#[non_exhaustive]pub struct ListTaskDefinitionsInputBuilder { /* private fields */ }Expand description
A builder for ListTaskDefinitionsInput.
Implementations§
Source§impl ListTaskDefinitionsInputBuilder
impl ListTaskDefinitionsInputBuilder
Sourcepub fn family_prefix(self, input: impl Into<String>) -> Self
pub fn family_prefix(self, input: impl Into<String>) -> Self
The full family name to filter the ListTaskDefinitions results with. Specifying a familyPrefix limits the listed task definitions to task definition revisions that belong to that family.
Sourcepub fn set_family_prefix(self, input: Option<String>) -> Self
pub fn set_family_prefix(self, input: Option<String>) -> Self
The full family name to filter the ListTaskDefinitions results with. Specifying a familyPrefix limits the listed task definitions to task definition revisions that belong to that family.
Sourcepub fn get_family_prefix(&self) -> &Option<String>
pub fn get_family_prefix(&self) -> &Option<String>
The full family name to filter the ListTaskDefinitions results with. Specifying a familyPrefix limits the listed task definitions to task definition revisions that belong to that family.
Sourcepub fn status(self, input: TaskDefinitionStatus) -> Self
pub fn status(self, input: TaskDefinitionStatus) -> Self
The task definition status to filter the ListTaskDefinitions results with. By default, only ACTIVE task definitions are listed. By setting this parameter to INACTIVE, you can view task definitions that are INACTIVE as long as an active task or service still references them. If you paginate the resulting output, be sure to keep the status value constant in each subsequent request.
Sourcepub fn set_status(self, input: Option<TaskDefinitionStatus>) -> Self
pub fn set_status(self, input: Option<TaskDefinitionStatus>) -> Self
The task definition status to filter the ListTaskDefinitions results with. By default, only ACTIVE task definitions are listed. By setting this parameter to INACTIVE, you can view task definitions that are INACTIVE as long as an active task or service still references them. If you paginate the resulting output, be sure to keep the status value constant in each subsequent request.
Sourcepub fn get_status(&self) -> &Option<TaskDefinitionStatus>
pub fn get_status(&self) -> &Option<TaskDefinitionStatus>
The task definition status to filter the ListTaskDefinitions results with. By default, only ACTIVE task definitions are listed. By setting this parameter to INACTIVE, you can view task definitions that are INACTIVE as long as an active task or service still references them. If you paginate the resulting output, be sure to keep the status value constant in each subsequent request.
Sourcepub fn sort(self, input: SortOrder) -> Self
pub fn sort(self, input: SortOrder) -> Self
The order to sort the results in. Valid values are ASC and DESC. By default, (ASC) task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter to DESC reverses the sort order on family name and revision. This is so that the newest task definitions in a family are listed first.
Sourcepub fn set_sort(self, input: Option<SortOrder>) -> Self
pub fn set_sort(self, input: Option<SortOrder>) -> Self
The order to sort the results in. Valid values are ASC and DESC. By default, (ASC) task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter to DESC reverses the sort order on family name and revision. This is so that the newest task definitions in a family are listed first.
Sourcepub fn get_sort(&self) -> &Option<SortOrder>
pub fn get_sort(&self) -> &Option<SortOrder>
The order to sort the results in. Valid values are ASC and DESC. By default, (ASC) task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter to DESC reverses the sort order on family name and revision. This is so that the newest task definitions in a family are listed first.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The nextToken value returned from a ListTaskDefinitions request indicating that more results are available to fulfill the request and further calls will be needed. If maxResults was provided, it is possible the number of results to be fewer than maxResults.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The nextToken value returned from a ListTaskDefinitions request indicating that more results are available to fulfill the request and further calls will be needed. If maxResults was provided, it is possible the number of results to be fewer than maxResults.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The nextToken value returned from a ListTaskDefinitions request indicating that more results are available to fulfill the request and further calls will be needed. If maxResults was provided, it is possible the number of results to be fewer than maxResults.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of task definition results that ListTaskDefinitions returned in paginated output. When this parameter is used, ListTaskDefinitions only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitions request with the returned nextToken value. This value can be between 1 and 100. If this parameter isn't used, then ListTaskDefinitions returns up to 100 results and a nextToken value if applicable.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of task definition results that ListTaskDefinitions returned in paginated output. When this parameter is used, ListTaskDefinitions only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitions request with the returned nextToken value. This value can be between 1 and 100. If this parameter isn't used, then ListTaskDefinitions returns up to 100 results and a nextToken value if applicable.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of task definition results that ListTaskDefinitions returned in paginated output. When this parameter is used, ListTaskDefinitions only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitions request with the returned nextToken value. This value can be between 1 and 100. If this parameter isn't used, then ListTaskDefinitions returns up to 100 results and a nextToken value if applicable.
Sourcepub fn build(self) -> Result<ListTaskDefinitionsInput, BuildError>
pub fn build(self) -> Result<ListTaskDefinitionsInput, BuildError>
Consumes the builder and constructs a ListTaskDefinitionsInput.
Source§impl ListTaskDefinitionsInputBuilder
impl ListTaskDefinitionsInputBuilder
Sourcepub async fn send_with(
self,
client: &Client,
) -> Result<ListTaskDefinitionsOutput, SdkError<ListTaskDefinitionsError, HttpResponse>>
pub async fn send_with( self, client: &Client, ) -> Result<ListTaskDefinitionsOutput, SdkError<ListTaskDefinitionsError, HttpResponse>>
Sends a request with this input using the given client.
Trait Implementations§
Source§impl Clone for ListTaskDefinitionsInputBuilder
impl Clone for ListTaskDefinitionsInputBuilder
Source§fn clone(&self) -> ListTaskDefinitionsInputBuilder
fn clone(&self) -> ListTaskDefinitionsInputBuilder
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Default for ListTaskDefinitionsInputBuilder
impl Default for ListTaskDefinitionsInputBuilder
Source§fn default() -> ListTaskDefinitionsInputBuilder
fn default() -> ListTaskDefinitionsInputBuilder
Source§impl PartialEq for ListTaskDefinitionsInputBuilder
impl PartialEq for ListTaskDefinitionsInputBuilder
Source§fn eq(&self, other: &ListTaskDefinitionsInputBuilder) -> bool
fn eq(&self, other: &ListTaskDefinitionsInputBuilder) -> bool
self and other values to be equal, and is used by ==.impl StructuralPartialEq for ListTaskDefinitionsInputBuilder
Auto Trait Implementations§
impl Freeze for ListTaskDefinitionsInputBuilder
impl RefUnwindSafe for ListTaskDefinitionsInputBuilder
impl Send for ListTaskDefinitionsInputBuilder
impl Sync for ListTaskDefinitionsInputBuilder
impl Unpin for ListTaskDefinitionsInputBuilder
impl UnwindSafe for ListTaskDefinitionsInputBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);