Struct aws_sdk_globalaccelerator::operation::create_accelerator::builders::CreateAcceleratorInputBuilder

#[non_exhaustive]
pub struct CreateAcceleratorInputBuilder { /* private fields */ }

A builder for CreateAcceleratorInput.

Implementations

impl CreateAcceleratorInputBuilder

pub fn name(self, input: impl Into<String>) -> Self

The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.

pub fn set_name(self, input: Option<String>) -> Self

The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.

pub fn get_name(&self) -> &Option<String>

The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.

pub fn ip_address_type(self, input: IpAddressType) -> Self

The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.

pub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self

The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.

pub fn get_ip_address_type(&self) -> &Option<IpAddressType>

The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.

pub fn ip_addresses(self, input: impl Into<String>) -> Self

Appends an item to ip_addresses.

To override the contents of this collection use set_ip_addresses.

Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address from your own pool to use for the accelerator's static IPv4 address when you create an accelerator.

After you bring an address range to Amazon Web Services, it appears in your account as an address pool. When you create an accelerator, you can assign one IPv4 address from your range to it. Global Accelerator assigns you a second static IPv4 address from an Amazon IP address range. If you bring two IPv4 address ranges to Amazon Web Services, you can assign one IPv4 address from each range to your accelerator. This restriction is because Global Accelerator assigns each address range to a different network zone, for high availability.

You can specify one or two addresses, separated by a space. Do not include the /32 suffix.

Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.

For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

pub fn set_ip_addresses(self, input: Option<Vec<String>>) -> Self

Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address from your own pool to use for the accelerator's static IPv4 address when you create an accelerator.

After you bring an address range to Amazon Web Services, it appears in your account as an address pool. When you create an accelerator, you can assign one IPv4 address from your range to it. Global Accelerator assigns you a second static IPv4 address from an Amazon IP address range. If you bring two IPv4 address ranges to Amazon Web Services, you can assign one IPv4 address from each range to your accelerator. This restriction is because Global Accelerator assigns each address range to a different network zone, for high availability.

You can specify one or two addresses, separated by a space. Do not include the /32 suffix.

Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.

For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

pub fn get_ip_addresses(&self) -> &Option<Vec<String>>

Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address from your own pool to use for the accelerator's static IPv4 address when you create an accelerator.

After you bring an address range to Amazon Web Services, it appears in your account as an address pool. When you create an accelerator, you can assign one IPv4 address from your range to it. Global Accelerator assigns you a second static IPv4 address from an Amazon IP address range. If you bring two IPv4 address ranges to Amazon Web Services, you can assign one IPv4 address from each range to your accelerator. This restriction is because Global Accelerator assigns each address range to a different network zone, for high availability.

You can specify one or two addresses, separated by a space. Do not include the /32 suffix.

Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.

For more information, see Bring your own IP addresses (BYOIP) in the Global Accelerator Developer Guide.

pub fn enabled(self, input: bool) -> Self

Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.

pub fn set_enabled(self, input: Option<bool>) -> Self

Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.

pub fn get_enabled(&self) -> &Option<bool>

Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.

pub fn idempotency_token(self, input: impl Into<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of an accelerator.

pub fn set_idempotency_token(self, input: Option<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of an accelerator.

pub fn get_idempotency_token(&self) -> &Option<String>

A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of an accelerator.

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

Create tags for an accelerator.

For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

Create tags for an accelerator.

For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.

pub fn get_tags(&self) -> &Option<Vec<Tag>>

Create tags for an accelerator.

For more information, see Tagging in Global Accelerator in the Global Accelerator Developer Guide.

pub fn build(self) -> Result<CreateAcceleratorInput, BuildError>

Consumes the builder and constructs a CreateAcceleratorInput.

impl CreateAcceleratorInputBuilder

pub async fn send_with( self, client: &Client ) -> Result<CreateAcceleratorOutput, SdkError<CreateAcceleratorError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for CreateAcceleratorInputBuilder

fn clone(&self) -> CreateAcceleratorInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateAcceleratorInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for CreateAcceleratorInputBuilder

fn default() -> CreateAcceleratorInputBuilder

Returns the “default value” for a type.

impl PartialEq<CreateAcceleratorInputBuilder> for CreateAcceleratorInputBuilder

fn eq(&self, other: &CreateAcceleratorInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CreateAcceleratorInputBuilder