#[doc = r" Value read from the register"]
pub struct R {
bits: u32,
}
#[doc = r" Value to write to the register"]
pub struct W {
bits: u32,
}
impl super::RECHARGESTAT {
#[doc = r" Modifies the contents of the register"]
#[inline]
pub fn modify<F>(&self, f: F)
where
for<'w> F: FnOnce(&R, &'w mut W) -> &'w mut W,
{
let bits = self.register.get();
let r = R { bits: bits };
let mut w = W { bits: bits };
f(&r, &mut w);
self.register.set(w.bits);
}
#[doc = r" Reads the contents of the register"]
#[inline]
pub fn read(&self) -> R {
R { bits: self.register.get() }
}
#[doc = r" Writes to the register"]
#[inline]
pub fn write<F>(&self, f: F)
where
F: FnOnce(&mut W) -> &mut W,
{
let mut w = W::reset_value();
f(&mut w);
self.register.set(w.bits);
}
#[doc = r" Writes the reset value to the register"]
#[inline]
pub fn reset(&self) {
self.write(|w| w)
}
}
#[doc = r" Value of the field"]
pub struct RESERVED20R {
bits: u16,
}
impl RESERVED20R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u16 {
self.bits
}
}
#[doc = r" Value of the field"]
pub struct VDDR_SMPLSR {
bits: u8,
}
impl VDDR_SMPLSR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u8 {
self.bits
}
}
#[doc = r" Value of the field"]
pub struct MAX_USED_PERR {
bits: u16,
}
impl MAX_USED_PERR {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bits(&self) -> u16 {
self.bits
}
}
#[doc = r" Proxy"]
pub struct _MAX_USED_PERW<'a> {
w: &'a mut W,
}
impl<'a> _MAX_USED_PERW<'a> {
#[doc = r" Writes raw bits to the field"]
#[inline]
pub unsafe fn bits(self, value: u16) -> &'a mut W {
const MASK: u16 = 65535;
const OFFSET: u8 = 0;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
impl R {
#[doc = r" Value of the register as raw bits"]
#[inline]
pub fn bits(&self) -> u32 {
self.bits
}
#[doc = "Bits 20:31 - Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline]
pub fn reserved20(&self) -> RESERVED20R {
let bits = {
const MASK: u16 = 4095;
const OFFSET: u8 = 20;
((self.bits >> OFFSET) & MASK as u32) as u16
};
RESERVED20R { bits }
}
#[doc = "Bits 16:19 - The last 4 VDDR samples, bit 0 being the newest. The register is being updated in every recharge period with a shift left, and bit 0 is updated with the last VDDR sample, ie a 1 is shiftet in in case VDDR > VDDR_threshold just before recharge starts. Otherwise a 0 will be shifted in."]
#[inline]
pub fn vddr_smpls(&self) -> VDDR_SMPLSR {
let bits = {
const MASK: u8 = 15;
const OFFSET: u8 = 16;
((self.bits >> OFFSET) & MASK as u32) as u8
};
VDDR_SMPLSR { bits }
}
#[doc = "Bits 0:15 - The maximum value of recharge period seen with VDDR>threshold. The VDDR voltage is compared against the threshold voltage at just before each recharge. If VDDR is above threshold, MAX_USED_PER is updated with max ( current recharge peride; MAX_USED_PER ) This way MAX_USED_PER can track the recharge period where VDDR is decharged to the threshold value. We can therefore use the value as an indication of the leakage current during recharge. This bitfield is cleared to 0 when writing this register."]
#[inline]
pub fn max_used_per(&self) -> MAX_USED_PERR {
let bits = {
const MASK: u16 = 65535;
const OFFSET: u8 = 0;
((self.bits >> OFFSET) & MASK as u32) as u16
};
MAX_USED_PERR { bits }
}
}
impl W {
#[doc = r" Reset value of the register"]
#[inline]
pub fn reset_value() -> W {
W { bits: 0 }
}
#[doc = r" Writes raw bits to the register"]
#[inline]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
#[doc = "Bits 0:15 - The maximum value of recharge period seen with VDDR>threshold. The VDDR voltage is compared against the threshold voltage at just before each recharge. If VDDR is above threshold, MAX_USED_PER is updated with max ( current recharge peride; MAX_USED_PER ) This way MAX_USED_PER can track the recharge period where VDDR is decharged to the threshold value. We can therefore use the value as an indication of the leakage current during recharge. This bitfield is cleared to 0 when writing this register."]
#[inline]
pub fn max_used_per(&mut self) -> _MAX_USED_PERW {
_MAX_USED_PERW { w: self }
}
}