atsamd21j 0.12.0

Peripheral access API for ATSAMD21J microcontrollers (generated using svd2rust)
Documentation
#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
    #[doc = "0x00 - Control"]
    pub ctrl: crate::Reg<ctrl::CTRL_SPEC>,
    #[doc = "0x02 - CRC Control"]
    pub crcctrl: crate::Reg<crcctrl::CRCCTRL_SPEC>,
    #[doc = "0x04 - CRC Data Input"]
    pub crcdatain: crate::Reg<crcdatain::CRCDATAIN_SPEC>,
    #[doc = "0x08 - CRC Checksum"]
    pub crcchksum: crate::Reg<crcchksum::CRCCHKSUM_SPEC>,
    #[doc = "0x0c - CRC Status"]
    pub crcstatus: crate::Reg<crcstatus::CRCSTATUS_SPEC>,
    #[doc = "0x0d - Debug Control"]
    pub dbgctrl: crate::Reg<dbgctrl::DBGCTRL_SPEC>,
    #[doc = "0x0e - QOS Control"]
    pub qosctrl: crate::Reg<qosctrl::QOSCTRL_SPEC>,
    _reserved7: [u8; 0x01],
    #[doc = "0x10 - Software Trigger Control"]
    pub swtrigctrl: crate::Reg<swtrigctrl::SWTRIGCTRL_SPEC>,
    #[doc = "0x14 - Priority Control 0"]
    pub prictrl0: crate::Reg<prictrl0::PRICTRL0_SPEC>,
    _reserved9: [u8; 0x08],
    #[doc = "0x20 - Interrupt Pending"]
    pub intpend: crate::Reg<intpend::INTPEND_SPEC>,
    _reserved10: [u8; 0x02],
    #[doc = "0x24 - Interrupt Status"]
    pub intstatus: crate::Reg<intstatus::INTSTATUS_SPEC>,
    #[doc = "0x28 - Busy Channels"]
    pub busych: crate::Reg<busych::BUSYCH_SPEC>,
    #[doc = "0x2c - Pending Channels"]
    pub pendch: crate::Reg<pendch::PENDCH_SPEC>,
    #[doc = "0x30 - Active Channel and Levels"]
    pub active: crate::Reg<active::ACTIVE_SPEC>,
    #[doc = "0x34 - Descriptor Memory Section Base Address"]
    pub baseaddr: crate::Reg<baseaddr::BASEADDR_SPEC>,
    #[doc = "0x38 - Write-Back Memory Section Base Address"]
    pub wrbaddr: crate::Reg<wrbaddr::WRBADDR_SPEC>,
    _reserved16: [u8; 0x03],
    #[doc = "0x3f - Channel ID"]
    pub chid: crate::Reg<chid::CHID_SPEC>,
    #[doc = "0x40 - Channel Control A"]
    pub chctrla: crate::Reg<chctrla::CHCTRLA_SPEC>,
    _reserved18: [u8; 0x03],
    #[doc = "0x44 - Channel Control B"]
    pub chctrlb: crate::Reg<chctrlb::CHCTRLB_SPEC>,
    _reserved19: [u8; 0x04],
    #[doc = "0x4c - Channel Interrupt Enable Clear"]
    pub chintenclr: crate::Reg<chintenclr::CHINTENCLR_SPEC>,
    #[doc = "0x4d - Channel Interrupt Enable Set"]
    pub chintenset: crate::Reg<chintenset::CHINTENSET_SPEC>,
    #[doc = "0x4e - Channel Interrupt Flag Status and Clear"]
    pub chintflag: crate::Reg<chintflag::CHINTFLAG_SPEC>,
    #[doc = "0x4f - Channel Status"]
    pub chstatus: crate::Reg<chstatus::CHSTATUS_SPEC>,
}
#[doc = "CTRL register accessor: an alias for `Reg<CTRL_SPEC>`"]
pub type CTRL = crate::Reg<ctrl::CTRL_SPEC>;
#[doc = "Control"]
pub mod ctrl;
#[doc = "CRCCTRL register accessor: an alias for `Reg<CRCCTRL_SPEC>`"]
pub type CRCCTRL = crate::Reg<crcctrl::CRCCTRL_SPEC>;
#[doc = "CRC Control"]
pub mod crcctrl;
#[doc = "CRCDATAIN register accessor: an alias for `Reg<CRCDATAIN_SPEC>`"]
pub type CRCDATAIN = crate::Reg<crcdatain::CRCDATAIN_SPEC>;
#[doc = "CRC Data Input"]
pub mod crcdatain;
#[doc = "CRCCHKSUM register accessor: an alias for `Reg<CRCCHKSUM_SPEC>`"]
pub type CRCCHKSUM = crate::Reg<crcchksum::CRCCHKSUM_SPEC>;
#[doc = "CRC Checksum"]
pub mod crcchksum;
#[doc = "CRCSTATUS register accessor: an alias for `Reg<CRCSTATUS_SPEC>`"]
pub type CRCSTATUS = crate::Reg<crcstatus::CRCSTATUS_SPEC>;
#[doc = "CRC Status"]
pub mod crcstatus;
#[doc = "DBGCTRL register accessor: an alias for `Reg<DBGCTRL_SPEC>`"]
pub type DBGCTRL = crate::Reg<dbgctrl::DBGCTRL_SPEC>;
#[doc = "Debug Control"]
pub mod dbgctrl;
#[doc = "QOSCTRL register accessor: an alias for `Reg<QOSCTRL_SPEC>`"]
pub type QOSCTRL = crate::Reg<qosctrl::QOSCTRL_SPEC>;
#[doc = "QOS Control"]
pub mod qosctrl;
#[doc = "SWTRIGCTRL register accessor: an alias for `Reg<SWTRIGCTRL_SPEC>`"]
pub type SWTRIGCTRL = crate::Reg<swtrigctrl::SWTRIGCTRL_SPEC>;
#[doc = "Software Trigger Control"]
pub mod swtrigctrl;
#[doc = "PRICTRL0 register accessor: an alias for `Reg<PRICTRL0_SPEC>`"]
pub type PRICTRL0 = crate::Reg<prictrl0::PRICTRL0_SPEC>;
#[doc = "Priority Control 0"]
pub mod prictrl0;
#[doc = "INTPEND register accessor: an alias for `Reg<INTPEND_SPEC>`"]
pub type INTPEND = crate::Reg<intpend::INTPEND_SPEC>;
#[doc = "Interrupt Pending"]
pub mod intpend;
#[doc = "INTSTATUS register accessor: an alias for `Reg<INTSTATUS_SPEC>`"]
pub type INTSTATUS = crate::Reg<intstatus::INTSTATUS_SPEC>;
#[doc = "Interrupt Status"]
pub mod intstatus;
#[doc = "BUSYCH register accessor: an alias for `Reg<BUSYCH_SPEC>`"]
pub type BUSYCH = crate::Reg<busych::BUSYCH_SPEC>;
#[doc = "Busy Channels"]
pub mod busych;
#[doc = "PENDCH register accessor: an alias for `Reg<PENDCH_SPEC>`"]
pub type PENDCH = crate::Reg<pendch::PENDCH_SPEC>;
#[doc = "Pending Channels"]
pub mod pendch;
#[doc = "ACTIVE register accessor: an alias for `Reg<ACTIVE_SPEC>`"]
pub type ACTIVE = crate::Reg<active::ACTIVE_SPEC>;
#[doc = "Active Channel and Levels"]
pub mod active;
#[doc = "BASEADDR register accessor: an alias for `Reg<BASEADDR_SPEC>`"]
pub type BASEADDR = crate::Reg<baseaddr::BASEADDR_SPEC>;
#[doc = "Descriptor Memory Section Base Address"]
pub mod baseaddr;
#[doc = "WRBADDR register accessor: an alias for `Reg<WRBADDR_SPEC>`"]
pub type WRBADDR = crate::Reg<wrbaddr::WRBADDR_SPEC>;
#[doc = "Write-Back Memory Section Base Address"]
pub mod wrbaddr;
#[doc = "CHID register accessor: an alias for `Reg<CHID_SPEC>`"]
pub type CHID = crate::Reg<chid::CHID_SPEC>;
#[doc = "Channel ID"]
pub mod chid;
#[doc = "CHCTRLA register accessor: an alias for `Reg<CHCTRLA_SPEC>`"]
pub type CHCTRLA = crate::Reg<chctrla::CHCTRLA_SPEC>;
#[doc = "Channel Control A"]
pub mod chctrla;
#[doc = "CHCTRLB register accessor: an alias for `Reg<CHCTRLB_SPEC>`"]
pub type CHCTRLB = crate::Reg<chctrlb::CHCTRLB_SPEC>;
#[doc = "Channel Control B"]
pub mod chctrlb;
#[doc = "CHINTENCLR register accessor: an alias for `Reg<CHINTENCLR_SPEC>`"]
pub type CHINTENCLR = crate::Reg<chintenclr::CHINTENCLR_SPEC>;
#[doc = "Channel Interrupt Enable Clear"]
pub mod chintenclr;
#[doc = "CHINTENSET register accessor: an alias for `Reg<CHINTENSET_SPEC>`"]
pub type CHINTENSET = crate::Reg<chintenset::CHINTENSET_SPEC>;
#[doc = "Channel Interrupt Enable Set"]
pub mod chintenset;
#[doc = "CHINTFLAG register accessor: an alias for `Reg<CHINTFLAG_SPEC>`"]
pub type CHINTFLAG = crate::Reg<chintflag::CHINTFLAG_SPEC>;
#[doc = "Channel Interrupt Flag Status and Clear"]
pub mod chintflag;
#[doc = "CHSTATUS register accessor: an alias for `Reg<CHSTATUS_SPEC>`"]
pub type CHSTATUS = crate::Reg<chstatus::CHSTATUS_SPEC>;
#[doc = "Channel Status"]
pub mod chstatus;