esp-hal 0.16.1

Bare-metal HAL for Espressif devices
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62

//! # Peripheral Instances
//!
//! This module creates singleton instances for each of the various peripherals,
//! and re-exports them to allow users to access and use them in their
//! applications.
//!
//! Should be noted that that the module also re-exports the [Interrupt] enum
//! from the PAC, allowing users to handle interrupts associated with these
//! peripherals.

use esp32c3 as pac;
// We need to export this for users to use
pub use pac::Interrupt;

// We need to export this in the hal for the drivers to use
pub(crate) use self::peripherals::*;

// Note that certain are marked with `virtual` in the invocation of the
// `peripherals!` macro below. Basically, this indicates there's no physical
// peripheral (no `PSRAM`, `RADIO`, etc. peripheral in the PACs), so we're
// creating "virtual peripherals" for them.
crate::peripherals! {
    ADC1 <= virtual,
    ADC2 <= virtual,
    AES <= AES,
    APB_CTRL <= APB_CTRL,
    ASSIST_DEBUG <= ASSIST_DEBUG,
    BT <= virtual,
    DMA <= DMA,
    DS <= DS,
    EFUSE <= EFUSE,
    EXTMEM <= EXTMEM,
    GPIO <= GPIO,
    GPIO_SD <= GPIO_SD,
    HMAC <= HMAC,
    I2C0 <= I2C0,
    I2S0 <= I2S0,
    INTERRUPT_CORE0 <= INTERRUPT_CORE0,
    IO_MUX <= IO_MUX,
    LEDC <= LEDC,
    LPWR <= RTC_CNTL,
    RMT <= RMT,
    RNG <= RNG,
    RSA <= RSA,
    SENSITIVE <= SENSITIVE,
    SHA <= SHA,
    SPI0 <= SPI0,
    SPI1 <= SPI1,
    SPI2 <= SPI2,
    SYSTEM <= SYSTEM,
    SYSTIMER <= SYSTIMER,
    TIMG0 <= TIMG0,
    TIMG1 <= TIMG1,
    TWAI0 <= TWAI0,
    UART0 <= UART0,
    UART1 <= UART1,
    UHCI0 <= UHCI0,
    UHCI1 <= UHCI1,
    USB_DEVICE <= USB_DEVICE,
    WIFI <= virtual,
    XTS_AES <= XTS_AES,
}