#[doc = "Reader of register IRQCLR"]
pub type R = crate::R<u32, super::IRQCLR>;
#[doc = "Writer for register IRQCLR"]
pub type W = crate::W<u32, super::IRQCLR>;
#[doc = "Register IRQCLR `reset()`'s with value 0"]
impl crate::ResetValue for super::IRQCLR {
type Type = u32;
#[inline(always)]
fn reset_value() -> Self::Type {
0
}
}
#[doc = "Reader of field `DMA_BUS_ERR`"]
pub type DMA_BUS_ERR_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `DMA_BUS_ERR`"]
pub struct DMA_BUS_ERR_W<'a> {
w: &'a mut W,
}
impl<'a> DMA_BUS_ERR_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 31)) | (((value as u32) & 0x01) << 31);
self.w
}
}
#[doc = "Reader of field `KEY_ST_WR_ERR`"]
pub type KEY_ST_WR_ERR_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `KEY_ST_WR_ERR`"]
pub struct KEY_ST_WR_ERR_W<'a> {
w: &'a mut W,
}
impl<'a> KEY_ST_WR_ERR_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 30)) | (((value as u32) & 0x01) << 30);
self.w
}
}
#[doc = "Reader of field `KEY_ST_RD_ERR`"]
pub type KEY_ST_RD_ERR_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `KEY_ST_RD_ERR`"]
pub struct KEY_ST_RD_ERR_W<'a> {
w: &'a mut W,
}
impl<'a> KEY_ST_RD_ERR_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 29)) | (((value as u32) & 0x01) << 29);
self.w
}
}
#[doc = "Reader of field `RESERVED2`"]
pub type RESERVED2_R = crate::R<u32, u32>;
#[doc = "Write proxy for field `RESERVED2`"]
pub struct RESERVED2_W<'a> {
w: &'a mut W,
}
impl<'a> RESERVED2_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u32) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x07ff_ffff << 2)) | (((value as u32) & 0x07ff_ffff) << 2);
self.w
}
}
#[doc = "Reader of field `DMA_IN_DONE`"]
pub type DMA_IN_DONE_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `DMA_IN_DONE`"]
pub struct DMA_IN_DONE_W<'a> {
w: &'a mut W,
}
impl<'a> DMA_IN_DONE_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 1)) | (((value as u32) & 0x01) << 1);
self.w
}
}
#[doc = "Reader of field `RESULT_AVAIL`"]
pub type RESULT_AVAIL_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `RESULT_AVAIL`"]
pub struct RESULT_AVAIL_W<'a> {
w: &'a mut W,
}
impl<'a> RESULT_AVAIL_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !0x01) | ((value as u32) & 0x01);
self.w
}
}
impl R {
#[doc = "Bit 31 - 31:31\\]
If 1 is written to this bit, the DMA bus error status is cleared. Writing 0 has no effect."]
#[inline(always)]
pub fn dma_bus_err(&self) -> DMA_BUS_ERR_R {
DMA_BUS_ERR_R::new(((self.bits >> 31) & 0x01) != 0)
}
#[doc = "Bit 30 - 30:30\\]
If 1 is written to this bit, the key store write error status is cleared. Writing 0 has no effect."]
#[inline(always)]
pub fn key_st_wr_err(&self) -> KEY_ST_WR_ERR_R {
KEY_ST_WR_ERR_R::new(((self.bits >> 30) & 0x01) != 0)
}
#[doc = "Bit 29 - 29:29\\]
If 1 is written to this bit, the key store read error status is cleared. Writing 0 has no effect."]
#[inline(always)]
pub fn key_st_rd_err(&self) -> KEY_ST_RD_ERR_R {
KEY_ST_RD_ERR_R::new(((self.bits >> 29) & 0x01) != 0)
}
#[doc = "Bits 2:28 - 28:2\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved2(&self) -> RESERVED2_R {
RESERVED2_R::new(((self.bits >> 2) & 0x07ff_ffff) as u32)
}
#[doc = "Bit 1 - 1:1\\]
If 1 is written to this bit, the DMA in done (irq_dma_in_done) interrupt output is cleared. Writing 0 has no effect. Note that clearing an interrupt makes sense only if the interrupt output is programmed as level (refer to IRQTYPE)."]
#[inline(always)]
pub fn dma_in_done(&self) -> DMA_IN_DONE_R {
DMA_IN_DONE_R::new(((self.bits >> 1) & 0x01) != 0)
}
#[doc = "Bit 0 - 0:0\\]
If 1 is written to this bit, the result available (irq_result_av) interrupt output is cleared. Writing 0 has no effect. Note that clearing an interrupt makes sense only if the interrupt output is programmed as level (refer to IRQTYPE)."]
#[inline(always)]
pub fn result_avail(&self) -> RESULT_AVAIL_R {
RESULT_AVAIL_R::new((self.bits & 0x01) != 0)
}
}
impl W {
#[doc = "Bit 31 - 31:31\\]
If 1 is written to this bit, the DMA bus error status is cleared. Writing 0 has no effect."]
#[inline(always)]
pub fn dma_bus_err(&mut self) -> DMA_BUS_ERR_W {
DMA_BUS_ERR_W { w: self }
}
#[doc = "Bit 30 - 30:30\\]
If 1 is written to this bit, the key store write error status is cleared. Writing 0 has no effect."]
#[inline(always)]
pub fn key_st_wr_err(&mut self) -> KEY_ST_WR_ERR_W {
KEY_ST_WR_ERR_W { w: self }
}
#[doc = "Bit 29 - 29:29\\]
If 1 is written to this bit, the key store read error status is cleared. Writing 0 has no effect."]
#[inline(always)]
pub fn key_st_rd_err(&mut self) -> KEY_ST_RD_ERR_W {
KEY_ST_RD_ERR_W { w: self }
}
#[doc = "Bits 2:28 - 28:2\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved2(&mut self) -> RESERVED2_W {
RESERVED2_W { w: self }
}
#[doc = "Bit 1 - 1:1\\]
If 1 is written to this bit, the DMA in done (irq_dma_in_done) interrupt output is cleared. Writing 0 has no effect. Note that clearing an interrupt makes sense only if the interrupt output is programmed as level (refer to IRQTYPE)."]
#[inline(always)]
pub fn dma_in_done(&mut self) -> DMA_IN_DONE_W {
DMA_IN_DONE_W { w: self }
}
#[doc = "Bit 0 - 0:0\\]
If 1 is written to this bit, the result available (irq_result_av) interrupt output is cleared. Writing 0 has no effect. Note that clearing an interrupt makes sense only if the interrupt output is programmed as level (refer to IRQTYPE)."]
#[inline(always)]
pub fn result_avail(&mut self) -> RESULT_AVAIL_W {
RESULT_AVAIL_W { w: self }
}
}