da14683-pac 0.2.0

/*
DISCLAIMER
This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products.
No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
applicable laws, including copyright laws.
THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY
LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability
of this software. By using this software, you agree to the additional terms and conditions found by accessing the
following link:
http://www.renesas.com/disclaimer

*/
// Generated from SVD 1.2, with svd2pac 0.6.0 on Thu, 24 Jul 2025 04:45:17 +0000

#![allow(clippy::identity_op)]
#![allow(clippy::module_inception)]
#![allow(clippy::derivable_impls)]
#[allow(unused_imports)]
use crate::common::sealed;
#[allow(unused_imports)]
use crate::common::*;
#[doc = r"CRG_PER registers"]
unsafe impl ::core::marker::Send for super::CrgPer {}
unsafe impl ::core::marker::Sync for super::CrgPer {}
impl super::CrgPer {
    #[allow(unused)]
    #[inline(always)]
    pub(crate) const fn _svd2pac_as_ptr(&self) -> *mut u8 {
        self.ptr
    }

    #[doc = "Peripheral divider register"]
    #[inline(always)]
    pub const fn clk_per_reg(
        &self,
    ) -> &'static crate::common::Reg<self::ClkPerReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::ClkPerReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(4usize),
            )
        }
    }

    #[doc = "PCM divider and enables"]
    #[inline(always)]
    pub const fn pcm_div_reg(
        &self,
    ) -> &'static crate::common::Reg<self::PcmDivReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::PcmDivReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(64usize),
            )
        }
    }

    #[doc = "PCM fractional division register"]
    #[inline(always)]
    pub const fn pcm_fdiv_reg(
        &self,
    ) -> &'static crate::common::Reg<self::PcmFdivReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::PcmFdivReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(66usize),
            )
        }
    }

    #[doc = "PDM divider and enables"]
    #[inline(always)]
    pub const fn pdm_div_reg(
        &self,
    ) -> &'static crate::common::Reg<self::PdmDivReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::PdmDivReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(68usize),
            )
        }
    }

    #[doc = "SRC divider and enables"]
    #[inline(always)]
    pub const fn src_div_reg(
        &self,
    ) -> &'static crate::common::Reg<self::SrcDivReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::SrcDivReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(70usize),
            )
        }
    }

    #[doc = "USB pads control register"]
    #[inline(always)]
    pub const fn usbpad_reg(
        &self,
    ) -> &'static crate::common::Reg<self::UsbpadReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::UsbpadReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(74usize),
            )
        }
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct ClkPerReg_SPEC;
impl crate::sealed::RegSpec for ClkPerReg_SPEC {
    type DataType = u16;
}

#[doc = "Peripheral divider register"]
pub type ClkPerReg = crate::RegValueT<ClkPerReg_SPEC>;

impl ClkPerReg {
    #[doc = "Selects the clock source\n1 = DIV1 clock\n0 = DIVN clock"]
    #[inline(always)]
    pub fn adc_clk_sel(
        self,
    ) -> crate::common::RegisterFieldBool<11, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<11,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Selects the clock source\n1 = DIV1 clock\n0 = DIVN clock"]
    #[inline(always)]
    pub fn kbscan_clk_sel(
        self,
    ) -> crate::common::RegisterFieldBool<10, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<10,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Selects the clock source\n1 = DIV1 clock\n0 = DIVN clock"]
    #[inline(always)]
    pub fn i2c_clk_sel(
        self,
    ) -> crate::common::RegisterFieldBool<9, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<9,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Selects the clock source\n1 = DIV1 clock\n0 = DIVN clock"]
    #[inline(always)]
    pub fn spi_clk_sel(
        self,
    ) -> crate::common::RegisterFieldBool<8, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<8,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Enables the clock"]
    #[inline(always)]
    pub fn kbscan_enable(
        self,
    ) -> crate::common::RegisterFieldBool<5, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<5,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Enables the clock"]
    #[inline(always)]
    pub fn ir_clk_enable(
        self,
    ) -> crate::common::RegisterFieldBool<4, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<4,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Enables the clock"]
    #[inline(always)]
    pub fn quad_enable(
        self,
    ) -> crate::common::RegisterFieldBool<3, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<3,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Enables the clock"]
    #[inline(always)]
    pub fn i2c_enable(
        self,
    ) -> crate::common::RegisterFieldBool<2, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<2,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Enables the clock"]
    #[inline(always)]
    pub fn spi_enable(
        self,
    ) -> crate::common::RegisterFieldBool<1, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<1,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Enables the clock"]
    #[inline(always)]
    pub fn uart_enable(
        self,
    ) -> crate::common::RegisterFieldBool<0, 1, 0, ClkPerReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<0,1,0,ClkPerReg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for ClkPerReg {
    #[inline(always)]
    fn default() -> ClkPerReg {
        <crate::RegValueT<ClkPerReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct PcmDivReg_SPEC;
impl crate::sealed::RegSpec for PcmDivReg_SPEC {
    type DataType = u16;
}

#[doc = "PCM divider and enables"]
pub type PcmDivReg = crate::RegValueT<PcmDivReg_SPEC>;

impl PcmDivReg {
    #[doc = "Selects the clock source\n1 = DIV1 clock\n0 = DIVN clock"]
    #[inline(always)]
    pub fn pcm_src_sel(
        self,
    ) -> crate::common::RegisterFieldBool<13, 1, 0, PcmDivReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<13,1,0,PcmDivReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Enable for the internally generated PCM clock\nThe PCM_DIV must be set before or together with CLK_PCM_EN."]
    #[inline(always)]
    pub fn clk_pcm_en(
        self,
    ) -> crate::common::RegisterFieldBool<12, 1, 0, PcmDivReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<12,1,0,PcmDivReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "PCM clock divider"]
    #[inline(always)]
    pub fn pcm_div(
        self,
    ) -> crate::common::RegisterField<0, 0xfff, 1, 0, u16, u16, PcmDivReg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0xfff,1,0,u16,u16,PcmDivReg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for PcmDivReg {
    #[inline(always)]
    fn default() -> PcmDivReg {
        <crate::RegValueT<PcmDivReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct PcmFdivReg_SPEC;
impl crate::sealed::RegSpec for PcmFdivReg_SPEC {
    type DataType = u16;
}

#[doc = "PCM fractional division register"]
pub type PcmFdivReg = crate::RegValueT<PcmFdivReg_SPEC>;

impl PcmFdivReg {
    #[doc = "These bits define the fractional division part of the PCM clock. The left most \'1\' defines the denominator, the number of \'1\' bits define the numerator. E.g.\n0x0110 means 2/9, with a distribution of 1.0001.0000\n0xfeee means 13/16, with a distribution of 1111.1110.1110.1110"]
    #[inline(always)]
    pub fn pcm_fdiv(
        self,
    ) -> crate::common::RegisterField<0, 0xffff, 1, 0, u16, u16, PcmFdivReg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0xffff,1,0,u16,u16,PcmFdivReg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for PcmFdivReg {
    #[inline(always)]
    fn default() -> PcmFdivReg {
        <crate::RegValueT<PcmFdivReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct PdmDivReg_SPEC;
impl crate::sealed::RegSpec for PdmDivReg_SPEC {
    type DataType = u16;
}

#[doc = "PDM divider and enables"]
pub type PdmDivReg = crate::RegValueT<PdmDivReg_SPEC>;

impl PdmDivReg {
    #[doc = "Master mode selection\n0: slave mode\n1: master mode"]
    #[inline(always)]
    pub fn pdm_master_mode(
        self,
    ) -> crate::common::RegisterFieldBool<9, 1, 0, PdmDivReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<9,1,0,PdmDivReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Enable for the internally generated PDM clock\nThe PDM_DIV must be set before or together with CLK_PDM_EN."]
    #[inline(always)]
    pub fn clk_pdm_en(
        self,
    ) -> crate::common::RegisterFieldBool<8, 1, 0, PdmDivReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<8,1,0,PdmDivReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "PDM clock divider"]
    #[inline(always)]
    pub fn pdm_div(
        self,
    ) -> crate::common::RegisterField<0, 0xff, 1, 0, u8, u8, PdmDivReg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0xff,1,0,u8,u8,PdmDivReg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for PdmDivReg {
    #[inline(always)]
    fn default() -> PdmDivReg {
        <crate::RegValueT<PdmDivReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct SrcDivReg_SPEC;
impl crate::sealed::RegSpec for SrcDivReg_SPEC {
    type DataType = u16;
}

#[doc = "SRC divider and enables"]
pub type SrcDivReg = crate::RegValueT<SrcDivReg_SPEC>;

impl SrcDivReg {
    #[doc = "Enable for the internally generated SRC clock\nThe SRC_DIV must be set before or together with CLK_SRC_EN."]
    #[inline(always)]
    pub fn clk_src_en(
        self,
    ) -> crate::common::RegisterFieldBool<8, 1, 0, SrcDivReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<8,1,0,SrcDivReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "SRC clock divider"]
    #[inline(always)]
    pub fn src_div(
        self,
    ) -> crate::common::RegisterField<0, 0xff, 1, 0, u8, u8, SrcDivReg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0xff,1,0,u8,u8,SrcDivReg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for SrcDivReg {
    #[inline(always)]
    fn default() -> SrcDivReg {
        <crate::RegValueT<SrcDivReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct UsbpadReg_SPEC;
impl crate::sealed::RegSpec for UsbpadReg_SPEC {
    type DataType = u16;
}

#[doc = "USB pads control register"]
pub type UsbpadReg = crate::RegValueT<UsbpadReg_SPEC>;

impl UsbpadReg {
    #[doc = "0: Pull up resistor SW2 is controlled by the USB controller. It is off when the USB is not enabled.\n1: Force the pull up resistor on USBP to be 2.3Kohm"]
    #[inline(always)]
    pub fn usbphy_force_sw2_on(
        self,
    ) -> crate::common::RegisterFieldBool<2, 1, 0, UsbpadReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<2,1,0,UsbpadReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "0: Pull up resistor SW1 is controlled by the USB controller. It is off when the USB is not enabled.\n1: Force the pull up resistor on USBP to be switched off."]
    #[inline(always)]
    pub fn usbphy_force_sw1_off(
        self,
    ) -> crate::common::RegisterFieldBool<1, 1, 0, UsbpadReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<1,1,0,UsbpadReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "0: The power for the USB PHY and USB pads is switched on when the USB is enabled.\n1: The power for the USB PHY and USB pads is forced on."]
    #[inline(always)]
    pub fn usbpad_en(
        self,
    ) -> crate::common::RegisterFieldBool<0, 1, 0, UsbpadReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<0,1,0,UsbpadReg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for UsbpadReg {
    #[inline(always)]
    fn default() -> UsbpadReg {
        <crate::RegValueT<UsbpadReg_SPEC> as RegisterValue<_>>::new(0)
    }
}