// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::replace_route::_replace_route_output::ReplaceRouteOutputBuilder;

pub use crate::operation::replace_route::_replace_route_input::ReplaceRouteInputBuilder;

impl ReplaceRouteInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::replace_route::ReplaceRouteOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::replace_route::ReplaceRouteError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.replace_route();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `ReplaceRoute`.
///
/// <p>Replaces an existing route within a route table in a VPC.</p>
/// <p>You must specify either a destination CIDR block or a prefix list ID. You must also specify exactly one of the resources from the parameter list, or reset the local route to its default target.</p>
/// <p>For more information, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Route_Tables.html">Route tables</a> in the <i>Amazon VPC User Guide</i>.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct ReplaceRouteFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::replace_route::builders::ReplaceRouteInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::replace_route::ReplaceRouteOutput,
        crate::operation::replace_route::ReplaceRouteError,
    > for ReplaceRouteFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::replace_route::ReplaceRouteOutput,
            crate::operation::replace_route::ReplaceRouteError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl ReplaceRouteFluentBuilder {
    /// Creates a new `ReplaceRoute`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the ReplaceRoute as a reference.
    pub fn as_input(&self) -> &crate::operation::replace_route::builders::ReplaceRouteInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::replace_route::ReplaceRouteOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::replace_route::ReplaceRouteError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::replace_route::ReplaceRoute::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::replace_route::ReplaceRoute::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::replace_route::ReplaceRouteOutput,
        crate::operation::replace_route::ReplaceRouteError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>The IPv4 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.</p>
    pub fn destination_cidr_block(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.destination_cidr_block(input.into());
        self
    }
    /// <p>The IPv4 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.</p>
    pub fn set_destination_cidr_block(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_destination_cidr_block(input);
        self
    }
    /// <p>The IPv4 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.</p>
    pub fn get_destination_cidr_block(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_destination_cidr_block()
    }
    /// <p>The IPv6 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.</p>
    pub fn destination_ipv6_cidr_block(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.destination_ipv6_cidr_block(input.into());
        self
    }
    /// <p>The IPv6 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.</p>
    pub fn set_destination_ipv6_cidr_block(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_destination_ipv6_cidr_block(input);
        self
    }
    /// <p>The IPv6 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.</p>
    pub fn get_destination_ipv6_cidr_block(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_destination_ipv6_cidr_block()
    }
    /// <p>The ID of the prefix list for the route.</p>
    pub fn destination_prefix_list_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.destination_prefix_list_id(input.into());
        self
    }
    /// <p>The ID of the prefix list for the route.</p>
    pub fn set_destination_prefix_list_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_destination_prefix_list_id(input);
        self
    }
    /// <p>The ID of the prefix list for the route.</p>
    pub fn get_destination_prefix_list_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_destination_prefix_list_id()
    }
    /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
    pub fn dry_run(mut self, input: bool) -> Self {
        self.inner = self.inner.dry_run(input);
        self
    }
    /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
    pub fn set_dry_run(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_dry_run(input);
        self
    }
    /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
    pub fn get_dry_run(&self) -> &::std::option::Option<bool> {
        self.inner.get_dry_run()
    }
    /// <p>The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.</p>
    pub fn vpc_endpoint_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.vpc_endpoint_id(input.into());
        self
    }
    /// <p>The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.</p>
    pub fn set_vpc_endpoint_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_vpc_endpoint_id(input);
        self
    }
    /// <p>The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.</p>
    pub fn get_vpc_endpoint_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_vpc_endpoint_id()
    }
    /// <p>[IPv6 traffic only] The ID of an egress-only internet gateway.</p>
    pub fn egress_only_internet_gateway_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.egress_only_internet_gateway_id(input.into());
        self
    }
    /// <p>[IPv6 traffic only] The ID of an egress-only internet gateway.</p>
    pub fn set_egress_only_internet_gateway_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_egress_only_internet_gateway_id(input);
        self
    }
    /// <p>[IPv6 traffic only] The ID of an egress-only internet gateway.</p>
    pub fn get_egress_only_internet_gateway_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_egress_only_internet_gateway_id()
    }
    /// <p>The ID of an internet gateway or virtual private gateway.</p>
    pub fn gateway_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.gateway_id(input.into());
        self
    }
    /// <p>The ID of an internet gateway or virtual private gateway.</p>
    pub fn set_gateway_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_gateway_id(input);
        self
    }
    /// <p>The ID of an internet gateway or virtual private gateway.</p>
    pub fn get_gateway_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_gateway_id()
    }
    /// <p>The ID of a NAT instance in your VPC.</p>
    pub fn instance_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.instance_id(input.into());
        self
    }
    /// <p>The ID of a NAT instance in your VPC.</p>
    pub fn set_instance_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_instance_id(input);
        self
    }
    /// <p>The ID of a NAT instance in your VPC.</p>
    pub fn get_instance_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_instance_id()
    }
    /// <p>Specifies whether to reset the local route to its default target (<code>local</code>).</p>
    pub fn local_target(mut self, input: bool) -> Self {
        self.inner = self.inner.local_target(input);
        self
    }
    /// <p>Specifies whether to reset the local route to its default target (<code>local</code>).</p>
    pub fn set_local_target(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_local_target(input);
        self
    }
    /// <p>Specifies whether to reset the local route to its default target (<code>local</code>).</p>
    pub fn get_local_target(&self) -> &::std::option::Option<bool> {
        self.inner.get_local_target()
    }
    /// <p>[IPv4 traffic only] The ID of a NAT gateway.</p>
    pub fn nat_gateway_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.nat_gateway_id(input.into());
        self
    }
    /// <p>[IPv4 traffic only] The ID of a NAT gateway.</p>
    pub fn set_nat_gateway_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_nat_gateway_id(input);
        self
    }
    /// <p>[IPv4 traffic only] The ID of a NAT gateway.</p>
    pub fn get_nat_gateway_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_nat_gateway_id()
    }
    /// <p>The ID of a transit gateway.</p>
    pub fn transit_gateway_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.transit_gateway_id(input.into());
        self
    }
    /// <p>The ID of a transit gateway.</p>
    pub fn set_transit_gateway_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_transit_gateway_id(input);
        self
    }
    /// <p>The ID of a transit gateway.</p>
    pub fn get_transit_gateway_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_transit_gateway_id()
    }
    /// <p>The ID of the local gateway.</p>
    pub fn local_gateway_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.local_gateway_id(input.into());
        self
    }
    /// <p>The ID of the local gateway.</p>
    pub fn set_local_gateway_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_local_gateway_id(input);
        self
    }
    /// <p>The ID of the local gateway.</p>
    pub fn get_local_gateway_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_local_gateway_id()
    }
    /// <p>[IPv4 traffic only] The ID of a carrier gateway.</p>
    pub fn carrier_gateway_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.carrier_gateway_id(input.into());
        self
    }
    /// <p>[IPv4 traffic only] The ID of a carrier gateway.</p>
    pub fn set_carrier_gateway_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_carrier_gateway_id(input);
        self
    }
    /// <p>[IPv4 traffic only] The ID of a carrier gateway.</p>
    pub fn get_carrier_gateway_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_carrier_gateway_id()
    }
    /// <p>The ID of a network interface.</p>
    pub fn network_interface_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.network_interface_id(input.into());
        self
    }
    /// <p>The ID of a network interface.</p>
    pub fn set_network_interface_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_network_interface_id(input);
        self
    }
    /// <p>The ID of a network interface.</p>
    pub fn get_network_interface_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_network_interface_id()
    }
    /// <p>The ID of the route table.</p>
    pub fn route_table_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.route_table_id(input.into());
        self
    }
    /// <p>The ID of the route table.</p>
    pub fn set_route_table_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_route_table_id(input);
        self
    }
    /// <p>The ID of the route table.</p>
    pub fn get_route_table_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_route_table_id()
    }
    /// <p>The ID of a VPC peering connection.</p>
    pub fn vpc_peering_connection_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.vpc_peering_connection_id(input.into());
        self
    }
    /// <p>The ID of a VPC peering connection.</p>
    pub fn set_vpc_peering_connection_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_vpc_peering_connection_id(input);
        self
    }
    /// <p>The ID of a VPC peering connection.</p>
    pub fn get_vpc_peering_connection_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_vpc_peering_connection_id()
    }
    /// <p>The Amazon Resource Name (ARN) of the core network.</p>
    pub fn core_network_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.core_network_arn(input.into());
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the core network.</p>
    pub fn set_core_network_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_core_network_arn(input);
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the core network.</p>
    pub fn get_core_network_arn(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_core_network_arn()
    }
}