#[doc = "Register `CFG_DATA_LL11` reader"]
pub type R = crate::R<CfgDataLl11Spec>;
#[doc = "Register `CFG_DATA_LL11` writer"]
pub type W = crate::W<CfgDataLl11Spec>;
#[doc = "Field `LL11_VALID` reader - 0:0\\]
0 : Linklist entry is invalid 1 : Linklist entry is valid"]
pub type Ll11ValidR = crate::BitReader;
#[doc = "Field `LL11_VALID` writer - 0:0\\]
0 : Linklist entry is invalid 1 : Linklist entry is valid"]
pub type Ll11ValidW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_HE` reader - 1:1\\]
CSI-2 : 0 : Do not send an Hsync End packet after sending this data 1 : Send an Hsync End Packet after sending this data LVDS : 0 : Entry is not the last data of LVDS Frame 1 : Entry is the last data in the LVDS Frame"]
pub type Ll11HeR = crate::BitReader;
#[doc = "Field `LL11_HE` writer - 1:1\\]
CSI-2 : 0 : Do not send an Hsync End packet after sending this data 1 : Send an Hsync End Packet after sending this data LVDS : 0 : Entry is not the last data of LVDS Frame 1 : Entry is the last data in the LVDS Frame"]
pub type Ll11HeW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_HS` reader - 2:2\\]
CSI-2 : 0 : Do not send an Hsync Start packet before sending this data 1 : Send an Hsync Start Packet before sending this data LVDS : 0 : Entry is not the first data of LVDS Frame 1 : Entry is the first data in the LVDS Frame"]
pub type Ll11HsR = crate::BitReader;
#[doc = "Field `LL11_HS` writer - 2:2\\]
CSI-2 : 0 : Do not send an Hsync Start packet before sending this data 1 : Send an Hsync Start Packet before sending this data LVDS : 0 : Entry is not the first data of LVDS Frame 1 : Entry is the first data in the LVDS Frame"]
pub type Ll11HsW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_VCNUM` reader - 4:3\\]
CSI-2 : Configure the Virtual Channel Number for the Long Packet over which this data is sent"]
pub type Ll11VcnumR = crate::FieldReader;
#[doc = "Field `LL11_VCNUM` writer - 4:3\\]
CSI-2 : Configure the Virtual Channel Number for the Long Packet over which this data is sent"]
pub type Ll11VcnumW<'a, REG> = crate::FieldWriter<'a, REG, 2>;
#[doc = "Field `LL11_FMT` reader - 6:5\\]
Specify the LVDS/CSI2 output format. 00 - 16bit 01 - 14-bit 10 - 12-bit"]
pub type Ll11FmtR = crate::FieldReader;
#[doc = "Field `LL11_FMT` writer - 6:5\\]
Specify the LVDS/CSI2 output format. 00 - 16bit 01 - 14-bit 10 - 12-bit"]
pub type Ll11FmtW<'a, REG> = crate::FieldWriter<'a, REG, 2>;
#[doc = "Field `LL11_FMT_MAP` reader - 7:7\\]
LVDS only : 0 : Choose CFG_LVDS_MAPPING_LANEx_FMT_0_y 1 : Choose CFG_LVDS_MAPPING_LANEx_FMT_1_y"]
pub type Ll11FmtMapR = crate::BitReader;
#[doc = "Field `LL11_FMT_MAP` writer - 7:7\\]
LVDS only : 0 : Choose CFG_LVDS_MAPPING_LANEx_FMT_0_y 1 : Choose CFG_LVDS_MAPPING_LANEx_FMT_1_y"]
pub type Ll11FmtMapW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_FMT_IN` reader - 8:8\\]
0 : The incoming data sources for this Linklist is aligned to 128-bit 1 : The incoming data sources for this Linklist is aligned to 96-bit"]
pub type Ll11FmtInR = crate::BitReader;
#[doc = "Field `LL11_FMT_IN` writer - 8:8\\]
0 : The incoming data sources for this Linklist is aligned to 128-bit 1 : The incoming data sources for this Linklist is aligned to 96-bit"]
pub type Ll11FmtInW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_SIZE` reader - 22:9\\]
Configure the Size of the data in terms of the numer of samples (not in terms of number of bytes). Sample refers to a 16 bit CBUFF Unit"]
pub type Ll11SizeR = crate::FieldReader<u16>;
#[doc = "Field `LL11_SIZE` writer - 22:9\\]
Configure the Size of the data in terms of the numer of samples (not in terms of number of bytes). Sample refers to a 16 bit CBUFF Unit"]
pub type Ll11SizeW<'a, REG> = crate::FieldWriter<'a, REG, 14, u16>;
#[doc = "Field `LL11_BITPOS_SEL` reader - 25:23\\]
TI Internal Feature. Reserved for future use to select which of the 12-bits or 14-bits to be picked up from 16-bit CBUFF unit"]
pub type Ll11BitposSelR = crate::FieldReader;
#[doc = "Field `LL11_BITPOS_SEL` writer - 25:23\\]
TI Internal Feature. Reserved for future use to select which of the 12-bits or 14-bits to be picked up from 16-bit CBUFF unit"]
pub type Ll11BitposSelW<'a, REG> = crate::FieldWriter<'a, REG, 3>;
#[doc = "Field `LL11_WAITFOR_PKTSENT` reader - 26:26\\]
TI Internal Feature Reserved for furture debug enhancement 1 : Wait for packet sent signal ack from CSI2 to move forward 0 : Do not wait for packet sent"]
pub type Ll11WaitforPktsentR = crate::BitReader;
#[doc = "Field `LL11_WAITFOR_PKTSENT` writer - 26:26\\]
TI Internal Feature Reserved for furture debug enhancement 1 : Wait for packet sent signal ack from CSI2 to move forward 0 : Do not wait for packet sent"]
pub type Ll11WaitforPktsentW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_LPHDR_EN` reader - 27:27\\]
CSI2 Programming : 1 : Entry is start of a new CSI-2 packet. Send the LP Payload Header before sending data corresponind to this Linklist 0 : Link list is not the start of a Long packet but part of previous packet and hence directly send data LVDS Programming : 1 : Entry is start of a new LVDS Frame 0 : Entry is not the start of the new LVDS Frame"]
pub type Ll11LphdrEnR = crate::BitReader;
#[doc = "Field `LL11_LPHDR_EN` writer - 27:27\\]
CSI2 Programming : 1 : Entry is start of a new CSI-2 packet. Send the LP Payload Header before sending data corresponind to this Linklist 0 : Link list is not the start of a Long packet but part of previous packet and hence directly send data LVDS Programming : 1 : Entry is start of a new LVDS Frame 0 : Entry is not the start of the new LVDS Frame"]
pub type Ll11LphdrEnW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_CRC_EN` reader - 28:28\\]
0 : CRC is disbaled 1 : This linklist corresponds to ADC Buffer data. Enable the CRC check from ADC Buffer to CBUFF"]
pub type Ll11CrcEnR = crate::BitReader;
#[doc = "Field `LL11_CRC_EN` writer - 28:28\\]
0 : CRC is disbaled 1 : This linklist corresponds to ADC Buffer data. Enable the CRC check from ADC Buffer to CBUFF"]
pub type Ll11CrcEnW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_SHORT_PKT_DELAY_EN` reader - 29:29\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
pub type Ll11ShortPktDelayEnR = crate::BitReader;
#[doc = "Field `LL11_SHORT_PKT_DELAY_EN` writer - 29:29\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
pub type Ll11ShortPktDelayEnW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_LONG_PKT_DELAY_EN` reader - 30:30\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
pub type Ll11LongPktDelayEnR = crate::BitReader;
#[doc = "Field `LL11_LONG_PKT_DELAY_EN` writer - 30:30\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
pub type Ll11LongPktDelayEnW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LL11_DATA_WR_DELAY_EN` reader - 31:31\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
pub type Ll11DataWrDelayEnR = crate::BitReader;
#[doc = "Field `LL11_DATA_WR_DELAY_EN` writer - 31:31\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
pub type Ll11DataWrDelayEnW<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Bit 0 - 0:0\\]
0 : Linklist entry is invalid 1 : Linklist entry is valid"]
#[inline(always)]
pub fn ll11_valid(&self) -> Ll11ValidR {
Ll11ValidR::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - 1:1\\]
CSI-2 : 0 : Do not send an Hsync End packet after sending this data 1 : Send an Hsync End Packet after sending this data LVDS : 0 : Entry is not the last data of LVDS Frame 1 : Entry is the last data in the LVDS Frame"]
#[inline(always)]
pub fn ll11_he(&self) -> Ll11HeR {
Ll11HeR::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - 2:2\\]
CSI-2 : 0 : Do not send an Hsync Start packet before sending this data 1 : Send an Hsync Start Packet before sending this data LVDS : 0 : Entry is not the first data of LVDS Frame 1 : Entry is the first data in the LVDS Frame"]
#[inline(always)]
pub fn ll11_hs(&self) -> Ll11HsR {
Ll11HsR::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bits 3:4 - 4:3\\]
CSI-2 : Configure the Virtual Channel Number for the Long Packet over which this data is sent"]
#[inline(always)]
pub fn ll11_vcnum(&self) -> Ll11VcnumR {
Ll11VcnumR::new(((self.bits >> 3) & 3) as u8)
}
#[doc = "Bits 5:6 - 6:5\\]
Specify the LVDS/CSI2 output format. 00 - 16bit 01 - 14-bit 10 - 12-bit"]
#[inline(always)]
pub fn ll11_fmt(&self) -> Ll11FmtR {
Ll11FmtR::new(((self.bits >> 5) & 3) as u8)
}
#[doc = "Bit 7 - 7:7\\]
LVDS only : 0 : Choose CFG_LVDS_MAPPING_LANEx_FMT_0_y 1 : Choose CFG_LVDS_MAPPING_LANEx_FMT_1_y"]
#[inline(always)]
pub fn ll11_fmt_map(&self) -> Ll11FmtMapR {
Ll11FmtMapR::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - 8:8\\]
0 : The incoming data sources for this Linklist is aligned to 128-bit 1 : The incoming data sources for this Linklist is aligned to 96-bit"]
#[inline(always)]
pub fn ll11_fmt_in(&self) -> Ll11FmtInR {
Ll11FmtInR::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bits 9:22 - 22:9\\]
Configure the Size of the data in terms of the numer of samples (not in terms of number of bytes). Sample refers to a 16 bit CBUFF Unit"]
#[inline(always)]
pub fn ll11_size(&self) -> Ll11SizeR {
Ll11SizeR::new(((self.bits >> 9) & 0x3fff) as u16)
}
#[doc = "Bits 23:25 - 25:23\\]
TI Internal Feature. Reserved for future use to select which of the 12-bits or 14-bits to be picked up from 16-bit CBUFF unit"]
#[inline(always)]
pub fn ll11_bitpos_sel(&self) -> Ll11BitposSelR {
Ll11BitposSelR::new(((self.bits >> 23) & 7) as u8)
}
#[doc = "Bit 26 - 26:26\\]
TI Internal Feature Reserved for furture debug enhancement 1 : Wait for packet sent signal ack from CSI2 to move forward 0 : Do not wait for packet sent"]
#[inline(always)]
pub fn ll11_waitfor_pktsent(&self) -> Ll11WaitforPktsentR {
Ll11WaitforPktsentR::new(((self.bits >> 26) & 1) != 0)
}
#[doc = "Bit 27 - 27:27\\]
CSI2 Programming : 1 : Entry is start of a new CSI-2 packet. Send the LP Payload Header before sending data corresponind to this Linklist 0 : Link list is not the start of a Long packet but part of previous packet and hence directly send data LVDS Programming : 1 : Entry is start of a new LVDS Frame 0 : Entry is not the start of the new LVDS Frame"]
#[inline(always)]
pub fn ll11_lphdr_en(&self) -> Ll11LphdrEnR {
Ll11LphdrEnR::new(((self.bits >> 27) & 1) != 0)
}
#[doc = "Bit 28 - 28:28\\]
0 : CRC is disbaled 1 : This linklist corresponds to ADC Buffer data. Enable the CRC check from ADC Buffer to CBUFF"]
#[inline(always)]
pub fn ll11_crc_en(&self) -> Ll11CrcEnR {
Ll11CrcEnR::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29 - 29:29\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
#[inline(always)]
pub fn ll11_short_pkt_delay_en(&self) -> Ll11ShortPktDelayEnR {
Ll11ShortPktDelayEnR::new(((self.bits >> 29) & 1) != 0)
}
#[doc = "Bit 30 - 30:30\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
#[inline(always)]
pub fn ll11_long_pkt_delay_en(&self) -> Ll11LongPktDelayEnR {
Ll11LongPktDelayEnR::new(((self.bits >> 30) & 1) != 0)
}
#[doc = "Bit 31 - 31:31\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
#[inline(always)]
pub fn ll11_data_wr_delay_en(&self) -> Ll11DataWrDelayEnR {
Ll11DataWrDelayEnR::new(((self.bits >> 31) & 1) != 0)
}
}
impl W {
#[doc = "Bit 0 - 0:0\\]
0 : Linklist entry is invalid 1 : Linklist entry is valid"]
#[inline(always)]
#[must_use]
pub fn ll11_valid(&mut self) -> Ll11ValidW<CfgDataLl11Spec> {
Ll11ValidW::new(self, 0)
}
#[doc = "Bit 1 - 1:1\\]
CSI-2 : 0 : Do not send an Hsync End packet after sending this data 1 : Send an Hsync End Packet after sending this data LVDS : 0 : Entry is not the last data of LVDS Frame 1 : Entry is the last data in the LVDS Frame"]
#[inline(always)]
#[must_use]
pub fn ll11_he(&mut self) -> Ll11HeW<CfgDataLl11Spec> {
Ll11HeW::new(self, 1)
}
#[doc = "Bit 2 - 2:2\\]
CSI-2 : 0 : Do not send an Hsync Start packet before sending this data 1 : Send an Hsync Start Packet before sending this data LVDS : 0 : Entry is not the first data of LVDS Frame 1 : Entry is the first data in the LVDS Frame"]
#[inline(always)]
#[must_use]
pub fn ll11_hs(&mut self) -> Ll11HsW<CfgDataLl11Spec> {
Ll11HsW::new(self, 2)
}
#[doc = "Bits 3:4 - 4:3\\]
CSI-2 : Configure the Virtual Channel Number for the Long Packet over which this data is sent"]
#[inline(always)]
#[must_use]
pub fn ll11_vcnum(&mut self) -> Ll11VcnumW<CfgDataLl11Spec> {
Ll11VcnumW::new(self, 3)
}
#[doc = "Bits 5:6 - 6:5\\]
Specify the LVDS/CSI2 output format. 00 - 16bit 01 - 14-bit 10 - 12-bit"]
#[inline(always)]
#[must_use]
pub fn ll11_fmt(&mut self) -> Ll11FmtW<CfgDataLl11Spec> {
Ll11FmtW::new(self, 5)
}
#[doc = "Bit 7 - 7:7\\]
LVDS only : 0 : Choose CFG_LVDS_MAPPING_LANEx_FMT_0_y 1 : Choose CFG_LVDS_MAPPING_LANEx_FMT_1_y"]
#[inline(always)]
#[must_use]
pub fn ll11_fmt_map(&mut self) -> Ll11FmtMapW<CfgDataLl11Spec> {
Ll11FmtMapW::new(self, 7)
}
#[doc = "Bit 8 - 8:8\\]
0 : The incoming data sources for this Linklist is aligned to 128-bit 1 : The incoming data sources for this Linklist is aligned to 96-bit"]
#[inline(always)]
#[must_use]
pub fn ll11_fmt_in(&mut self) -> Ll11FmtInW<CfgDataLl11Spec> {
Ll11FmtInW::new(self, 8)
}
#[doc = "Bits 9:22 - 22:9\\]
Configure the Size of the data in terms of the numer of samples (not in terms of number of bytes). Sample refers to a 16 bit CBUFF Unit"]
#[inline(always)]
#[must_use]
pub fn ll11_size(&mut self) -> Ll11SizeW<CfgDataLl11Spec> {
Ll11SizeW::new(self, 9)
}
#[doc = "Bits 23:25 - 25:23\\]
TI Internal Feature. Reserved for future use to select which of the 12-bits or 14-bits to be picked up from 16-bit CBUFF unit"]
#[inline(always)]
#[must_use]
pub fn ll11_bitpos_sel(&mut self) -> Ll11BitposSelW<CfgDataLl11Spec> {
Ll11BitposSelW::new(self, 23)
}
#[doc = "Bit 26 - 26:26\\]
TI Internal Feature Reserved for furture debug enhancement 1 : Wait for packet sent signal ack from CSI2 to move forward 0 : Do not wait for packet sent"]
#[inline(always)]
#[must_use]
pub fn ll11_waitfor_pktsent(&mut self) -> Ll11WaitforPktsentW<CfgDataLl11Spec> {
Ll11WaitforPktsentW::new(self, 26)
}
#[doc = "Bit 27 - 27:27\\]
CSI2 Programming : 1 : Entry is start of a new CSI-2 packet. Send the LP Payload Header before sending data corresponind to this Linklist 0 : Link list is not the start of a Long packet but part of previous packet and hence directly send data LVDS Programming : 1 : Entry is start of a new LVDS Frame 0 : Entry is not the start of the new LVDS Frame"]
#[inline(always)]
#[must_use]
pub fn ll11_lphdr_en(&mut self) -> Ll11LphdrEnW<CfgDataLl11Spec> {
Ll11LphdrEnW::new(self, 27)
}
#[doc = "Bit 28 - 28:28\\]
0 : CRC is disbaled 1 : This linklist corresponds to ADC Buffer data. Enable the CRC check from ADC Buffer to CBUFF"]
#[inline(always)]
#[must_use]
pub fn ll11_crc_en(&mut self) -> Ll11CrcEnW<CfgDataLl11Spec> {
Ll11CrcEnW::new(self, 28)
}
#[doc = "Bit 29 - 29:29\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
#[inline(always)]
#[must_use]
pub fn ll11_short_pkt_delay_en(&mut self) -> Ll11ShortPktDelayEnW<CfgDataLl11Spec> {
Ll11ShortPktDelayEnW::new(self, 29)
}
#[doc = "Bit 30 - 30:30\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
#[inline(always)]
#[must_use]
pub fn ll11_long_pkt_delay_en(&mut self) -> Ll11LongPktDelayEnW<CfgDataLl11Spec> {
Ll11LongPktDelayEnW::new(self, 30)
}
#[doc = "Bit 31 - 31:31\\]
TI Internal Feature CSI2 only Programming : Use the Packet Delay configured in CFG_DELAY_CONFIG. This is a Debug feature. Not requred in Programming model"]
#[inline(always)]
#[must_use]
pub fn ll11_data_wr_delay_en(&mut self) -> Ll11DataWrDelayEnW<CfgDataLl11Spec> {
Ll11DataWrDelayEnW::new(self, 31)
}
}
#[doc = "CFG_DATA_LL11\n\nYou can [`read`](crate::Reg::read) this register and get [`cfg_data_ll11::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cfg_data_ll11::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct CfgDataLl11Spec;
impl crate::RegisterSpec for CfgDataLl11Spec {
type Ux = u32;
}
#[doc = "`read()` method returns [`cfg_data_ll11::R`](R) reader structure"]
impl crate::Readable for CfgDataLl11Spec {}
#[doc = "`write(|w| ..)` method takes [`cfg_data_ll11::W`](W) writer structure"]
impl crate::Writable for CfgDataLl11Spec {
type Safety = crate::Unsafe;
const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets CFG_DATA_LL11 to value 0"]
impl crate::Resettable for CfgDataLl11Spec {
const RESET_VALUE: u32 = 0;
}