Struct aws_sdk_globalaccelerator::operation::create_accelerator::builders::CreateAcceleratorFluentBuilder

pub struct CreateAcceleratorFluentBuilder { /* private fields */ }

Fluent builder constructing a request to CreateAccelerator.

Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.

Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on AWS CLI commands.

Implementations

impl CreateAcceleratorFluentBuilder

pub fn as_input(&self) -> &CreateAcceleratorInputBuilder

Access the CreateAccelerator as a reference.

pub async fn send( self ) -> Result<CreateAcceleratorOutput, SdkError<CreateAcceleratorError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub async fn customize( self ) -> Result<CustomizableOperation<CreateAcceleratorOutput, CreateAcceleratorError>, SdkError<CreateAcceleratorError>>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn name(self, input: impl Into<String>) -> Self

The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.

pub fn set_name(self, input: Option<String>) -> Self

The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.

pub fn get_name(&self) -> &Option<String>

The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.

pub fn ip_address_type(self, input: IpAddressType) -> Self

The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.

pub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self

The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.

pub fn get_ip_address_type(&self) -> &Option<IpAddressType>

The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.

pub fn ip_addresses(self, input: impl Into<String>) -> Self

Appends an item to IpAddresses.

To override the contents of this collection use set_ip_addresses.

Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address from your own pool to use for the accelerator's static IPv4 address when you create an accelerator.

After you bring an address range to Amazon Web Services, it appears in your account as an address pool. When you create an accelerator, you can assign one IPv4 address from your range to it. Global Accelerator assigns you a second static IPv4 address from an Amazon IP address range. If you bring two IPv4 address ranges to Amazon Web Services, you can assign one IPv4 address from each range to your accelerator. This restriction is because Global Accelerator assigns each address range to a different network zone, for high availability.

You can specify one or two addresses, separated by a space. Do not include the /32 suffix.

Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.

For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

pub fn set_ip_addresses(self, input: Option<Vec<String>>) -> Self

Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address from your own pool to use for the accelerator's static IPv4 address when you create an accelerator.

After you bring an address range to Amazon Web Services, it appears in your account as an address pool. When you create an accelerator, you can assign one IPv4 address from your range to it. Global Accelerator assigns you a second static IPv4 address from an Amazon IP address range. If you bring two IPv4 address ranges to Amazon Web Services, you can assign one IPv4 address from each range to your accelerator. This restriction is because Global Accelerator assigns each address range to a different network zone, for high availability.

You can specify one or two addresses, separated by a space. Do not include the /32 suffix.

Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.

For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

pub fn get_ip_addresses(&self) -> &Option<Vec<String>>

Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address from your own pool to use for the accelerator's static IPv4 address when you create an accelerator.

After you bring an address range to Amazon Web Services, it appears in your account as an address pool. When you create an accelerator, you can assign one IPv4 address from your range to it. Global Accelerator assigns you a second static IPv4 address from an Amazon IP address range. If you bring two IPv4 address ranges to Amazon Web Services, you can assign one IPv4 address from each range to your accelerator. This restriction is because Global Accelerator assigns each address range to a different network zone, for high availability.

You can specify one or two addresses, separated by a space. Do not include the /32 suffix.

Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.

For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

pub fn enabled(self, input: bool) -> Self

Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.

pub fn set_enabled(self, input: Option<bool>) -> Self

Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.

pub fn get_enabled(&self) -> &Option<bool>

Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.

pub fn idempotency_token(self, input: impl Into<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of an accelerator.

pub fn set_idempotency_token(self, input: Option<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of an accelerator.

pub fn get_idempotency_token(&self) -> &Option<String>

A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of an accelerator.

pub fn tags(self, input: Tag) -> Self

Appends an item to Tags.

To override the contents of this collection use set_tags.

Create tags for an accelerator.

For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

Create tags for an accelerator.

For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.

pub fn get_tags(&self) -> &Option<Vec<Tag>>

Create tags for an accelerator.

For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.

Trait Implementations

impl Clone for CreateAcceleratorFluentBuilder

fn clone(&self) -> CreateAcceleratorFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateAcceleratorFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.