
                        .systimer_conf()
                        .modify(|_, w| w.systimer_clk_en().bit(enable));
                }
                Peripheral::Timg0 => {
                    crate::peripherals::SYSTEM::regs()
                        .timergroup(0)
                        .conf()
                        .modify(|_, w| w.clk_en().bit(enable));
                }
                Peripheral::Timg1 => {
                    crate::peripherals::SYSTEM::regs()
                        .timergroup(1)
                        .conf()
                        .modify(|_, w| w.clk_en().bit(enable));
                }
                Peripheral::Uart0 => {
                    crate::peripherals::SYSTEM::regs()
                        .uart(0)
                        .conf()
                        .modify(|_, w| w.clk_en().bit(enable));
                }
                Peripheral::Uart1 => {
                    crate::peripherals::SYSTEM::regs()
                        .uart(1)
                        .conf()
                        .modify(|_, w| w.clk_en().bit(enable));
                }
            }
        }
        unsafe fn assert_peri_reset_racey(peripheral: Peripheral, reset: bool) {
            match peripheral {
                Peripheral::Dma => {
                    crate::peripherals::SYSTEM::regs()
                        .gdma_conf()
                        .modify(|_, w| w.gdma_rst_en().bit(reset));
                }
                Peripheral::Ecc => {
                    crate::peripherals::SYSTEM::regs()
                        .ecc_conf()
                        .modify(|_, w| w.ecc_rst_en().bit(reset));
                }
                Peripheral::I2cExt0 => {
                    crate::peripherals::SYSTEM::regs()
                        .i2c0_conf()
                        .modify(|_, w| w.i2c0_rst_en().bit(reset));
                }
                Peripheral::Sha => {
                    crate::peripherals::SYSTEM::regs()
                        .sha_conf()
                        .modify(|_, w| w.sha_rst_en().bit(reset));
                }
                Peripheral::Spi2 => {
                    crate::peripherals::SYSTEM::regs()
                        .spi2_conf()
                        .modify(|_, w| w.spi2_rst_en().bit(reset));
                }
                Peripheral::Systimer => {
                    crate::peripherals::SYSTEM::regs()
                        .systimer_conf()
                        .modify(|_, w| w.systimer_rst_en().bit(reset));
                }
                Peripheral::Timg0 => {
                    crate::peripherals::SYSTEM::regs()
                        .timergroup(0)
                        .conf()
                        .modify(|_, w| w.rst_en().bit(reset));
                }
                Peripheral::Timg1 => {
                    crate::peripherals::SYSTEM::regs()
                        .timergroup(1)
                        .conf()
                        .modify(|_, w| w.rst_en().bit(reset));
                }
                Peripheral::Uart0 => {
                    crate::peripherals::SYSTEM::regs()
                        .uart(0)
                        .conf()
                        .modify(|_, w| w.rst_en().bit(reset));
                }
                Peripheral::Uart1 => {
                    crate::peripherals::SYSTEM::regs()
                        .uart(1)
                        .conf()
                        .modify(|_, w| w.rst_en().bit(reset));
                }
            }
        }
    };
}
/// Macro to get the address range of the given memory region.
///
/// This macro provides two syntax options for each memory region:
///
/// - `memory_range!("region_name")` returns the address range as a range expression (`start..end`).
/// - `memory_range!(size as str, "region_name")` returns the size of the region as a string
///   literal.
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! memory_range {
    ("DRAM") => {
        0x40800000..0x40850000
    };
    (size as str, "DRAM") => {
        "327680"
    };
    ("DRAM2_UNINIT") => {
        0x4083EA70..0x4084EA70
    };
    (size as str, "DRAM2_UNINIT") => {
        "65536"
    };
}
/// This macro can be used to generate code for each peripheral instance of the I2C master driver.
///
/// For an explanation on the general syntax, as well as usage of individual/repeated
/// matchers, refer to [the crate-level documentation][crate#for_each-macros].
///
/// This macro has one option for its "Individual matcher" case:
///
/// Syntax: `($id:literal, $instance:ident, $sys:ident, $scl:ident, $sda:ident)`
///
/// Macro fragments:
/// - `$id`: the index of the I2C instance
/// - `$instance`: the name of the I2C instance
/// - `$sys`: the name of the instance as it is in the `esp_hal::system::Peripheral` enum.
/// - `$scl`, `$sda`: peripheral signal names.
///
/// Example data: `(0, I2C0, I2cExt0, I2CEXT0_SCL, I2CEXT0_SDA)`
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_i2c_master {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_i2c_master { $(($pattern) => $code;)* ($other : tt)
        => {} } _for_each_inner_i2c_master!((0, I2C0, I2cExt0, I2CEXT0_SCL,
        I2CEXT0_SDA)); _for_each_inner_i2c_master!((all(0, I2C0, I2cExt0, I2CEXT0_SCL,
        I2CEXT0_SDA)));
    };
}
/// This macro can be used to generate code for each peripheral instance of the UART driver.
///
/// For an explanation on the general syntax, as well as usage of individual/repeated
/// matchers, refer to [the crate-level documentation][crate#for_each-macros].
///
/// This macro has one option for its "Individual matcher" case:
///
/// Syntax: `($id:literal, $instance:ident, $sys:ident, $rx:ident, $tx:ident, $cts:ident,
/// $rts:ident)`
///
/// Macro fragments:
///
/// - `$id`: the index of the UART instance
/// - `$instance`: the name of the UART instance
/// - `$sys`: the name of the instance as it is in the `esp_hal::system::Peripheral` enum.
/// - `$rx`, `$tx`, `$cts`, `$rts`: signal names.
///
/// Example data: `(0, UART0, Uart0, U0RXD, U0TXD, U0CTS, U0RTS)`
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_uart {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_uart { $(($pattern) => $code;)* ($other : tt) => {}
        } _for_each_inner_uart!((0, UART0, Uart0, U0RXD, U0TXD, U0CTS, U0RTS));
        _for_each_inner_uart!((1, UART1, Uart1, U1RXD, U1TXD, U1CTS, U1RTS));
        _for_each_inner_uart!((all(0, UART0, Uart0, U0RXD, U0TXD, U0CTS, U0RTS), (1,
        UART1, Uart1, U1RXD, U1TXD, U1CTS, U1RTS)));
    };
}
/// This macro can be used to generate code for each peripheral instance of the SPI master driver.
///
/// For an explanation on the general syntax, as well as usage of individual/repeated
/// matchers, refer to [the crate-level documentation][crate#for_each-macros].
///
/// This macro has one option for its "Individual matcher" case:
///
/// Syntax: `($instance:ident, $sys:ident, $sclk:ident [$($cs:ident),*] [$($sio:ident),*]
/// $($is_qspi:literal)?)`
///
/// Macro fragments:
///
/// - `$instance`: the name of the SPI instance
/// - `$sys`: the name of the instance as it is in the `esp_hal::system::Peripheral` enum.
/// - `$cs`, `$sio`: chip select and SIO signal names.
/// - `$is_qspi`: a `true` literal present if the SPI instance supports QSPI.
///
/// Example data:
/// - `(SPI2, Spi2, FSPICLK [FSPICS0, FSPICS1, FSPICS2, FSPICS3, FSPICS4, FSPICS5] [FSPID, FSPIQ,
///   FSPIWP, FSPIHD, FSPIIO4, FSPIIO5, FSPIIO6, FSPIIO7], true)`
/// - `(SPI3, Spi3, SPI3_CLK [SPI3_CS0, SPI3_CS1, SPI3_CS2] [SPI3_D, SPI3_Q])`
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_spi_master {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_spi_master { $(($pattern) => $code;)* ($other : tt)
        => {} } _for_each_inner_spi_master!((SPI2, Spi2, FSPICLK[FSPICS0, FSPICS1,
        FSPICS2, FSPICS3, FSPICS4, FSPICS5] [FSPID, FSPIQ, FSPIWP, FSPIHD], true));
        _for_each_inner_spi_master!((all(SPI2, Spi2, FSPICLK[FSPICS0, FSPICS1, FSPICS2,
        FSPICS3, FSPICS4, FSPICS5] [FSPID, FSPIQ, FSPIWP, FSPIHD], true)));
    };
}
/// This macro can be used to generate code for each peripheral instance of the SPI slave driver.
///
/// For an explanation on the general syntax, as well as usage of individual/repeated
/// matchers, refer to [the crate-level documentation][crate#for_each-macros].
///
/// This macro has one option for its "Individual matcher" case:
///
/// Syntax: `($instance:ident, $sys:ident, $sclk:ident, $mosi:ident, $miso:ident, $cs:ident)`
///
/// Macro fragments:
///
/// - `$instance`: the name of the SPI instance
/// - `$sys`: the name of the instance as it is in the `esp_hal::system::Peripheral` enum.
/// - `$sclk`, `$mosi`, `$miso`, `$cs`: signal names.
///
/// Example data: `(SPI2, Spi2, FSPICLK, FSPID, FSPIQ, FSPICS0)`
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_spi_slave {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_spi_slave { $(($pattern) => $code;)* ($other : tt)
        => {} } _for_each_inner_spi_slave!((SPI2, Spi2, FSPICLK, FSPID, FSPIQ, FSPICS0));
        _for_each_inner_spi_slave!((all(SPI2, Spi2, FSPICLK, FSPID, FSPIQ, FSPICS0)));
    };
}
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_peripheral {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_peripheral { $(($pattern) => $code;)* ($other : tt)
        => {} } _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO0 peripheral singleton"] GPIO0 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc = "GPIO1 peripheral singleton"]
        GPIO1 <= virtual())); _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO2 peripheral singleton"] GPIO2 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO3 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        =
        "<li>These pins may be used to debug the chip using an external JTAG debugger.</li>"]
        #[doc = "</ul>"] #[doc = "</section>"] GPIO3 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO4 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        =
        "<li>These pins may be used to debug the chip using an external JTAG debugger.</li>"]
        #[doc = "</ul>"] #[doc = "</section>"] GPIO4 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO5 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>These pins may be used to debug the chip using an external JTAG debugger.</li>"]
        #[doc = "</ul>"] #[doc = "</section>"] GPIO5 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO6 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>These pins may be used to debug the chip using an external JTAG debugger.</li>"]
        #[doc = "</ul>"] #[doc = "</section>"] GPIO6 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO7 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO7 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO8 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO8 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO9 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO9 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO10 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>By default, this pin is used by the UART programming interface.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO10 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO11 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>By default, this pin is used by the UART programming interface.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO11 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO12 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>These pins may be used to debug the chip using USB.</li>"] #[doc = "</ul>"]
        #[doc = "</section>"] GPIO12 <= virtual())); _for_each_inner_peripheral!((@
        peri_type #[doc = "GPIO13 peripheral singleton (Limitations exist)"] #[doc = ""]
        #[doc = "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>These pins may be used to debug the chip using USB.</li>"] #[doc = "</ul>"]
        #[doc = "</section>"] GPIO13 <= virtual())); _for_each_inner_peripheral!((@
        peri_type #[doc = "GPIO14 peripheral singleton (Limitations exist)"] #[doc = ""]
        #[doc = "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO14 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO15 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO15 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO16 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO16 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO17 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO17 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO18 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO18 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO19 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO19 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO20 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO20 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO21 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO21 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc = "GPIO22 peripheral singleton"]
        GPIO22 <= virtual())); _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO23 peripheral singleton"] GPIO23 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc = "GPIO24 peripheral singleton"]
        GPIO24 <= virtual())); _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO25 peripheral singleton"] GPIO25 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc = "GPIO26 peripheral singleton"]
        GPIO26 <= virtual())); _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO27 peripheral singleton"] GPIO27 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc = "GPIO28 peripheral singleton"]
        GPIO28 <= virtual())); _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO29 peripheral singleton"] GPIO29 <= virtual()));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "ASSIST_DEBUG peripheral singleton"] ASSIST_DEBUG <= ASSIST_DEBUG() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "CLINT peripheral singleton"]
        CLINT <= CLINT() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "CACHE peripheral singleton"] CACHE <= CACHE() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "DMA peripheral singleton"] DMA
        <= DMA() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "ECC peripheral singleton"] ECC <= ECC() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "ECDSA peripheral singleton"]
        ECDSA <= ECDSA() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "EFUSE peripheral singleton"] EFUSE <= EFUSE() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "ETM peripheral singleton"] ETM
        <= SOC_ETM() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "GPIO peripheral singleton"] GPIO <= GPIO() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "HP_APM peripheral singleton"]
        HP_APM <= HP_APM() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "HP_SYS peripheral singleton"] HP_SYS <= HP_SYS() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "I2C_ANA_MST peripheral singleton"] I2C_ANA_MST <= I2C_ANA_MST() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "I2C0 peripheral singleton"]
        I2C0 <= I2C0(I2C_EXT0 : { bind_peri_interrupt, enable_peri_interrupt,
        disable_peri_interrupt }))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "I2S0 peripheral singleton"] I2S0 <= I2S0(I2S0 : { bind_peri_interrupt,
        enable_peri_interrupt, disable_peri_interrupt }) (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "INTERRUPT_CORE0 peripheral singleton"] INTERRUPT_CORE0 <= INTERRUPT_CORE0()
        (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "INTPRI peripheral singleton"] INTPRI <= INTPRI() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "IO_MUX peripheral singleton"]
        IO_MUX <= IO_MUX() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "LP_ANA peripheral singleton"] LP_ANA <= LP_ANA() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "LP_AON peripheral singleton"]
        LP_AON <= LP_AON() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "LP_APM peripheral singleton"] LP_APM <= LP_APM() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "LP_CLKRST peripheral singleton"] LP_CLKRST <= LP_CLKRST() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "LPWR peripheral singleton"]
        LPWR <= LP_CLKRST() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc
        = "LP_IO_MUX peripheral singleton"] LP_IO_MUX <= LP_IO_MUX() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "LP_PERI peripheral singleton"]
        LP_PERI <= LPPERI() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc
        = "LP_TEE peripheral singleton"] LP_TEE <= LP_TEE() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "LP_TIMER peripheral singleton"]
        LP_TIMER <= LP_TIMER() (unstable))); _for_each_inner_peripheral!((@ peri_type
        #[doc = "LP_WDT peripheral singleton"] LP_WDT <= LP_WDT() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "MEM_MONITOR peripheral singleton"] MEM_MONITOR <= MEM_MONITOR() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "MODEM_LPCON peripheral singleton"] MODEM_LPCON <= MODEM_LPCON() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "MODEM_SYSCON peripheral singleton"] MODEM_SYSCON <= MODEM_SYSCON() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "PAU peripheral singleton"] PAU
        <= PAU() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "PCR peripheral singleton"] PCR <= PCR() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "PMU peripheral singleton"] PMU
        <= PMU() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "RNG peripheral singleton"] RNG <= RNG() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "SHA peripheral singleton"] SHA
        <= SHA(SHA : { bind_peri_interrupt, enable_peri_interrupt, disable_peri_interrupt
        }) (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "SLC peripheral singleton"] SLC <= SLC() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "SPI0 peripheral singleton"]
        SPI0 <= SPI0() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "SPI1 peripheral singleton"] SPI1 <= SPI1() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "SPI2 peripheral singleton"]
        SPI2 <= SPI2(SPI2 : { bind_peri_interrupt, enable_peri_interrupt,
        disable_peri_interrupt }))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "SYSTEM peripheral singleton"] SYSTEM <= PCR() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "SYSTIMER peripheral singleton"]
        SYSTIMER <= SYSTIMER() (unstable))); _for_each_inner_peripheral!((@ peri_type
        #[doc = "TEE peripheral singleton"] TEE <= TEE() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "TIMG0 peripheral singleton"]
        TIMG0 <= TIMG0() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "TIMG1 peripheral singleton"] TIMG1 <= TIMG1() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "UART0 peripheral singleton"]
        UART0 <= UART0(UART0 : { bind_peri_interrupt, enable_peri_interrupt,
        disable_peri_interrupt }))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "UART1 peripheral singleton"] UART1 <= UART1(UART1 : { bind_peri_interrupt,
        enable_peri_interrupt, disable_peri_interrupt })));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "USB_DEVICE peripheral singleton"] USB_DEVICE <= USB_DEVICE(USB_DEVICE : {
        bind_peri_interrupt, enable_peri_interrupt, disable_peri_interrupt })
        (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "DMA_CH0 peripheral singleton"] DMA_CH0 <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "DMA_CH1 peripheral singleton"]
        DMA_CH1 <= virtual() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc
        = "BT peripheral singleton"] BT <= virtual(LP_TIMER : { bind_lp_timer_interrupt,
        enable_lp_timer_interrupt, disable_lp_timer_interrupt }, BT_MAC : {
        bind_mac_interrupt, enable_mac_interrupt, disable_mac_interrupt }) (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "FLASH peripheral singleton"]
        FLASH <= virtual() (unstable))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "LP_CORE peripheral singleton"] LP_CORE <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "SW_INTERRUPT peripheral singleton"] SW_INTERRUPT <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "WIFI peripheral singleton"]
        WIFI <= virtual(WIFI_BB : { bind_bb_interrupt, enable_bb_interrupt,
        disable_bb_interrupt }, WIFI_MAC : { bind_mac_interrupt, enable_mac_interrupt,
        disable_mac_interrupt }, WIFI_PWR : { bind_pwr_interrupt, enable_pwr_interrupt,
        disable_pwr_interrupt }))); _for_each_inner_peripheral!((@ peri_type #[doc =
        "MEM2MEM0 peripheral singleton"] MEM2MEM0 <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "MEM2MEM1 peripheral singleton"]
        MEM2MEM1 <= virtual() (unstable))); _for_each_inner_peripheral!((@ peri_type
        #[doc = "MEM2MEM2 peripheral singleton"] MEM2MEM2 <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "MEM2MEM3 peripheral singleton"]
        MEM2MEM3 <= virtual() (unstable))); _for_each_inner_peripheral!((@ peri_type
        #[doc = "MEM2MEM4 peripheral singleton"] MEM2MEM4 <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "MEM2MEM5 peripheral singleton"]
        MEM2MEM5 <= virtual() (unstable))); _for_each_inner_peripheral!((@ peri_type
        #[doc = "MEM2MEM6 peripheral singleton"] MEM2MEM6 <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "MEM2MEM7 peripheral singleton"]
        MEM2MEM7 <= virtual() (unstable))); _for_each_inner_peripheral!((@ peri_type
        #[doc = "MEM2MEM8 peripheral singleton"] MEM2MEM8 <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "MEM2MEM9 peripheral singleton"]
        MEM2MEM9 <= virtual() (unstable))); _for_each_inner_peripheral!((@ peri_type
        #[doc = "MEM2MEM10 peripheral singleton"] MEM2MEM10 <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc =
        "MEM2MEM11 peripheral singleton"] MEM2MEM11 <= virtual() (unstable)));
        _for_each_inner_peripheral!((@ peri_type #[doc = "PSRAM peripheral singleton"]
        PSRAM <= virtual() (unstable))); _for_each_inner_peripheral!((GPIO0));
        _for_each_inner_peripheral!((GPIO1)); _for_each_inner_peripheral!((GPIO2));
        _for_each_inner_peripheral!((GPIO3)); _for_each_inner_peripheral!((GPIO4));
        _for_each_inner_peripheral!((GPIO5)); _for_each_inner_peripheral!((GPIO6));
        _for_each_inner_peripheral!((GPIO7)); _for_each_inner_peripheral!((GPIO8));
        _for_each_inner_peripheral!((GPIO9)); _for_each_inner_peripheral!((GPIO10));
        _for_each_inner_peripheral!((GPIO11)); _for_each_inner_peripheral!((GPIO12));
        _for_each_inner_peripheral!((GPIO13)); _for_each_inner_peripheral!((GPIO14));
        _for_each_inner_peripheral!((GPIO15)); _for_each_inner_peripheral!((GPIO16));
        _for_each_inner_peripheral!((GPIO17)); _for_each_inner_peripheral!((GPIO18));
        _for_each_inner_peripheral!((GPIO19)); _for_each_inner_peripheral!((GPIO20));
        _for_each_inner_peripheral!((GPIO21)); _for_each_inner_peripheral!((GPIO22));
        _for_each_inner_peripheral!((GPIO23)); _for_each_inner_peripheral!((GPIO24));
        _for_each_inner_peripheral!((GPIO25)); _for_each_inner_peripheral!((GPIO26));
        _for_each_inner_peripheral!((GPIO27)); _for_each_inner_peripheral!((GPIO28));
        _for_each_inner_peripheral!((GPIO29));
        _for_each_inner_peripheral!((ASSIST_DEBUG(unstable)));
        _for_each_inner_peripheral!((CLINT(unstable)));
        _for_each_inner_peripheral!((CACHE(unstable)));
        _for_each_inner_peripheral!((DMA(unstable)));
        _for_each_inner_peripheral!((ECC(unstable)));
        _for_each_inner_peripheral!((ECDSA(unstable)));
        _for_each_inner_peripheral!((EFUSE(unstable)));
        _for_each_inner_peripheral!((ETM(unstable)));
        _for_each_inner_peripheral!((GPIO(unstable)));
        _for_each_inner_peripheral!((HP_APM(unstable)));
        _for_each_inner_peripheral!((HP_SYS(unstable)));
        _for_each_inner_peripheral!((I2C_ANA_MST(unstable)));
        _for_each_inner_peripheral!((I2C0));
        _for_each_inner_peripheral!((I2S0(unstable)));
        _for_each_inner_peripheral!((INTERRUPT_CORE0(unstable)));
        _for_each_inner_peripheral!((INTPRI(unstable)));
        _for_each_inner_peripheral!((IO_MUX(unstable)));
        _for_each_inner_peripheral!((LP_ANA(unstable)));
        _for_each_inner_peripheral!((LP_AON(unstable)));
        _for_each_inner_peripheral!((LP_APM(unstable)));
        _for_each_inner_peripheral!((LP_CLKRST(unstable)));
        _for_each_inner_peripheral!((LPWR(unstable)));
        _for_each_inner_peripheral!((LP_IO_MUX(unstable)));
        _for_each_inner_peripheral!((LP_PERI(unstable)));
        _for_each_inner_peripheral!((LP_TEE(unstable)));
        _for_each_inner_peripheral!((LP_TIMER(unstable)));
        _for_each_inner_peripheral!((LP_WDT(unstable)));
        _for_each_inner_peripheral!((MEM_MONITOR(unstable)));
        _for_each_inner_peripheral!((MODEM_LPCON(unstable)));
        _for_each_inner_peripheral!((MODEM_SYSCON(unstable)));
        _for_each_inner_peripheral!((PAU(unstable)));
        _for_each_inner_peripheral!((PCR(unstable)));
        _for_each_inner_peripheral!((PMU(unstable)));
        _for_each_inner_peripheral!((RNG(unstable)));
        _for_each_inner_peripheral!((SHA(unstable)));
        _for_each_inner_peripheral!((SLC(unstable)));
        _for_each_inner_peripheral!((SPI0(unstable)));
        _for_each_inner_peripheral!((SPI1(unstable)));
        _for_each_inner_peripheral!((SPI2));
        _for_each_inner_peripheral!((SYSTEM(unstable)));
        _for_each_inner_peripheral!((SYSTIMER(unstable)));
        _for_each_inner_peripheral!((TEE(unstable)));
        _for_each_inner_peripheral!((TIMG0(unstable)));
        _for_each_inner_peripheral!((TIMG1(unstable)));
        _for_each_inner_peripheral!((UART0)); _for_each_inner_peripheral!((UART1));
        _for_each_inner_peripheral!((USB_DEVICE(unstable)));
        _for_each_inner_peripheral!((DMA_CH0(unstable)));
        _for_each_inner_peripheral!((DMA_CH1(unstable)));
        _for_each_inner_peripheral!((BT(unstable)));
        _for_each_inner_peripheral!((FLASH(unstable)));
        _for_each_inner_peripheral!((LP_CORE(unstable)));
        _for_each_inner_peripheral!((SW_INTERRUPT(unstable)));
        _for_each_inner_peripheral!((WIFI));
        _for_each_inner_peripheral!((MEM2MEM0(unstable)));
        _for_each_inner_peripheral!((MEM2MEM1(unstable)));
        _for_each_inner_peripheral!((MEM2MEM2(unstable)));
        _for_each_inner_peripheral!((MEM2MEM3(unstable)));
        _for_each_inner_peripheral!((MEM2MEM4(unstable)));
        _for_each_inner_peripheral!((MEM2MEM5(unstable)));
        _for_each_inner_peripheral!((MEM2MEM6(unstable)));
        _for_each_inner_peripheral!((MEM2MEM7(unstable)));
        _for_each_inner_peripheral!((MEM2MEM8(unstable)));
        _for_each_inner_peripheral!((MEM2MEM9(unstable)));
        _for_each_inner_peripheral!((MEM2MEM10(unstable)));
        _for_each_inner_peripheral!((MEM2MEM11(unstable)));
        _for_each_inner_peripheral!((PSRAM(unstable)));
        _for_each_inner_peripheral!((MEM2MEM0, Mem2mem0, 0));
        _for_each_inner_peripheral!((SPI2, Spi2, 1));
        _for_each_inner_peripheral!((MEM2MEM1, Mem2mem1, 2));
        _for_each_inner_peripheral!((I2S0, I2s0, 3));
        _for_each_inner_peripheral!((MEM2MEM2, Mem2mem2, 4));
        _for_each_inner_peripheral!((MEM2MEM3, Mem2mem3, 5));
        _for_each_inner_peripheral!((MEM2MEM4, Mem2mem4, 6));
        _for_each_inner_peripheral!((SHA, Sha, 7));
        _for_each_inner_peripheral!((MEM2MEM5, Mem2mem5, 9));
        _for_each_inner_peripheral!((MEM2MEM6, Mem2mem6, 10));
        _for_each_inner_peripheral!((MEM2MEM7, Mem2mem7, 11));
        _for_each_inner_peripheral!((MEM2MEM8, Mem2mem8, 12));
        _for_each_inner_peripheral!((MEM2MEM9, Mem2mem9, 13));
        _for_each_inner_peripheral!((MEM2MEM10, Mem2mem10, 14));
        _for_each_inner_peripheral!((MEM2MEM11, Mem2mem11, 15));
        _for_each_inner_peripheral!((all(@ peri_type #[doc =
        "GPIO0 peripheral singleton"] GPIO0 <= virtual()), (@ peri_type #[doc =
        "GPIO1 peripheral singleton"] GPIO1 <= virtual()), (@ peri_type #[doc =
        "GPIO2 peripheral singleton"] GPIO2 <= virtual()), (@ peri_type #[doc =
        "GPIO3 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        =
        "<li>These pins may be used to debug the chip using an external JTAG debugger.</li>"]
        #[doc = "</ul>"] #[doc = "</section>"] GPIO3 <= virtual()), (@ peri_type #[doc =
        "GPIO4 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        =
        "<li>These pins may be used to debug the chip using an external JTAG debugger.</li>"]
        #[doc = "</ul>"] #[doc = "</section>"] GPIO4 <= virtual()), (@ peri_type #[doc =
        "GPIO5 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>These pins may be used to debug the chip using an external JTAG debugger.</li>"]
        #[doc = "</ul>"] #[doc = "</section>"] GPIO5 <= virtual()), (@ peri_type #[doc =
        "GPIO6 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>These pins may be used to debug the chip using an external JTAG debugger.</li>"]
        #[doc = "</ul>"] #[doc = "</section>"] GPIO6 <= virtual()), (@ peri_type #[doc =
        "GPIO7 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO7 <= virtual()), (@ peri_type #[doc =
        "GPIO8 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO8 <= virtual()), (@ peri_type #[doc =
        "GPIO9 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin is a strapping pin, it determines how the chip boots.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO9 <= virtual()), (@ peri_type #[doc =
        "GPIO10 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>By default, this pin is used by the UART programming interface.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO10 <= virtual()), (@ peri_type #[doc =
        "GPIO11 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>By default, this pin is used by the UART programming interface.</li>"] #[doc
        = "</ul>"] #[doc = "</section>"] GPIO11 <= virtual()), (@ peri_type #[doc =
        "GPIO12 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>These pins may be used to debug the chip using USB.</li>"] #[doc = "</ul>"]
        #[doc = "</section>"] GPIO12 <= virtual()), (@ peri_type #[doc =
        "GPIO13 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>These pins may be used to debug the chip using USB.</li>"] #[doc = "</ul>"]
        #[doc = "</section>"] GPIO13 <= virtual()), (@ peri_type #[doc =
        "GPIO14 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO14 <= virtual()), (@ peri_type #[doc =
        "GPIO15 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO15 <= virtual()), (@ peri_type #[doc =
        "GPIO16 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO16 <= virtual()), (@ peri_type #[doc =
        "GPIO17 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO17 <= virtual()), (@ peri_type #[doc =
        "GPIO18 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO18 <= virtual()), (@ peri_type #[doc =
        "GPIO19 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO19 <= virtual()), (@ peri_type #[doc =
        "GPIO20 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO20 <= virtual()), (@ peri_type #[doc =
        "GPIO21 peripheral singleton (Limitations exist)"] #[doc = ""] #[doc =
        "<section class=\"warning\">"] #[doc =
        "This pin may be available with certain limitations. Check your hardware to make sure whether you can use it."]
        #[doc = "<ul>"] #[doc =
        "<li>This pin may be reserved for interfacing with SPI flash.</li>"] #[doc =
        "</ul>"] #[doc = "</section>"] GPIO21 <= virtual()), (@ peri_type #[doc =
        "GPIO22 peripheral singleton"] GPIO22 <= virtual()), (@ peri_type #[doc =
        "GPIO23 peripheral singleton"] GPIO23 <= virtual()), (@ peri_type #[doc =
        "GPIO24 peripheral singleton"] GPIO24 <= virtual()), (@ peri_type #[doc =
        "GPIO25 peripheral singleton"] GPIO25 <= virtual()), (@ peri_type #[doc =
        "GPIO26 peripheral singleton"] GPIO26 <= virtual()), (@ peri_type #[doc =
        "GPIO27 peripheral singleton"] GPIO27 <= virtual()), (@ peri_type #[doc =
        "GPIO28 peripheral singleton"] GPIO28 <= virtual()), (@ peri_type #[doc =
        "GPIO29 peripheral singleton"] GPIO29 <= virtual()), (@ peri_type #[doc =
        "ASSIST_DEBUG peripheral singleton"] ASSIST_DEBUG <= ASSIST_DEBUG() (unstable)),
        (@ peri_type #[doc = "CLINT peripheral singleton"] CLINT <= CLINT() (unstable)),
        (@ peri_type #[doc = "CACHE peripheral singleton"] CACHE <= CACHE() (unstable)),
        (@ peri_type #[doc = "DMA peripheral singleton"] DMA <= DMA() (unstable)), (@
        peri_type #[doc = "ECC peripheral singleton"] ECC <= ECC() (unstable)), (@
        peri_type #[doc = "ECDSA peripheral singleton"] ECDSA <= ECDSA() (unstable)), (@
        peri_type #[doc = "EFUSE peripheral singleton"] EFUSE <= EFUSE() (unstable)), (@
        peri_type #[doc = "ETM peripheral singleton"] ETM <= SOC_ETM() (unstable)), (@
        peri_type #[doc = "GPIO peripheral singleton"] GPIO <= GPIO() (unstable)), (@
        peri_type #[doc = "HP_APM peripheral singleton"] HP_APM <= HP_APM() (unstable)),
        (@ peri_type #[doc = "HP_SYS peripheral singleton"] HP_SYS <= HP_SYS()
        (unstable)), (@ peri_type #[doc = "I2C_ANA_MST peripheral singleton"] I2C_ANA_MST
        <= I2C_ANA_MST() (unstable)), (@ peri_type #[doc = "I2C0 peripheral singleton"]
        I2C0 <= I2C0(I2C_EXT0 : { bind_peri_interrupt, enable_peri_interrupt,
        disable_peri_interrupt })), (@ peri_type #[doc = "I2S0 peripheral singleton"]
        I2S0 <= I2S0(I2S0 : { bind_peri_interrupt, enable_peri_interrupt,
        disable_peri_interrupt }) (unstable)), (@ peri_type #[doc =
        "INTERRUPT_CORE0 peripheral singleton"] INTERRUPT_CORE0 <= INTERRUPT_CORE0()
        (unstable)), (@ peri_type #[doc = "INTPRI peripheral singleton"] INTPRI <=
        INTPRI() (unstable)), (@ peri_type #[doc = "IO_MUX peripheral singleton"] IO_MUX
        <= IO_MUX() (unstable)), (@ peri_type #[doc = "LP_ANA peripheral singleton"]
        LP_ANA <= LP_ANA() (unstable)), (@ peri_type #[doc =
        "LP_AON peripheral singleton"] LP_AON <= LP_AON() (unstable)), (@ peri_type #[doc
        = "LP_APM peripheral singleton"] LP_APM <= LP_APM() (unstable)), (@ peri_type
        #[doc = "LP_CLKRST peripheral singleton"] LP_CLKRST <= LP_CLKRST() (unstable)),
        (@ peri_type #[doc = "LPWR peripheral singleton"] LPWR <= LP_CLKRST()
        (unstable)), (@ peri_type #[doc = "LP_IO_MUX peripheral singleton"] LP_IO_MUX <=
        LP_IO_MUX() (unstable)), (@ peri_type #[doc = "LP_PERI peripheral singleton"]
        LP_PERI <= LPPERI() (unstable)), (@ peri_type #[doc =
        "LP_TEE peripheral singleton"] LP_TEE <= LP_TEE() (unstable)), (@ peri_type #[doc
        = "LP_TIMER peripheral singleton"] LP_TIMER <= LP_TIMER() (unstable)), (@
        peri_type #[doc = "LP_WDT peripheral singleton"] LP_WDT <= LP_WDT() (unstable)),
        (@ peri_type #[doc = "MEM_MONITOR peripheral singleton"] MEM_MONITOR <=
        MEM_MONITOR() (unstable)), (@ peri_type #[doc =
        "MODEM_LPCON peripheral singleton"] MODEM_LPCON <= MODEM_LPCON() (unstable)), (@
        peri_type #[doc = "MODEM_SYSCON peripheral singleton"] MODEM_SYSCON <=
        MODEM_SYSCON() (unstable)), (@ peri_type #[doc = "PAU peripheral singleton"] PAU
        <= PAU() (unstable)), (@ peri_type #[doc = "PCR peripheral singleton"] PCR <=
        PCR() (unstable)), (@ peri_type #[doc = "PMU peripheral singleton"] PMU <= PMU()
        (unstable)), (@ peri_type #[doc = "RNG peripheral singleton"] RNG <= RNG()
        (unstable)), (@ peri_type #[doc = "SHA peripheral singleton"] SHA <= SHA(SHA : {
        bind_peri_interrupt, enable_peri_interrupt, disable_peri_interrupt })
        (unstable)), (@ peri_type #[doc = "SLC peripheral singleton"] SLC <= SLC()
        (unstable)), (@ peri_type #[doc = "SPI0 peripheral singleton"] SPI0 <= SPI0()
        (unstable)), (@ peri_type #[doc = "SPI1 peripheral singleton"] SPI1 <= SPI1()
        (unstable)), (@ peri_type #[doc = "SPI2 peripheral singleton"] SPI2 <= SPI2(SPI2
        : { bind_peri_interrupt, enable_peri_interrupt, disable_peri_interrupt })), (@
        peri_type #[doc = "SYSTEM peripheral singleton"] SYSTEM <= PCR() (unstable)), (@
        peri_type #[doc = "SYSTIMER peripheral singleton"] SYSTIMER <= SYSTIMER()
        (unstable)), (@ peri_type #[doc = "TEE peripheral singleton"] TEE <= TEE()
        (unstable)), (@ peri_type #[doc = "TIMG0 peripheral singleton"] TIMG0 <= TIMG0()
        (unstable)), (@ peri_type #[doc = "TIMG1 peripheral singleton"] TIMG1 <= TIMG1()
        (unstable)), (@ peri_type #[doc = "UART0 peripheral singleton"] UART0 <=
        UART0(UART0 : { bind_peri_interrupt, enable_peri_interrupt,
        disable_peri_interrupt })), (@ peri_type #[doc = "UART1 peripheral singleton"]
        UART1 <= UART1(UART1 : { bind_peri_interrupt, enable_peri_interrupt,
        disable_peri_interrupt })), (@ peri_type #[doc =
        "USB_DEVICE peripheral singleton"] USB_DEVICE <= USB_DEVICE(USB_DEVICE : {
        bind_peri_interrupt, enable_peri_interrupt, disable_peri_interrupt })
        (unstable)), (@ peri_type #[doc = "DMA_CH0 peripheral singleton"] DMA_CH0 <=
        virtual() (unstable)), (@ peri_type #[doc = "DMA_CH1 peripheral singleton"]
        DMA_CH1 <= virtual() (unstable)), (@ peri_type #[doc = "BT peripheral singleton"]
        BT <= virtual(LP_TIMER : { bind_lp_timer_interrupt, enable_lp_timer_interrupt,
        disable_lp_timer_interrupt }, BT_MAC : { bind_mac_interrupt,
        enable_mac_interrupt, disable_mac_interrupt }) (unstable)), (@ peri_type #[doc =
        "FLASH peripheral singleton"] FLASH <= virtual() (unstable)), (@ peri_type #[doc
        = "LP_CORE peripheral singleton"] LP_CORE <= virtual() (unstable)), (@ peri_type
        #[doc = "SW_INTERRUPT peripheral singleton"] SW_INTERRUPT <= virtual()
        (unstable)), (@ peri_type #[doc = "WIFI peripheral singleton"] WIFI <=
        virtual(WIFI_BB : { bind_bb_interrupt, enable_bb_interrupt, disable_bb_interrupt
        }, WIFI_MAC : { bind_mac_interrupt, enable_mac_interrupt, disable_mac_interrupt
        }, WIFI_PWR : { bind_pwr_interrupt, enable_pwr_interrupt, disable_pwr_interrupt
        })), (@ peri_type #[doc = "MEM2MEM0 peripheral singleton"] MEM2MEM0 <= virtual()
        (unstable)), (@ peri_type #[doc = "MEM2MEM1 peripheral singleton"] MEM2MEM1 <=
        virtual() (unstable)), (@ peri_type #[doc = "MEM2MEM2 peripheral singleton"]
        MEM2MEM2 <= virtual() (unstable)), (@ peri_type #[doc =
        "MEM2MEM3 peripheral singleton"] MEM2MEM3 <= virtual() (unstable)), (@ peri_type
        #[doc = "MEM2MEM4 peripheral singleton"] MEM2MEM4 <= virtual() (unstable)), (@
        peri_type #[doc = "MEM2MEM5 peripheral singleton"] MEM2MEM5 <= virtual()
        (unstable)), (@ peri_type #[doc = "MEM2MEM6 peripheral singleton"] MEM2MEM6 <=
        virtual() (unstable)), (@ peri_type #[doc = "MEM2MEM7 peripheral singleton"]
        MEM2MEM7 <= virtual() (unstable)), (@ peri_type #[doc =
        "MEM2MEM8 peripheral singleton"] MEM2MEM8 <= virtual() (unstable)), (@ peri_type
        #[doc = "MEM2MEM9 peripheral singleton"] MEM2MEM9 <= virtual() (unstable)), (@
        peri_type #[doc = "MEM2MEM10 peripheral singleton"] MEM2MEM10 <= virtual()
        (unstable)), (@ peri_type #[doc = "MEM2MEM11 peripheral singleton"] MEM2MEM11 <=
        virtual() (unstable)), (@ peri_type #[doc = "PSRAM peripheral singleton"] PSRAM
        <= virtual() (unstable)))); _for_each_inner_peripheral!((singletons(GPIO0),
        (GPIO1), (GPIO2), (GPIO3), (GPIO4), (GPIO5), (GPIO6), (GPIO7), (GPIO8), (GPIO9),
        (GPIO10), (GPIO11), (GPIO12), (GPIO13), (GPIO14), (GPIO15), (GPIO16), (GPIO17),
        (GPIO18), (GPIO19), (GPIO20), (GPIO21), (GPIO22), (GPIO23), (GPIO24), (GPIO25),
        (GPIO26), (GPIO27), (GPIO28), (GPIO29), (ASSIST_DEBUG(unstable)),
        (CLINT(unstable)), (CACHE(unstable)), (DMA(unstable)), (ECC(unstable)),
        (ECDSA(unstable)), (EFUSE(unstable)), (ETM(unstable)), (GPIO(unstable)),
        (HP_APM(unstable)), (HP_SYS(unstable)), (I2C_ANA_MST(unstable)), (I2C0),
        (I2S0(unstable)), (INTERRUPT_CORE0(unstable)), (INTPRI(unstable)),
        (IO_MUX(unstable)), (LP_ANA(unstable)), (LP_AON(unstable)), (LP_APM(unstable)),
        (LP_CLKRST(unstable)), (LPWR(unstable)), (LP_IO_MUX(unstable)),
        (LP_PERI(unstable)), (LP_TEE(unstable)), (LP_TIMER(unstable)),
        (LP_WDT(unstable)), (MEM_MONITOR(unstable)), (MODEM_LPCON(unstable)),
        (MODEM_SYSCON(unstable)), (PAU(unstable)), (PCR(unstable)), (PMU(unstable)),
        (RNG(unstable)), (SHA(unstable)), (SLC(unstable)), (SPI0(unstable)),
        (SPI1(unstable)), (SPI2), (SYSTEM(unstable)), (SYSTIMER(unstable)),
        (TEE(unstable)), (TIMG0(unstable)), (TIMG1(unstable)), (UART0), (UART1),
        (USB_DEVICE(unstable)), (DMA_CH0(unstable)), (DMA_CH1(unstable)), (BT(unstable)),
        (FLASH(unstable)), (LP_CORE(unstable)), (SW_INTERRUPT(unstable)), (WIFI),
        (MEM2MEM0(unstable)), (MEM2MEM1(unstable)), (MEM2MEM2(unstable)),
        (MEM2MEM3(unstable)), (MEM2MEM4(unstable)), (MEM2MEM5(unstable)),
        (MEM2MEM6(unstable)), (MEM2MEM7(unstable)), (MEM2MEM8(unstable)),
        (MEM2MEM9(unstable)), (MEM2MEM10(unstable)), (MEM2MEM11(unstable)),
        (PSRAM(unstable)))); _for_each_inner_peripheral!((dma_eligible(MEM2MEM0,
        Mem2mem0, 0), (SPI2, Spi2, 1), (MEM2MEM1, Mem2mem1, 2), (I2S0, I2s0, 3),
        (MEM2MEM2, Mem2mem2, 4), (MEM2MEM3, Mem2mem3, 5), (MEM2MEM4, Mem2mem4, 6), (SHA,
        Sha, 7), (MEM2MEM5, Mem2mem5, 9), (MEM2MEM6, Mem2mem6, 10), (MEM2MEM7, Mem2mem7,
        11), (MEM2MEM8, Mem2mem8, 12), (MEM2MEM9, Mem2mem9, 13), (MEM2MEM10, Mem2mem10,
        14), (MEM2MEM11, Mem2mem11, 15)));
    };
}
/// This macro can be used to generate code for each `GPIOn` instance.
///
/// For an explanation on the general syntax, as well as usage of individual/repeated
/// matchers, refer to [the crate-level documentation][crate#for_each-macros].
///
/// This macro has one option for its "Individual matcher" case:
///
/// Syntax: `($n:literal, $gpio:ident ($($digital_input_function:ident =>
/// $digital_input_signal:ident)*) ($($digital_output_function:ident =>
/// $digital_output_signal:ident)*) ($([$pin_attribute:ident])*))`
///
/// Macro fragments:
///
/// - `$n`: the number of the GPIO. For `GPIO0`, `$n` is 0.
/// - `$gpio`: the name of the GPIO.
/// - `$digital_input_function`: the number of the digital function, as an identifier (i.e. for
///   function 0 this is `_0`).
/// - `$digital_input_function`: the name of the digital function, as an identifier.
/// - `$digital_output_function`: the number of the digital function, as an identifier (i.e. for
///   function 0 this is `_0`).
/// - `$digital_output_function`: the name of the digital function, as an identifier.
/// - `$pin_attribute`: `Input` and/or `Output`, marks the possible directions of the GPIO.
///   Bracketed so that they can also be matched as optional fragments. Order is always Input first.
///
/// Example data: `(0, GPIO0 (_5 => EMAC_TX_CLK) (_1 => CLK_OUT1 _5 => EMAC_TX_CLK) ([Input]
/// [Output]))`
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_gpio {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_gpio { $(($pattern) => $code;)* ($other : tt) => {}
        } _for_each_inner_gpio!((0, GPIO0() () ([Input] [Output])));
        _for_each_inner_gpio!((1, GPIO1() () ([Input] [Output])));
        _for_each_inner_gpio!((2, GPIO2(_2 => FSPIQ) (_2 => FSPIQ) ([Input] [Output])));
        _for_each_inner_gpio!((3, GPIO3(_0 => MTMS _2 => FSPIHD) (_2 => FSPIHD) ([Input]
        [Output]))); _for_each_inner_gpio!((4, GPIO4(_0 => MTDI _2 => FSPIWP) (_2 =>
        FSPIWP) ([Input] [Output]))); _for_each_inner_gpio!((5, GPIO5(_0 => MTCK) ()
        ([Input] [Output]))); _for_each_inner_gpio!((6, GPIO6(_0 => MTDO _2 => FSPICLK)
        (_2 => FSPICLK) ([Input] [Output]))); _for_each_inner_gpio!((7, GPIO7(_2 =>
        FSPID) (_2 => FSPID) ([Input] [Output]))); _for_each_inner_gpio!((8, GPIO8(_2 =>
        FSPICS0) (_2 => FSPICS0) ([Input] [Output]))); _for_each_inner_gpio!((9, GPIO9()
        () ([Input] [Output]))); _for_each_inner_gpio!((10, GPIO10(_0 => U0RXD) ()
        ([Input] [Output]))); _for_each_inner_gpio!((11, GPIO11() (_0 => U0TXD) ([Input]
        [Output]))); _for_each_inner_gpio!((12, GPIO12() () ([Input] [Output])));
        _for_each_inner_gpio!((13, GPIO13() () ([Input] [Output])));
        _for_each_inner_gpio!((14, GPIO14() (_0 => FSPICS1) ([Input] [Output])));
        _for_each_inner_gpio!((15, GPIO15(_0 => FSPICS0) (_0 => FSPICS0) ([Input]
        [Output]))); _for_each_inner_gpio!((16, GPIO16(_0 => FSPIQ) (_0 => FSPIQ)
        ([Input] [Output]))); _for_each_inner_gpio!((17, GPIO17(_0 => FSPIWP) (_0 =>
        FSPIWP) ([Input] [Output]))); _for_each_inner_gpio!((18, GPIO18() () ([Input]
        [Output]))); _for_each_inner_gpio!((19, GPIO19(_0 => FSPIHD) (_0 => FSPIHD)
        ([Input] [Output]))); _for_each_inner_gpio!((20, GPIO20(_0 => FSPICLK) (_0 =>
        FSPICLK) ([Input] [Output]))); _for_each_inner_gpio!((21, GPIO21(_0 => FSPID) (_0
        => FSPID) ([Input] [Output]))); _for_each_inner_gpio!((22, GPIO22(_0 =>
        SDIO_DATA2) () ([Input] [Output]))); _for_each_inner_gpio!((23, GPIO23(_0 =>
        SDIO_DATA3) () ([Input] [Output]))); _for_each_inner_gpio!((24, GPIO24() ()
        ([Input] [Output]))); _for_each_inner_gpio!((25, GPIO25(_0 => SDIO_CMD) ()
        ([Input] [Output]))); _for_each_inner_gpio!((26, GPIO26(_0 => SDIO_CLK) ()
        ([Input] [Output]))); _for_each_inner_gpio!((27, GPIO27(_0 => SDIO_DATA0) ()
        ([Input] [Output]))); _for_each_inner_gpio!((28, GPIO28(_0 => SDIO_DATA1) ()
        ([Input] [Output]))); _for_each_inner_gpio!((29, GPIO29() () ([Input]
        [Output]))); _for_each_inner_gpio!((all(0, GPIO0() () ([Input] [Output])), (1,
        GPIO1() () ([Input] [Output])), (2, GPIO2(_2 => FSPIQ) (_2 => FSPIQ) ([Input]
        [Output])), (3, GPIO3(_0 => MTMS _2 => FSPIHD) (_2 => FSPIHD) ([Input]
        [Output])), (4, GPIO4(_0 => MTDI _2 => FSPIWP) (_2 => FSPIWP) ([Input]
        [Output])), (5, GPIO5(_0 => MTCK) () ([Input] [Output])), (6, GPIO6(_0 => MTDO _2
        => FSPICLK) (_2 => FSPICLK) ([Input] [Output])), (7, GPIO7(_2 => FSPID) (_2 =>
        FSPID) ([Input] [Output])), (8, GPIO8(_2 => FSPICS0) (_2 => FSPICS0) ([Input]
        [Output])), (9, GPIO9() () ([Input] [Output])), (10, GPIO10(_0 => U0RXD) ()
        ([Input] [Output])), (11, GPIO11() (_0 => U0TXD) ([Input] [Output])), (12,
        GPIO12() () ([Input] [Output])), (13, GPIO13() () ([Input] [Output])), (14,
        GPIO14() (_0 => FSPICS1) ([Input] [Output])), (15, GPIO15(_0 => FSPICS0) (_0 =>
        FSPICS0) ([Input] [Output])), (16, GPIO16(_0 => FSPIQ) (_0 => FSPIQ) ([Input]
        [Output])), (17, GPIO17(_0 => FSPIWP) (_0 => FSPIWP) ([Input] [Output])), (18,
        GPIO18() () ([Input] [Output])), (19, GPIO19(_0 => FSPIHD) (_0 => FSPIHD)
        ([Input] [Output])), (20, GPIO20(_0 => FSPICLK) (_0 => FSPICLK) ([Input]
        [Output])), (21, GPIO21(_0 => FSPID) (_0 => FSPID) ([Input] [Output])), (22,
        GPIO22(_0 => SDIO_DATA2) () ([Input] [Output])), (23, GPIO23(_0 => SDIO_DATA3) ()
        ([Input] [Output])), (24, GPIO24() () ([Input] [Output])), (25, GPIO25(_0 =>
        SDIO_CMD) () ([Input] [Output])), (26, GPIO26(_0 => SDIO_CLK) () ([Input]
        [Output])), (27, GPIO27(_0 => SDIO_DATA0) () ([Input] [Output])), (28, GPIO28(_0
        => SDIO_DATA1) () ([Input] [Output])), (29, GPIO29() () ([Input] [Output]))));
    };
}
/// This macro can be used to generate code for each analog function of each GPIO.
///
/// For an explanation on the general syntax, as well as usage of individual/repeated
/// matchers, refer to [the crate-level documentation][crate#for_each-macros].
///
/// This macro has two options for its "Individual matcher" case:
///
/// - `all`: `($signal:ident, $gpio:ident)` - simple case where you only need identifiers
/// - `all_expanded`: `(($signal:ident, $group:ident $(, $number:literal)+), $gpio:ident)` -
///   expanded signal case, where you need the number(s) of a signal, or the general group to which
///   the signal belongs. For example, in case of `ADC2_CH3` the expanded form looks like
///   `(ADC2_CH3, ADCn_CHm, 2, 3)`.
///
/// Macro fragments:
///
/// - `$signal`: the name of the signal.
/// - `$group`: the name of the signal, with numbers replaced by placeholders. For `ADC2_CH3` this
///   is `ADCn_CHm`.
/// - `$number`: the numbers extracted from `$signal`.
/// - `$gpio`: the name of the GPIO.
///
/// Example data:
/// - `(ADC2_CH5, GPIO12)`
/// - `((ADC2_CH5, ADCn_CHm, 2, 5), GPIO12)`
///
/// The expanded syntax is only available when the signal has at least one numbered component.
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_analog_function {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_analog_function { $(($pattern) => $code;)* ($other :
        tt) => {} } _for_each_inner_analog_function!((XTAL_32K_P, GPIO0));
        _for_each_inner_analog_function!((XTAL_32K_N, GPIO1));
        _for_each_inner_analog_function!((ZCD0, GPIO8));
        _for_each_inner_analog_function!((ZCD1, GPIO9));
        _for_each_inner_analog_function!((USB_DM, GPIO12));
        _for_each_inner_analog_function!((USB_DP, GPIO13));
        _for_each_inner_analog_function!(((ZCD0, ZCDn, 0), GPIO8));
        _for_each_inner_analog_function!(((ZCD1, ZCDn, 1), GPIO9));
        _for_each_inner_analog_function!((all(XTAL_32K_P, GPIO0), (XTAL_32K_N, GPIO1),
        (ZCD0, GPIO8), (ZCD1, GPIO9), (USB_DM, GPIO12), (USB_DP, GPIO13)));
        _for_each_inner_analog_function!((all_expanded((ZCD0, ZCDn, 0), GPIO8), ((ZCD1,
        ZCDn, 1), GPIO9)));
    };
}
/// This macro can be used to generate code for each LP/RTC function of each GPIO.
///
/// For an explanation on the general syntax, as well as usage of individual/repeated
/// matchers, refer to [the crate-level documentation][crate#for_each-macros].
///
/// This macro has two options for its "Individual matcher" case:
///
/// - `all`: `($signal:ident, $gpio:ident)` - simple case where you only need identifiers
/// - `all_expanded`: `(($signal:ident, $group:ident $(, $number:literal)+), $gpio:ident)` -
///   expanded signal case, where you need the number(s) of a signal, or the general group to which
///   the signal belongs. For example, in case of `SAR_I2C_SCL_1` the expanded form looks like
///   `(SAR_I2C_SCL_1, SAR_I2C_SCL_n, 1)`.
///
/// Macro fragments:
///
/// - `$signal`: the name of the signal.
/// - `$group`: the name of the signal, with numbers replaced by placeholders. For `ADC2_CH3` this
///   is `ADCn_CHm`.
/// - `$number`: the numbers extracted from `$signal`.
/// - `$gpio`: the name of the GPIO.
///
/// Example data:
/// - `(RTC_GPIO15, GPIO12)`
/// - `((RTC_GPIO15, RTC_GPIOn, 15), GPIO12)`
///
/// The expanded syntax is only available when the signal has at least one numbered component.
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! for_each_lp_function {
    ($($pattern:tt => $code:tt;)*) => {
        macro_rules! _for_each_inner_lp_function { $(($pattern) => $code;)* ($other : tt)
        => {} } _for_each_inner_lp_function!((all));
        _for_each_inner_lp_function!((all_expanded));
    };
}
/// Defines the `InputSignal` and `OutputSignal` enums.
///
/// This macro is intended to be called in esp-hal only.
#[macro_export]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! define_io_mux_signals {
    () => {
        #[allow(non_camel_case_types, clippy::upper_case_acronyms)]
        #[derive(Debug, PartialEq, Copy, Clone)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        #[doc(hidden)]
        pub enum InputSignal {
            U0RXD               = 6,
            U0CTS               = 7,
            U0DSR               = 8,
            U1RXD               = 9,
            U1CTS               = 10,
            U1DSR               = 11,
            I2S_MCLK            = 12,
            I2SO_BCK            = 13,
            I2SO_WS             = 14,
            I2SI_SD             = 15,
            I2SI_BCK            = 16,
            I2SI_WS             = 17,
            CPU_GPIO_0          = 27,
            CPU_GPIO_1          = 28,
            CPU_GPIO_2          = 29,
            CPU_GPIO_3          = 30,
            CPU_GPIO_4          = 31,
            CPU_GPIO_5          = 32,
            CPU_GPIO_6          = 33,
            CPU_GPIO_7          = 34,
            USB_JTAG_TDO_BRIDGE = 35,
            I2CEXT0_SCL         = 46,
            I2CEXT0_SDA         = 47,
            FSPICLK             = 64,
            FSPIQ               = 65,
            FSPID               = 66,
            FSPIHD              = 67,
            FSPIWP              = 68,
            FSPICS0             = 69,
            U2RXD               = 72,
            U2CTS               = 73,
            U2DSR               = 74,
            SIG_IN_FUNC97       = 97,
            SIG_IN_FUNC98       = 98,
            SIG_IN_FUNC99       = 99,
            SIG_IN_FUNC100      = 100,
            SDIO_CLK,
            SDIO_CMD,
            SDIO_DATA0,
            SDIO_DATA1,
            SDIO_DATA2,
            SDIO_DATA3,
            MTDI,
            MTDO,
            MTCK,
            MTMS,
        }
        #[allow(non_camel_case_types, clippy::upper_case_acronyms)]
        #[derive(Debug, PartialEq, Copy, Clone)]
        #[cfg_attr(feature = "defmt", derive(defmt::Format))]
        #[doc(hidden)]
        pub enum OutputSignal {
            LEDC_LS_SIG0    = 0,
            LEDC_LS_SIG1    = 1,
            LEDC_LS_SIG2    = 2,
            LEDC_LS_SIG3    = 3,
            LEDC_LS_SIG4    = 4,
            LEDC_LS_SIG5    = 5,
            U0TXD           = 6,
            U0RTS           = 7,
            U0DTR           = 8,
            U1TXD           = 9,
            U1RTS           = 10,
            U1DTR           = 11,
            I2S_MCLK        = 12,
            I2SO_BCK        = 13,
            I2SO_WS         = 14,
            I2SO_SD         = 15,
            I2SI_BCK        = 16,
            I2SI_WS         = 17,
            I2SO_SD1        = 18,
            CPU_GPIO_0      = 27,
            CPU_GPIO_1      = 28,
            CPU_GPIO_2      = 29,
            CPU_GPIO_3      = 30,
            CPU_GPIO_4      = 31,
            CPU_GPIO_5      = 32,
            CPU_GPIO_6      = 33,
            CPU_GPIO_7      = 34,
            I2CEXT0_SCL     = 46,
            I2CEXT0_SDA     = 47,
            FSPICLK         = 64,
            FSPIQ           = 65,
            FSPID           = 66,
            FSPIHD          = 67,
            FSPIWP          = 68,
            FSPICS0         = 69,
            U2TXD           = 72,
            U2RTS           = 73,
            U2DTR           = 74,
            FSPICS1         = 102,
            FSPICS2         = 103,
            FSPICS3         = 104,
            FSPICS4         = 105,
            FSPICS5         = 106,
            SDIO_TOHOST_INT = 124,
            GPIO            = 256,
        }
    };
}
/// Defines and implements the `io_mux_reg` function.
///
/// The generated function has the following signature:
///
/// ```rust,ignore
/// pub(crate) fn io_mux_reg(gpio_num: u8) -> &'static crate::pac::io_mux::GPIO0 {
///     // ...
/// # unimplemented!()
/// }
/// ```
///
/// This macro is intended to be called in esp-hal only.
#[macro_export]
#[expect(clippy::crate_in_macro_def)]
#[cfg_attr(docsrs, doc(cfg(feature = "_device-selected")))]
macro_rules! define_io_mux_reg {
    () => {
        pub(crate) fn io_mux_reg(gpio_num: u8) -> &'static crate::pac::io_mux::GPIO {
            crate::peripherals::IO_MUX::regs().gpio(gpio_num as usize)
        }
    };
}