#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - Control"]
pub ctrl: crate::Reg<ctrl::CTRL_SPEC>,
#[doc = "0x01 - Status A"]
pub statusa: crate::Reg<statusa::STATUSA_SPEC>,
#[doc = "0x02 - Status B"]
pub statusb: crate::Reg<statusb::STATUSB_SPEC>,
_reserved3: [u8; 0x01],
#[doc = "0x04 - Address"]
pub addr: crate::Reg<addr::ADDR_SPEC>,
#[doc = "0x08 - Length"]
pub length: crate::Reg<length::LENGTH_SPEC>,
#[doc = "0x0c - Data"]
pub data: crate::Reg<data::DATA_SPEC>,
#[doc = "0x10..0x18 - Debug Communication Channel n"]
pub dcc: [crate::Reg<dcc::DCC_SPEC>; 2],
#[doc = "0x18 - Device Identification"]
pub did: crate::Reg<did::DID_SPEC>,
_reserved8: [u8; 0x0fe4],
#[doc = "0x1000 - CoreSight ROM Table Entry 0"]
pub entry: crate::Reg<entry::ENTRY_SPEC>,
#[doc = "0x1004 - CoreSight ROM Table Entry 1"]
pub entry1: crate::Reg<entry1::ENTRY1_SPEC>,
#[doc = "0x1008 - CoreSight ROM Table End"]
pub end: crate::Reg<end::END_SPEC>,
_reserved11: [u8; 0x0fc0],
#[doc = "0x1fcc - CoreSight ROM Table Memory Type"]
pub memtype: crate::Reg<memtype::MEMTYPE_SPEC>,
#[doc = "0x1fd0 - Peripheral Identification 4"]
pub pid4: crate::Reg<pid4::PID4_SPEC>,
_reserved13: [u8; 0x0c],
#[doc = "0x1fe0 - Peripheral Identification 0"]
pub pid0: crate::Reg<pid0::PID0_SPEC>,
#[doc = "0x1fe4 - Peripheral Identification 1"]
pub pid1: crate::Reg<pid1::PID1_SPEC>,
#[doc = "0x1fe8 - Peripheral Identification 2"]
pub pid2: crate::Reg<pid2::PID2_SPEC>,
#[doc = "0x1fec - Peripheral Identification 3"]
pub pid3: crate::Reg<pid3::PID3_SPEC>,
#[doc = "0x1ff0 - Component Identification 0"]
pub cid0: crate::Reg<cid0::CID0_SPEC>,
#[doc = "0x1ff4 - Component Identification 1"]
pub cid1: crate::Reg<cid1::CID1_SPEC>,
#[doc = "0x1ff8 - Component Identification 2"]
pub cid2: crate::Reg<cid2::CID2_SPEC>,
#[doc = "0x1ffc - Component Identification 3"]
pub cid3: crate::Reg<cid3::CID3_SPEC>,
}
#[doc = "CTRL register accessor: an alias for `Reg<CTRL_SPEC>`"]
pub type CTRL = crate::Reg<ctrl::CTRL_SPEC>;
#[doc = "Control"]
pub mod ctrl;
#[doc = "STATUSA register accessor: an alias for `Reg<STATUSA_SPEC>`"]
pub type STATUSA = crate::Reg<statusa::STATUSA_SPEC>;
#[doc = "Status A"]
pub mod statusa;
#[doc = "STATUSB register accessor: an alias for `Reg<STATUSB_SPEC>`"]
pub type STATUSB = crate::Reg<statusb::STATUSB_SPEC>;
#[doc = "Status B"]
pub mod statusb;
#[doc = "ADDR register accessor: an alias for `Reg<ADDR_SPEC>`"]
pub type ADDR = crate::Reg<addr::ADDR_SPEC>;
#[doc = "Address"]
pub mod addr;
#[doc = "LENGTH register accessor: an alias for `Reg<LENGTH_SPEC>`"]
pub type LENGTH = crate::Reg<length::LENGTH_SPEC>;
#[doc = "Length"]
pub mod length;
#[doc = "DATA register accessor: an alias for `Reg<DATA_SPEC>`"]
pub type DATA = crate::Reg<data::DATA_SPEC>;
#[doc = "Data"]
pub mod data;
#[doc = "DCC register accessor: an alias for `Reg<DCC_SPEC>`"]
pub type DCC = crate::Reg<dcc::DCC_SPEC>;
#[doc = "Debug Communication Channel n"]
pub mod dcc;
#[doc = "DID register accessor: an alias for `Reg<DID_SPEC>`"]
pub type DID = crate::Reg<did::DID_SPEC>;
#[doc = "Device Identification"]
pub mod did;
#[doc = "ENTRY register accessor: an alias for `Reg<ENTRY_SPEC>`"]
pub type ENTRY = crate::Reg<entry::ENTRY_SPEC>;
#[doc = "CoreSight ROM Table Entry 0"]
pub mod entry;
#[doc = "ENTRY1 register accessor: an alias for `Reg<ENTRY1_SPEC>`"]
pub type ENTRY1 = crate::Reg<entry1::ENTRY1_SPEC>;
#[doc = "CoreSight ROM Table Entry 1"]
pub mod entry1;
#[doc = "END register accessor: an alias for `Reg<END_SPEC>`"]
pub type END = crate::Reg<end::END_SPEC>;
#[doc = "CoreSight ROM Table End"]
pub mod end;
#[doc = "MEMTYPE register accessor: an alias for `Reg<MEMTYPE_SPEC>`"]
pub type MEMTYPE = crate::Reg<memtype::MEMTYPE_SPEC>;
#[doc = "CoreSight ROM Table Memory Type"]
pub mod memtype;
#[doc = "PID4 register accessor: an alias for `Reg<PID4_SPEC>`"]
pub type PID4 = crate::Reg<pid4::PID4_SPEC>;
#[doc = "Peripheral Identification 4"]
pub mod pid4;
#[doc = "PID0 register accessor: an alias for `Reg<PID0_SPEC>`"]
pub type PID0 = crate::Reg<pid0::PID0_SPEC>;
#[doc = "Peripheral Identification 0"]
pub mod pid0;
#[doc = "PID1 register accessor: an alias for `Reg<PID1_SPEC>`"]
pub type PID1 = crate::Reg<pid1::PID1_SPEC>;
#[doc = "Peripheral Identification 1"]
pub mod pid1;
#[doc = "PID2 register accessor: an alias for `Reg<PID2_SPEC>`"]
pub type PID2 = crate::Reg<pid2::PID2_SPEC>;
#[doc = "Peripheral Identification 2"]
pub mod pid2;
#[doc = "PID3 register accessor: an alias for `Reg<PID3_SPEC>`"]
pub type PID3 = crate::Reg<pid3::PID3_SPEC>;
#[doc = "Peripheral Identification 3"]
pub mod pid3;
#[doc = "CID0 register accessor: an alias for `Reg<CID0_SPEC>`"]
pub type CID0 = crate::Reg<cid0::CID0_SPEC>;
#[doc = "Component Identification 0"]
pub mod cid0;
#[doc = "CID1 register accessor: an alias for `Reg<CID1_SPEC>`"]
pub type CID1 = crate::Reg<cid1::CID1_SPEC>;
#[doc = "Component Identification 1"]
pub mod cid1;
#[doc = "CID2 register accessor: an alias for `Reg<CID2_SPEC>`"]
pub type CID2 = crate::Reg<cid2::CID2_SPEC>;
#[doc = "Component Identification 2"]
pub mod cid2;
#[doc = "CID3 register accessor: an alias for `Reg<CID3_SPEC>`"]
pub type CID3 = crate::Reg<cid3::CID3_SPEC>;
#[doc = "Component Identification 3"]
pub mod cid3;