Struct BorderRadius 

pub struct BorderRadius {
    pub top_left: Val,
    pub top_right: Val,
    pub bottom_left: Val,
    pub bottom_right: Val,
}

Used to add rounded corners to a UI node. You can set a UI node to have uniformly rounded corners or specify different radii for each corner. If a given radius exceeds half the length of the smallest dimension between the node’s height or width, the radius will calculated as half the smallest dimension.

Elliptical nodes are not supported yet. Percentage values are based on the node’s smallest dimension, either width or height.

Example

fn setup_ui(mut commands: Commands) {
    commands.spawn((
        Node {
            width: Val::Px(100.),
            height: Val::Px(100.),
            border: UiRect::all(Val::Px(2.)),
            ..Default::default()
        },
        BackgroundColor(BLUE.into()),
        BorderRadius::new(
            // top left
            Val::Px(10.),
            // top right
            Val::Px(20.),
            // bottom right
            Val::Px(30.),
            // bottom left
            Val::Px(40.),
        ),
    ));
}

https://developer.mozilla.org/en-US/docs/Web/CSS/border-radius

Fields

top_left: Val

top_right: Val

bottom_left: Val

bottom_right: Val

Implementations

impl BorderRadius

pub const DEFAULT: BorderRadius = Self::ZERO

pub const ZERO: BorderRadius

Zero curvature. All the corners will be right-angled.

pub const MAX: BorderRadius

Maximum curvature. The UI Node will take a capsule shape or circular if width and height are equal.

pub const fn all(radius: Val) -> BorderRadius

Set all four corners to the same curvature.

pub const fn new( top_left: Val, top_right: Val, bottom_right: Val, bottom_left: Val, ) -> BorderRadius

pub const fn px( top_left: f32, top_right: f32, bottom_right: f32, bottom_left: f32, ) -> BorderRadius

Sets the radii to logical pixel values.

pub const fn percent( top_left: f32, top_right: f32, bottom_right: f32, bottom_left: f32, ) -> BorderRadius

Sets the radii to percentage values.

pub const fn top_left(radius: Val) -> BorderRadius

Sets the radius for the top left corner. Remaining corners will be right-angled.

pub const fn top_right(radius: Val) -> BorderRadius

Sets the radius for the top right corner. Remaining corners will be right-angled.

pub const fn bottom_right(radius: Val) -> BorderRadius

Sets the radius for the bottom right corner. Remaining corners will be right-angled.

pub const fn bottom_left(radius: Val) -> BorderRadius

Sets the radius for the bottom left corner. Remaining corners will be right-angled.

pub const fn left(radius: Val) -> BorderRadius

Sets the radii for the top left and bottom left corners. Remaining corners will be right-angled.

pub const fn right(radius: Val) -> BorderRadius

Sets the radii for the top right and bottom right corners. Remaining corners will be right-angled.

pub const fn top(radius: Val) -> BorderRadius

Sets the radii for the top left and top right corners. Remaining corners will be right-angled.

pub const fn bottom(radius: Val) -> BorderRadius

Sets the radii for the bottom left and bottom right corners. Remaining corners will be right-angled.

pub const fn with_top_left(self, radius: Val) -> BorderRadius

Returns the BorderRadius with its top_left field set to the given value.

pub const fn with_top_right(self, radius: Val) -> BorderRadius

Returns the BorderRadius with its top_right field set to the given value.

pub const fn with_bottom_right(self, radius: Val) -> BorderRadius

Returns the BorderRadius with its bottom_right field set to the given value.

pub const fn with_bottom_left(self, radius: Val) -> BorderRadius

Returns the BorderRadius with its bottom_left field set to the given value.

pub const fn with_left(self, radius: Val) -> BorderRadius

Returns the BorderRadius with its top_left and bottom_left fields set to the given value.

pub const fn with_right(self, radius: Val) -> BorderRadius

Returns the BorderRadius with its top_right and bottom_right fields set to the given value.

pub const fn with_top(self, radius: Val) -> BorderRadius

Returns the BorderRadius with its top_left and top_right fields set to the given value.

pub const fn with_bottom(self, radius: Val) -> BorderRadius

Returns the BorderRadius with its bottom_left and bottom_right fields set to the given value.

pub fn resolve_single_corner( radius: Val, node_size: Vec2, viewport_size: Vec2, scale_factor: f32, ) -> f32

Resolve the border radius for a single corner from the given context values. Returns the radius of the corner in physical pixels.

pub fn resolve( &self, node_size: Vec2, viewport_size: Vec2, scale_factor: f32, ) -> ResolvedBorderRadius

Resolve the border radii for the corners from the given context values. Returns the radii of the each corner in physical pixels.

Trait Implementations

impl Clone for BorderRadius

fn clone(&self) -> BorderRadius

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Component for BorderRadius

where BorderRadius: Send + Sync + 'static,

const STORAGE_TYPE: StorageType = bevy_ecs::component::StorageType::Table

A constant indicating the storage type used for this component.

type Mutability = Mutable

A marker type to assist Bevy with determining if this component is mutable, or immutable. Mutable components will have Component<Mutability = Mutable>, while immutable components will instead have Component<Mutability = Immutable>.

fn register_required_components( requiree: ComponentId, components: &mut ComponentsRegistrator<'_>, required_components: &mut RequiredComponents, inheritance_depth: u16, recursion_check_stack: &mut Vec<ComponentId>, )

Registers required components.

fn clone_behavior() -> ComponentCloneBehavior

Called when registering this component, allowing to override clone function (or disable cloning altogether) for this component.

fn register_component_hooks(hooks: &mut ComponentHooks)

👎Deprecated since 0.16.0: Use the individual hook methods instead (e.g., Component::on_add, etc.)

Called when registering this component, allowing mutable access to its ComponentHooks.

fn on_add() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_add ComponentHook for this Component if one is defined.

fn on_insert() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_insert ComponentHook for this Component if one is defined.

fn on_replace() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_replace ComponentHook for this Component if one is defined.

fn on_remove() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_remove ComponentHook for this Component if one is defined.

fn on_despawn() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_despawn ComponentHook for this Component if one is defined.

fn map_entities<E>(_this: &mut Self, _mapper: &mut E)

where E: EntityMapper,

Maps the entities on this component using the given EntityMapper. This is used to remap entities in contexts like scenes and entity cloning. When deriving Component, this is populated by annotating fields containing entities with #[entities]

impl Debug for BorderRadius

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for BorderRadius

fn default() -> BorderRadius

Returns the “default value” for a type.

impl FromReflect for BorderRadius

where BorderRadius: Any + Send + Sync, Val: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn from_reflect( reflect: &(dyn PartialReflect + 'static), ) -> Option<BorderRadius>

Constructs a concrete instance of Self from a reflected value.

fn take_from_reflect( reflect: Box<dyn PartialReflect>, ) -> Result<Self, Box<dyn PartialReflect>>

Attempts to downcast the given value to Self using, constructing the value using from_reflect if that fails.

impl GetTypeRegistration for BorderRadius

where BorderRadius: Any + Send + Sync, Val: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn get_type_registration() -> TypeRegistration

Returns the default TypeRegistration for this type.

fn register_type_dependencies(registry: &mut TypeRegistry)

Registers other types needed by this type.

impl PartialEq for BorderRadius

fn eq(&self, other: &BorderRadius) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialReflect for BorderRadius

where BorderRadius: Any + Send + Sync, Val: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn get_represented_type_info(&self) -> Option<&'static TypeInfo>

Returns the TypeInfo of the type represented by this value.

fn try_apply( &mut self, value: &(dyn PartialReflect + 'static), ) -> Result<(), ApplyError>

Tries to apply a reflected value to this value.

fn reflect_kind(&self) -> ReflectKind

Returns a zero-sized enumeration of “kinds” of type.

fn reflect_ref(&self) -> ReflectRef<'_>

Returns an immutable enumeration of “kinds” of type.

fn reflect_mut(&mut self) -> ReflectMut<'_>

Returns a mutable enumeration of “kinds” of type.

fn reflect_owned(self: Box<BorderRadius>) -> ReflectOwned

Returns an owned enumeration of “kinds” of type.

fn try_into_reflect( self: Box<BorderRadius>, ) -> Result<Box<dyn Reflect>, Box<dyn PartialReflect>>

Attempts to cast this type to a boxed, fully-reflected value.

fn try_as_reflect(&self) -> Option<&(dyn Reflect + 'static)>

Attempts to cast this type to a fully-reflected value.

fn try_as_reflect_mut(&mut self) -> Option<&mut (dyn Reflect + 'static)>

Attempts to cast this type to a mutable, fully-reflected value.

fn into_partial_reflect(self: Box<BorderRadius>) -> Box<dyn PartialReflect>

Casts this type to a boxed, reflected value.

fn as_partial_reflect(&self) -> &(dyn PartialReflect + 'static)

Casts this type to a reflected value.

fn as_partial_reflect_mut(&mut self) -> &mut (dyn PartialReflect + 'static)

Casts this type to a mutable, reflected value.

fn reflect_partial_eq( &self, value: &(dyn PartialReflect + 'static), ) -> Option<bool>

Returns a “partial equality” comparison result.

fn debug(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Debug formatter for the value.

fn reflect_clone(&self) -> Result<Box<dyn Reflect>, ReflectCloneError>

Attempts to clone Self using reflection.

fn apply(&mut self, value: &(dyn PartialReflect + 'static))

Applies a reflected value to this value.

fn clone_value(&self) -> Box<dyn PartialReflect>

👎Deprecated since 0.16.0: to clone reflected values, prefer using reflect_clone. To convert reflected values to dynamic ones, use to_dynamic.

Clones Self into its dynamic representation.

fn to_dynamic(&self) -> Box<dyn PartialReflect>

Converts this reflected value into its dynamic representation based on its kind.

fn reflect_hash(&self) -> Option<u64>

Returns a hash of the value (which includes the type).

fn is_dynamic(&self) -> bool

Indicates whether or not this type is a dynamic type.

impl Reflect for BorderRadius

where BorderRadius: Any + Send + Sync, Val: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn into_any(self: Box<BorderRadius>) -> Box<dyn Any>

Returns the value as a Box<dyn Any>.

fn as_any(&self) -> &(dyn Any + 'static)

Returns the value as a &dyn Any.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Returns the value as a &mut dyn Any.

fn into_reflect(self: Box<BorderRadius>) -> Box<dyn Reflect>

Casts this type to a boxed, fully-reflected value.

fn as_reflect(&self) -> &(dyn Reflect + 'static)

Casts this type to a fully-reflected value.

fn as_reflect_mut(&mut self) -> &mut (dyn Reflect + 'static)

Casts this type to a mutable, fully-reflected value.

fn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>

Performs a type-checked assignment of a reflected value to this value.

impl Struct for BorderRadius

where BorderRadius: Any + Send + Sync, Val: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn field(&self, name: &str) -> Option<&(dyn PartialReflect + 'static)>

Returns a reference to the value of the field named name as a &dyn PartialReflect.

fn field_mut( &mut self, name: &str, ) -> Option<&mut (dyn PartialReflect + 'static)>

Returns a mutable reference to the value of the field named name as a &mut dyn PartialReflect.

fn field_at(&self, index: usize) -> Option<&(dyn PartialReflect + 'static)>

Returns a reference to the value of the field with index index as a &dyn PartialReflect.

fn field_at_mut( &mut self, index: usize, ) -> Option<&mut (dyn PartialReflect + 'static)>

Returns a mutable reference to the value of the field with index index as a &mut dyn PartialReflect.

fn name_at(&self, index: usize) -> Option<&str>

Returns the name of the field with index index.

fn field_len(&self) -> usize

Returns the number of fields in the struct.

fn iter_fields(&self) -> FieldIter<'_>

Returns an iterator over the values of the reflectable fields for this struct.

fn to_dynamic_struct(&self) -> DynamicStruct

fn clone_dynamic(&self) -> DynamicStruct

👎Deprecated since 0.16.0: use to_dynamic_struct instead

Clones the struct into a DynamicStruct.

fn get_represented_struct_info(&self) -> Option<&'static StructInfo>

Will return None if TypeInfo is not available.

impl TypePath for BorderRadius

where BorderRadius: Any + Send + Sync,

fn type_path() -> &'static str

Returns the fully qualified path of the underlying type.

fn short_type_path() -> &'static str

Returns a short, pretty-print enabled path to the type.

fn type_ident() -> Option<&'static str>

Returns the name of the type, or None if it is anonymous.

fn crate_name() -> Option<&'static str>

Returns the name of the crate the type is in, or None if it is anonymous.

fn module_path() -> Option<&'static str>

Returns the path to the module the type is in, or None if it is anonymous.

impl Typed for BorderRadius

where BorderRadius: Any + Send + Sync, Val: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn type_info() -> &'static TypeInfo

Returns the compile-time info for the underlying type.

impl Copy for BorderRadius

impl StructuralPartialEq for BorderRadius