#[doc = "Register `CH11_INTERACT` reader"]
pub struct R(crate::R<CH11_INTERACT_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<CH11_INTERACT_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<CH11_INTERACT_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<CH11_INTERACT_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `CH11_INTERACT` writer"]
pub struct W(crate::W<CH11_INTERACT_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<CH11_INTERACT_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<CH11_INTERACT_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<CH11_INTERACT_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `ACMPTHRES` reader - Set ACMP threshold"]
pub type ACMPTHRES_R = crate::FieldReader<u16, u16>;
#[doc = "Field `ACMPTHRES` writer - Set ACMP threshold"]
pub type ACMPTHRES_W<'a> = crate::FieldWriter<'a, u32, CH11_INTERACT_SPEC, u16, u16, 12, 0>;
#[doc = "Field `SAMPLE` reader - Select sample mode"]
pub type SAMPLE_R = crate::BitReader<bool>;
#[doc = "Field `SAMPLE` writer - Select sample mode"]
pub type SAMPLE_W<'a> = crate::BitWriter<'a, u32, CH11_INTERACT_SPEC, bool, 12>;
#[doc = "Enable interrupt generation\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum SETIF_A {
#[doc = "0: No interrupt is generated"]
NONE = 0,
#[doc = "1: Set interrupt flag if the sensor triggers."]
LEVEL = 1,
#[doc = "2: Set interrupt flag on positive edge on the sensor state"]
POSEDGE = 2,
#[doc = "3: Set interrupt flag on negative edge on the sensor state"]
NEGEDGE = 3,
}
impl From<SETIF_A> for u8 {
#[inline(always)]
fn from(variant: SETIF_A) -> Self {
variant as _
}
}
#[doc = "Field `SETIF` reader - Enable interrupt generation"]
pub type SETIF_R = crate::FieldReader<u8, SETIF_A>;
impl SETIF_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> SETIF_A {
match self.bits {
0 => SETIF_A::NONE,
1 => SETIF_A::LEVEL,
2 => SETIF_A::POSEDGE,
3 => SETIF_A::NEGEDGE,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `NONE`"]
#[inline(always)]
pub fn is_none(&self) -> bool {
*self == SETIF_A::NONE
}
#[doc = "Checks if the value of the field is `LEVEL`"]
#[inline(always)]
pub fn is_level(&self) -> bool {
*self == SETIF_A::LEVEL
}
#[doc = "Checks if the value of the field is `POSEDGE`"]
#[inline(always)]
pub fn is_posedge(&self) -> bool {
*self == SETIF_A::POSEDGE
}
#[doc = "Checks if the value of the field is `NEGEDGE`"]
#[inline(always)]
pub fn is_negedge(&self) -> bool {
*self == SETIF_A::NEGEDGE
}
}
#[doc = "Field `SETIF` writer - Enable interrupt generation"]
pub type SETIF_W<'a> = crate::FieldWriterSafe<'a, u32, CH11_INTERACT_SPEC, u8, SETIF_A, 2, 13>;
impl<'a> SETIF_W<'a> {
#[doc = "No interrupt is generated"]
#[inline(always)]
pub fn none(self) -> &'a mut W {
self.variant(SETIF_A::NONE)
}
#[doc = "Set interrupt flag if the sensor triggers."]
#[inline(always)]
pub fn level(self) -> &'a mut W {
self.variant(SETIF_A::LEVEL)
}
#[doc = "Set interrupt flag on positive edge on the sensor state"]
#[inline(always)]
pub fn posedge(self) -> &'a mut W {
self.variant(SETIF_A::POSEDGE)
}
#[doc = "Set interrupt flag on negative edge on the sensor state"]
#[inline(always)]
pub fn negedge(self) -> &'a mut W {
self.variant(SETIF_A::NEGEDGE)
}
}
#[doc = "Set GPIO mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum EXMODE_A {
#[doc = "0: Disabled"]
DISABLE = 0,
#[doc = "1: Push Pull, GPIO is driven high"]
HIGH = 1,
#[doc = "2: Push Pull, GPIO is driven low"]
LOW = 2,
#[doc = "3: DAC output"]
DACOUT = 3,
}
impl From<EXMODE_A> for u8 {
#[inline(always)]
fn from(variant: EXMODE_A) -> Self {
variant as _
}
}
#[doc = "Field `EXMODE` reader - Set GPIO mode"]
pub type EXMODE_R = crate::FieldReader<u8, EXMODE_A>;
impl EXMODE_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> EXMODE_A {
match self.bits {
0 => EXMODE_A::DISABLE,
1 => EXMODE_A::HIGH,
2 => EXMODE_A::LOW,
3 => EXMODE_A::DACOUT,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLE`"]
#[inline(always)]
pub fn is_disable(&self) -> bool {
*self == EXMODE_A::DISABLE
}
#[doc = "Checks if the value of the field is `HIGH`"]
#[inline(always)]
pub fn is_high(&self) -> bool {
*self == EXMODE_A::HIGH
}
#[doc = "Checks if the value of the field is `LOW`"]
#[inline(always)]
pub fn is_low(&self) -> bool {
*self == EXMODE_A::LOW
}
#[doc = "Checks if the value of the field is `DACOUT`"]
#[inline(always)]
pub fn is_dacout(&self) -> bool {
*self == EXMODE_A::DACOUT
}
}
#[doc = "Field `EXMODE` writer - Set GPIO mode"]
pub type EXMODE_W<'a> = crate::FieldWriterSafe<'a, u32, CH11_INTERACT_SPEC, u8, EXMODE_A, 2, 15>;
impl<'a> EXMODE_W<'a> {
#[doc = "Disabled"]
#[inline(always)]
pub fn disable(self) -> &'a mut W {
self.variant(EXMODE_A::DISABLE)
}
#[doc = "Push Pull, GPIO is driven high"]
#[inline(always)]
pub fn high(self) -> &'a mut W {
self.variant(EXMODE_A::HIGH)
}
#[doc = "Push Pull, GPIO is driven low"]
#[inline(always)]
pub fn low(self) -> &'a mut W {
self.variant(EXMODE_A::LOW)
}
#[doc = "DAC output"]
#[inline(always)]
pub fn dacout(self) -> &'a mut W {
self.variant(EXMODE_A::DACOUT)
}
}
#[doc = "Field `EXCLK` reader - Select clock used for excitation timing"]
pub type EXCLK_R = crate::BitReader<bool>;
#[doc = "Field `EXCLK` writer - Select clock used for excitation timing"]
pub type EXCLK_W<'a> = crate::BitWriter<'a, u32, CH11_INTERACT_SPEC, bool, 17>;
#[doc = "Field `SAMPLECLK` reader - Select clock used for timing of sample delay"]
pub type SAMPLECLK_R = crate::BitReader<bool>;
#[doc = "Field `SAMPLECLK` writer - Select clock used for timing of sample delay"]
pub type SAMPLECLK_W<'a> = crate::BitWriter<'a, u32, CH11_INTERACT_SPEC, bool, 18>;
#[doc = "Field `ALTEX` reader - Use alternative excite pin"]
pub type ALTEX_R = crate::BitReader<bool>;
#[doc = "Field `ALTEX` writer - Use alternative excite pin"]
pub type ALTEX_W<'a> = crate::BitWriter<'a, u32, CH11_INTERACT_SPEC, bool, 19>;
impl R {
#[doc = "Bits 0:11 - Set ACMP threshold"]
#[inline(always)]
pub fn acmpthres(&self) -> ACMPTHRES_R {
ACMPTHRES_R::new((self.bits & 0x0fff) as u16)
}
#[doc = "Bit 12 - Select sample mode"]
#[inline(always)]
pub fn sample(&self) -> SAMPLE_R {
SAMPLE_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bits 13:14 - Enable interrupt generation"]
#[inline(always)]
pub fn setif(&self) -> SETIF_R {
SETIF_R::new(((self.bits >> 13) & 3) as u8)
}
#[doc = "Bits 15:16 - Set GPIO mode"]
#[inline(always)]
pub fn exmode(&self) -> EXMODE_R {
EXMODE_R::new(((self.bits >> 15) & 3) as u8)
}
#[doc = "Bit 17 - Select clock used for excitation timing"]
#[inline(always)]
pub fn exclk(&self) -> EXCLK_R {
EXCLK_R::new(((self.bits >> 17) & 1) != 0)
}
#[doc = "Bit 18 - Select clock used for timing of sample delay"]
#[inline(always)]
pub fn sampleclk(&self) -> SAMPLECLK_R {
SAMPLECLK_R::new(((self.bits >> 18) & 1) != 0)
}
#[doc = "Bit 19 - Use alternative excite pin"]
#[inline(always)]
pub fn altex(&self) -> ALTEX_R {
ALTEX_R::new(((self.bits >> 19) & 1) != 0)
}
}
impl W {
#[doc = "Bits 0:11 - Set ACMP threshold"]
#[inline(always)]
pub fn acmpthres(&mut self) -> ACMPTHRES_W {
ACMPTHRES_W::new(self)
}
#[doc = "Bit 12 - Select sample mode"]
#[inline(always)]
pub fn sample(&mut self) -> SAMPLE_W {
SAMPLE_W::new(self)
}
#[doc = "Bits 13:14 - Enable interrupt generation"]
#[inline(always)]
pub fn setif(&mut self) -> SETIF_W {
SETIF_W::new(self)
}
#[doc = "Bits 15:16 - Set GPIO mode"]
#[inline(always)]
pub fn exmode(&mut self) -> EXMODE_W {
EXMODE_W::new(self)
}
#[doc = "Bit 17 - Select clock used for excitation timing"]
#[inline(always)]
pub fn exclk(&mut self) -> EXCLK_W {
EXCLK_W::new(self)
}
#[doc = "Bit 18 - Select clock used for timing of sample delay"]
#[inline(always)]
pub fn sampleclk(&mut self) -> SAMPLECLK_W {
SAMPLECLK_W::new(self)
}
#[doc = "Bit 19 - Use alternative excite pin"]
#[inline(always)]
pub fn altex(&mut self) -> ALTEX_W {
ALTEX_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "Scan configuration\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ch11_interact](index.html) module"]
pub struct CH11_INTERACT_SPEC;
impl crate::RegisterSpec for CH11_INTERACT_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [ch11_interact::R](R) reader structure"]
impl crate::Readable for CH11_INTERACT_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [ch11_interact::W](W) writer structure"]
impl crate::Writable for CH11_INTERACT_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets CH11_INTERACT to value 0"]
impl crate::Resettable for CH11_INTERACT_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}