Struct aws_sdk_ec2::operation::replace_route::builders::ReplaceRouteFluentBuilder

pub struct ReplaceRouteFluentBuilder { /* private fields */ }

Fluent builder constructing a request to ReplaceRoute.

Replaces an existing route within a route table in a VPC.

You must specify either a destination CIDR block or a prefix list ID. You must also specify exactly one of the resources from the parameter list, or reset the local route to its default target.

For more information, see Route tables in the Amazon VPC User Guide.

Implementations

impl ReplaceRouteFluentBuilder

pub fn as_input(&self) -> &ReplaceRouteInputBuilder

Access the ReplaceRoute as a reference.

pub async fn send( self ) -> Result<ReplaceRouteOutput, SdkError<ReplaceRouteError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self ) -> CustomizableOperation<ReplaceRouteOutput, ReplaceRouteError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn destination_cidr_block(self, input: impl Into<String>) -> Self

The IPv4 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.

pub fn set_destination_cidr_block(self, input: Option<String>) -> Self

The IPv4 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.

pub fn get_destination_cidr_block(&self) -> &Option<String>

The IPv4 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.

pub fn destination_ipv6_cidr_block(self, input: impl Into<String>) -> Self

The IPv6 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.

pub fn set_destination_ipv6_cidr_block(self, input: Option<String>) -> Self

The IPv6 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.

pub fn get_destination_ipv6_cidr_block(&self) -> &Option<String>

The IPv6 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.

pub fn destination_prefix_list_id(self, input: impl Into<String>) -> Self

The ID of the prefix list for the route.

pub fn set_destination_prefix_list_id(self, input: Option<String>) -> Self

The ID of the prefix list for the route.

pub fn get_destination_prefix_list_id(&self) -> &Option<String>

The ID of the prefix list for the route.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn vpc_endpoint_id(self, input: impl Into<String>) -> Self

The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.

pub fn set_vpc_endpoint_id(self, input: Option<String>) -> Self

The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.

pub fn get_vpc_endpoint_id(&self) -> &Option<String>

The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.

pub fn egress_only_internet_gateway_id(self, input: impl Into<String>) -> Self

[IPv6 traffic only] The ID of an egress-only internet gateway.

pub fn set_egress_only_internet_gateway_id(self, input: Option<String>) -> Self

[IPv6 traffic only] The ID of an egress-only internet gateway.

pub fn get_egress_only_internet_gateway_id(&self) -> &Option<String>

[IPv6 traffic only] The ID of an egress-only internet gateway.

pub fn gateway_id(self, input: impl Into<String>) -> Self

The ID of an internet gateway or virtual private gateway.

pub fn set_gateway_id(self, input: Option<String>) -> Self

The ID of an internet gateway or virtual private gateway.

pub fn get_gateway_id(&self) -> &Option<String>

The ID of an internet gateway or virtual private gateway.

pub fn instance_id(self, input: impl Into<String>) -> Self

The ID of a NAT instance in your VPC.

pub fn set_instance_id(self, input: Option<String>) -> Self

The ID of a NAT instance in your VPC.

pub fn get_instance_id(&self) -> &Option<String>

The ID of a NAT instance in your VPC.

pub fn local_target(self, input: bool) -> Self

Specifies whether to reset the local route to its default target (local).

pub fn set_local_target(self, input: Option<bool>) -> Self

Specifies whether to reset the local route to its default target (local).

pub fn get_local_target(&self) -> &Option<bool>

Specifies whether to reset the local route to its default target (local).

pub fn nat_gateway_id(self, input: impl Into<String>) -> Self

[IPv4 traffic only] The ID of a NAT gateway.

pub fn set_nat_gateway_id(self, input: Option<String>) -> Self

[IPv4 traffic only] The ID of a NAT gateway.

pub fn get_nat_gateway_id(&self) -> &Option<String>

[IPv4 traffic only] The ID of a NAT gateway.

pub fn transit_gateway_id(self, input: impl Into<String>) -> Self

The ID of a transit gateway.

pub fn set_transit_gateway_id(self, input: Option<String>) -> Self

The ID of a transit gateway.

pub fn get_transit_gateway_id(&self) -> &Option<String>

The ID of a transit gateway.

pub fn local_gateway_id(self, input: impl Into<String>) -> Self

The ID of the local gateway.

pub fn set_local_gateway_id(self, input: Option<String>) -> Self

The ID of the local gateway.

pub fn get_local_gateway_id(&self) -> &Option<String>

The ID of the local gateway.

pub fn carrier_gateway_id(self, input: impl Into<String>) -> Self

[IPv4 traffic only] The ID of a carrier gateway.

pub fn set_carrier_gateway_id(self, input: Option<String>) -> Self

[IPv4 traffic only] The ID of a carrier gateway.

pub fn get_carrier_gateway_id(&self) -> &Option<String>

[IPv4 traffic only] The ID of a carrier gateway.

pub fn network_interface_id(self, input: impl Into<String>) -> Self

The ID of a network interface.

pub fn set_network_interface_id(self, input: Option<String>) -> Self

The ID of a network interface.

pub fn get_network_interface_id(&self) -> &Option<String>

The ID of a network interface.

pub fn route_table_id(self, input: impl Into<String>) -> Self

The ID of the route table.

pub fn set_route_table_id(self, input: Option<String>) -> Self

The ID of the route table.

pub fn get_route_table_id(&self) -> &Option<String>

The ID of the route table.

pub fn vpc_peering_connection_id(self, input: impl Into<String>) -> Self

The ID of a VPC peering connection.

pub fn set_vpc_peering_connection_id(self, input: Option<String>) -> Self

The ID of a VPC peering connection.

pub fn get_vpc_peering_connection_id(&self) -> &Option<String>

The ID of a VPC peering connection.

pub fn core_network_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the core network.

pub fn set_core_network_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the core network.

pub fn get_core_network_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the core network.

Trait Implementations

impl Clone for ReplaceRouteFluentBuilder

fn clone(&self) -> ReplaceRouteFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ReplaceRouteFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.