#[doc = "Register `ROUTE` reader"]
pub struct R(crate::R<ROUTE_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<ROUTE_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<ROUTE_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<ROUTE_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `ROUTE` writer"]
pub struct W(crate::W<ROUTE_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<ROUTE_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<ROUTE_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<ROUTE_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `SWCLKPEN` reader - Serial Wire Clock Pin Enable"]
pub type SWCLKPEN_R = crate::BitReader<bool>;
#[doc = "Field `SWCLKPEN` writer - Serial Wire Clock Pin Enable"]
pub type SWCLKPEN_W<'a> = crate::BitWriter<'a, u32, ROUTE_SPEC, bool, 0>;
#[doc = "Field `SWDIOPEN` reader - Serial Wire Data Pin Enable"]
pub type SWDIOPEN_R = crate::BitReader<bool>;
#[doc = "Field `SWDIOPEN` writer - Serial Wire Data Pin Enable"]
pub type SWDIOPEN_W<'a> = crate::BitWriter<'a, u32, ROUTE_SPEC, bool, 1>;
#[doc = "Field `SWOPEN` reader - Serial Wire Viewer Output Pin Enable"]
pub type SWOPEN_R = crate::BitReader<bool>;
#[doc = "Field `SWOPEN` writer - Serial Wire Viewer Output Pin Enable"]
pub type SWOPEN_W<'a> = crate::BitWriter<'a, u32, ROUTE_SPEC, bool, 2>;
#[doc = "I/O Location\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum SWLOCATION_A {
#[doc = "0: Location 0"]
LOC0 = 0,
#[doc = "1: Location 1"]
LOC1 = 1,
#[doc = "2: Location 2"]
LOC2 = 2,
#[doc = "3: Location 3"]
LOC3 = 3,
}
impl From<SWLOCATION_A> for u8 {
#[inline(always)]
fn from(variant: SWLOCATION_A) -> Self {
variant as _
}
}
#[doc = "Field `SWLOCATION` reader - I/O Location"]
pub type SWLOCATION_R = crate::FieldReader<u8, SWLOCATION_A>;
impl SWLOCATION_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> SWLOCATION_A {
match self.bits {
0 => SWLOCATION_A::LOC0,
1 => SWLOCATION_A::LOC1,
2 => SWLOCATION_A::LOC2,
3 => SWLOCATION_A::LOC3,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `LOC0`"]
#[inline(always)]
pub fn is_loc0(&self) -> bool {
*self == SWLOCATION_A::LOC0
}
#[doc = "Checks if the value of the field is `LOC1`"]
#[inline(always)]
pub fn is_loc1(&self) -> bool {
*self == SWLOCATION_A::LOC1
}
#[doc = "Checks if the value of the field is `LOC2`"]
#[inline(always)]
pub fn is_loc2(&self) -> bool {
*self == SWLOCATION_A::LOC2
}
#[doc = "Checks if the value of the field is `LOC3`"]
#[inline(always)]
pub fn is_loc3(&self) -> bool {
*self == SWLOCATION_A::LOC3
}
}
#[doc = "Field `SWLOCATION` writer - I/O Location"]
pub type SWLOCATION_W<'a> = crate::FieldWriterSafe<'a, u32, ROUTE_SPEC, u8, SWLOCATION_A, 2, 8>;
impl<'a> SWLOCATION_W<'a> {
#[doc = "Location 0"]
#[inline(always)]
pub fn loc0(self) -> &'a mut W {
self.variant(SWLOCATION_A::LOC0)
}
#[doc = "Location 1"]
#[inline(always)]
pub fn loc1(self) -> &'a mut W {
self.variant(SWLOCATION_A::LOC1)
}
#[doc = "Location 2"]
#[inline(always)]
pub fn loc2(self) -> &'a mut W {
self.variant(SWLOCATION_A::LOC2)
}
#[doc = "Location 3"]
#[inline(always)]
pub fn loc3(self) -> &'a mut W {
self.variant(SWLOCATION_A::LOC3)
}
}
#[doc = "Field `TCLKPEN` reader - ETM Trace Clock Pin Enable"]
pub type TCLKPEN_R = crate::BitReader<bool>;
#[doc = "Field `TCLKPEN` writer - ETM Trace Clock Pin Enable"]
pub type TCLKPEN_W<'a> = crate::BitWriter<'a, u32, ROUTE_SPEC, bool, 12>;
#[doc = "Field `TD0PEN` reader - ETM Trace Data Pin Enable"]
pub type TD0PEN_R = crate::BitReader<bool>;
#[doc = "Field `TD0PEN` writer - ETM Trace Data Pin Enable"]
pub type TD0PEN_W<'a> = crate::BitWriter<'a, u32, ROUTE_SPEC, bool, 13>;
#[doc = "Field `TD1PEN` reader - ETM Trace Data Pin Enable"]
pub type TD1PEN_R = crate::BitReader<bool>;
#[doc = "Field `TD1PEN` writer - ETM Trace Data Pin Enable"]
pub type TD1PEN_W<'a> = crate::BitWriter<'a, u32, ROUTE_SPEC, bool, 14>;
#[doc = "Field `TD2PEN` reader - ETM Trace Data Pin Enable"]
pub type TD2PEN_R = crate::BitReader<bool>;
#[doc = "Field `TD2PEN` writer - ETM Trace Data Pin Enable"]
pub type TD2PEN_W<'a> = crate::BitWriter<'a, u32, ROUTE_SPEC, bool, 15>;
#[doc = "Field `TD3PEN` reader - ETM Trace Data Pin Enable"]
pub type TD3PEN_R = crate::BitReader<bool>;
#[doc = "Field `TD3PEN` writer - ETM Trace Data Pin Enable"]
pub type TD3PEN_W<'a> = crate::BitWriter<'a, u32, ROUTE_SPEC, bool, 16>;
#[doc = "I/O Location\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum ETMLOCATION_A {
#[doc = "0: Location 0"]
LOC0 = 0,
#[doc = "1: Location 1"]
LOC1 = 1,
#[doc = "2: Location 2"]
LOC2 = 2,
#[doc = "3: Location 3"]
LOC3 = 3,
}
impl From<ETMLOCATION_A> for u8 {
#[inline(always)]
fn from(variant: ETMLOCATION_A) -> Self {
variant as _
}
}
#[doc = "Field `ETMLOCATION` reader - I/O Location"]
pub type ETMLOCATION_R = crate::FieldReader<u8, ETMLOCATION_A>;
impl ETMLOCATION_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> ETMLOCATION_A {
match self.bits {
0 => ETMLOCATION_A::LOC0,
1 => ETMLOCATION_A::LOC1,
2 => ETMLOCATION_A::LOC2,
3 => ETMLOCATION_A::LOC3,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `LOC0`"]
#[inline(always)]
pub fn is_loc0(&self) -> bool {
*self == ETMLOCATION_A::LOC0
}
#[doc = "Checks if the value of the field is `LOC1`"]
#[inline(always)]
pub fn is_loc1(&self) -> bool {
*self == ETMLOCATION_A::LOC1
}
#[doc = "Checks if the value of the field is `LOC2`"]
#[inline(always)]
pub fn is_loc2(&self) -> bool {
*self == ETMLOCATION_A::LOC2
}
#[doc = "Checks if the value of the field is `LOC3`"]
#[inline(always)]
pub fn is_loc3(&self) -> bool {
*self == ETMLOCATION_A::LOC3
}
}
#[doc = "Field `ETMLOCATION` writer - I/O Location"]
pub type ETMLOCATION_W<'a> = crate::FieldWriterSafe<'a, u32, ROUTE_SPEC, u8, ETMLOCATION_A, 2, 24>;
impl<'a> ETMLOCATION_W<'a> {
#[doc = "Location 0"]
#[inline(always)]
pub fn loc0(self) -> &'a mut W {
self.variant(ETMLOCATION_A::LOC0)
}
#[doc = "Location 1"]
#[inline(always)]
pub fn loc1(self) -> &'a mut W {
self.variant(ETMLOCATION_A::LOC1)
}
#[doc = "Location 2"]
#[inline(always)]
pub fn loc2(self) -> &'a mut W {
self.variant(ETMLOCATION_A::LOC2)
}
#[doc = "Location 3"]
#[inline(always)]
pub fn loc3(self) -> &'a mut W {
self.variant(ETMLOCATION_A::LOC3)
}
}
impl R {
#[doc = "Bit 0 - Serial Wire Clock Pin Enable"]
#[inline(always)]
pub fn swclkpen(&self) -> SWCLKPEN_R {
SWCLKPEN_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - Serial Wire Data Pin Enable"]
#[inline(always)]
pub fn swdiopen(&self) -> SWDIOPEN_R {
SWDIOPEN_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - Serial Wire Viewer Output Pin Enable"]
#[inline(always)]
pub fn swopen(&self) -> SWOPEN_R {
SWOPEN_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bits 8:9 - I/O Location"]
#[inline(always)]
pub fn swlocation(&self) -> SWLOCATION_R {
SWLOCATION_R::new(((self.bits >> 8) & 3) as u8)
}
#[doc = "Bit 12 - ETM Trace Clock Pin Enable"]
#[inline(always)]
pub fn tclkpen(&self) -> TCLKPEN_R {
TCLKPEN_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bit 13 - ETM Trace Data Pin Enable"]
#[inline(always)]
pub fn td0pen(&self) -> TD0PEN_R {
TD0PEN_R::new(((self.bits >> 13) & 1) != 0)
}
#[doc = "Bit 14 - ETM Trace Data Pin Enable"]
#[inline(always)]
pub fn td1pen(&self) -> TD1PEN_R {
TD1PEN_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15 - ETM Trace Data Pin Enable"]
#[inline(always)]
pub fn td2pen(&self) -> TD2PEN_R {
TD2PEN_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16 - ETM Trace Data Pin Enable"]
#[inline(always)]
pub fn td3pen(&self) -> TD3PEN_R {
TD3PEN_R::new(((self.bits >> 16) & 1) != 0)
}
#[doc = "Bits 24:25 - I/O Location"]
#[inline(always)]
pub fn etmlocation(&self) -> ETMLOCATION_R {
ETMLOCATION_R::new(((self.bits >> 24) & 3) as u8)
}
}
impl W {
#[doc = "Bit 0 - Serial Wire Clock Pin Enable"]
#[inline(always)]
pub fn swclkpen(&mut self) -> SWCLKPEN_W {
SWCLKPEN_W::new(self)
}
#[doc = "Bit 1 - Serial Wire Data Pin Enable"]
#[inline(always)]
pub fn swdiopen(&mut self) -> SWDIOPEN_W {
SWDIOPEN_W::new(self)
}
#[doc = "Bit 2 - Serial Wire Viewer Output Pin Enable"]
#[inline(always)]
pub fn swopen(&mut self) -> SWOPEN_W {
SWOPEN_W::new(self)
}
#[doc = "Bits 8:9 - I/O Location"]
#[inline(always)]
pub fn swlocation(&mut self) -> SWLOCATION_W {
SWLOCATION_W::new(self)
}
#[doc = "Bit 12 - ETM Trace Clock Pin Enable"]
#[inline(always)]
pub fn tclkpen(&mut self) -> TCLKPEN_W {
TCLKPEN_W::new(self)
}
#[doc = "Bit 13 - ETM Trace Data Pin Enable"]
#[inline(always)]
pub fn td0pen(&mut self) -> TD0PEN_W {
TD0PEN_W::new(self)
}
#[doc = "Bit 14 - ETM Trace Data Pin Enable"]
#[inline(always)]
pub fn td1pen(&mut self) -> TD1PEN_W {
TD1PEN_W::new(self)
}
#[doc = "Bit 15 - ETM Trace Data Pin Enable"]
#[inline(always)]
pub fn td2pen(&mut self) -> TD2PEN_W {
TD2PEN_W::new(self)
}
#[doc = "Bit 16 - ETM Trace Data Pin Enable"]
#[inline(always)]
pub fn td3pen(&mut self) -> TD3PEN_W {
TD3PEN_W::new(self)
}
#[doc = "Bits 24:25 - I/O Location"]
#[inline(always)]
pub fn etmlocation(&mut self) -> ETMLOCATION_W {
ETMLOCATION_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "I/O Routing Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [route](index.html) module"]
pub struct ROUTE_SPEC;
impl crate::RegisterSpec for ROUTE_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [route::R](R) reader structure"]
impl crate::Readable for ROUTE_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [route::W](W) writer structure"]
impl crate::Writable for ROUTE_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets ROUTE to value 0x03"]
impl crate::Resettable for ROUTE_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0x03
}
}