pub struct ListTaskDefinitionsFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to ListTaskDefinitions
.
Returns a list of task definitions that are registered to your account. You can filter the results by family name with the familyPrefix
parameter or by status with the status
parameter.
Implementations§
Source§impl ListTaskDefinitionsFluentBuilder
impl ListTaskDefinitionsFluentBuilder
Sourcepub fn as_input(&self) -> &ListTaskDefinitionsInputBuilder
pub fn as_input(&self) -> &ListTaskDefinitionsInputBuilder
Access the ListTaskDefinitions as a reference.
Sourcepub async fn send(
self,
) -> Result<ListTaskDefinitionsOutput, SdkError<ListTaskDefinitionsError, HttpResponse>>
pub async fn send( self, ) -> Result<ListTaskDefinitionsOutput, SdkError<ListTaskDefinitionsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ListTaskDefinitionsOutput, ListTaskDefinitionsError, Self>
pub fn customize( self, ) -> CustomizableOperation<ListTaskDefinitionsOutput, ListTaskDefinitionsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> ListTaskDefinitionsPaginator
pub fn into_paginator(self) -> ListTaskDefinitionsPaginator
Create a paginator for this request
Paginators are used by calling send().await
which returns a PaginationStream
.
Sourcepub fn family_prefix(self, input: impl Into<String>) -> Self
pub fn family_prefix(self, input: impl Into<String>) -> Self
The full family name to filter the ListTaskDefinitions
results with. Specifying a familyPrefix
limits the listed task definitions to task definition revisions that belong to that family.
Sourcepub fn set_family_prefix(self, input: Option<String>) -> Self
pub fn set_family_prefix(self, input: Option<String>) -> Self
The full family name to filter the ListTaskDefinitions
results with. Specifying a familyPrefix
limits the listed task definitions to task definition revisions that belong to that family.
Sourcepub fn get_family_prefix(&self) -> &Option<String>
pub fn get_family_prefix(&self) -> &Option<String>
The full family name to filter the ListTaskDefinitions
results with. Specifying a familyPrefix
limits the listed task definitions to task definition revisions that belong to that family.
Sourcepub fn status(self, input: TaskDefinitionStatus) -> Self
pub fn status(self, input: TaskDefinitionStatus) -> Self
The task definition status to filter the ListTaskDefinitions
results with. By default, only ACTIVE
task definitions are listed. By setting this parameter to INACTIVE
, you can view task definitions that are INACTIVE
as long as an active task or service still references them. If you paginate the resulting output, be sure to keep the status
value constant in each subsequent request.
Sourcepub fn set_status(self, input: Option<TaskDefinitionStatus>) -> Self
pub fn set_status(self, input: Option<TaskDefinitionStatus>) -> Self
The task definition status to filter the ListTaskDefinitions
results with. By default, only ACTIVE
task definitions are listed. By setting this parameter to INACTIVE
, you can view task definitions that are INACTIVE
as long as an active task or service still references them. If you paginate the resulting output, be sure to keep the status
value constant in each subsequent request.
Sourcepub fn get_status(&self) -> &Option<TaskDefinitionStatus>
pub fn get_status(&self) -> &Option<TaskDefinitionStatus>
The task definition status to filter the ListTaskDefinitions
results with. By default, only ACTIVE
task definitions are listed. By setting this parameter to INACTIVE
, you can view task definitions that are INACTIVE
as long as an active task or service still references them. If you paginate the resulting output, be sure to keep the status
value constant in each subsequent request.
Sourcepub fn sort(self, input: SortOrder) -> Self
pub fn sort(self, input: SortOrder) -> Self
The order to sort the results in. Valid values are ASC
and DESC
. By default, (ASC
) task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter to DESC
reverses the sort order on family name and revision. This is so that the newest task definitions in a family are listed first.
Sourcepub fn set_sort(self, input: Option<SortOrder>) -> Self
pub fn set_sort(self, input: Option<SortOrder>) -> Self
The order to sort the results in. Valid values are ASC
and DESC
. By default, (ASC
) task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter to DESC
reverses the sort order on family name and revision. This is so that the newest task definitions in a family are listed first.
Sourcepub fn get_sort(&self) -> &Option<SortOrder>
pub fn get_sort(&self) -> &Option<SortOrder>
The order to sort the results in. Valid values are ASC
and DESC
. By default, (ASC
) task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter to DESC
reverses the sort order on family name and revision. This is so that the newest task definitions in a family are listed first.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The nextToken
value returned from a ListTaskDefinitions
request indicating that more results are available to fulfill the request and further calls will be needed. If maxResults
was provided, it is possible the number of results to be fewer than maxResults
.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The nextToken
value returned from a ListTaskDefinitions
request indicating that more results are available to fulfill the request and further calls will be needed. If maxResults
was provided, it is possible the number of results to be fewer than maxResults
.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The nextToken
value returned from a ListTaskDefinitions
request indicating that more results are available to fulfill the request and further calls will be needed. If maxResults
was provided, it is possible the number of results to be fewer than maxResults
.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of task definition results that ListTaskDefinitions
returned in paginated output. When this parameter is used, ListTaskDefinitions
only returns maxResults
results in a single page along with a nextToken
response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitions
request with the returned nextToken
value. This value can be between 1 and 100. If this parameter isn't used, then ListTaskDefinitions
returns up to 100 results and a nextToken
value if applicable.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of task definition results that ListTaskDefinitions
returned in paginated output. When this parameter is used, ListTaskDefinitions
only returns maxResults
results in a single page along with a nextToken
response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitions
request with the returned nextToken
value. This value can be between 1 and 100. If this parameter isn't used, then ListTaskDefinitions
returns up to 100 results and a nextToken
value if applicable.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of task definition results that ListTaskDefinitions
returned in paginated output. When this parameter is used, ListTaskDefinitions
only returns maxResults
results in a single page along with a nextToken
response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitions
request with the returned nextToken
value. This value can be between 1 and 100. If this parameter isn't used, then ListTaskDefinitions
returns up to 100 results and a nextToken
value if applicable.
Trait Implementations§
Source§impl Clone for ListTaskDefinitionsFluentBuilder
impl Clone for ListTaskDefinitionsFluentBuilder
Source§fn clone(&self) -> ListTaskDefinitionsFluentBuilder
fn clone(&self) -> ListTaskDefinitionsFluentBuilder
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for ListTaskDefinitionsFluentBuilder
impl !RefUnwindSafe for ListTaskDefinitionsFluentBuilder
impl Send for ListTaskDefinitionsFluentBuilder
impl Sync for ListTaskDefinitionsFluentBuilder
impl Unpin for ListTaskDefinitionsFluentBuilder
impl !UnwindSafe for ListTaskDefinitionsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);