pub struct UpdateJobQueueFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateJobQueue.
Updates a job queue.
Implementations§
Source§impl UpdateJobQueueFluentBuilder
impl UpdateJobQueueFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateJobQueueInputBuilder
pub fn as_input(&self) -> &UpdateJobQueueInputBuilder
Access the UpdateJobQueue as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateJobQueueOutput, SdkError<UpdateJobQueueError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateJobQueueOutput, SdkError<UpdateJobQueueError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateJobQueueOutput, UpdateJobQueueError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateJobQueueOutput, UpdateJobQueueError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn job_queue(self, input: impl Into<String>) -> Self
pub fn job_queue(self, input: impl Into<String>) -> Self
The name or the Amazon Resource Name (ARN) of the job queue.
Sourcepub fn set_job_queue(self, input: Option<String>) -> Self
pub fn set_job_queue(self, input: Option<String>) -> Self
The name or the Amazon Resource Name (ARN) of the job queue.
Sourcepub fn get_job_queue(&self) -> &Option<String>
pub fn get_job_queue(&self) -> &Option<String>
The name or the Amazon Resource Name (ARN) of the job queue.
Sourcepub fn state(self, input: JqState) -> Self
pub fn state(self, input: JqState) -> Self
Describes the queue's ability to accept new jobs. If the job queue state is ENABLED, it can accept jobs. If the job queue state is DISABLED, new jobs can't be added to the queue, but jobs already in the queue can finish.
Sourcepub fn set_state(self, input: Option<JqState>) -> Self
pub fn set_state(self, input: Option<JqState>) -> Self
Describes the queue's ability to accept new jobs. If the job queue state is ENABLED, it can accept jobs. If the job queue state is DISABLED, new jobs can't be added to the queue, but jobs already in the queue can finish.
Sourcepub fn get_state(&self) -> &Option<JqState>
pub fn get_state(&self) -> &Option<JqState>
Describes the queue's ability to accept new jobs. If the job queue state is ENABLED, it can accept jobs. If the job queue state is DISABLED, new jobs can't be added to the queue, but jobs already in the queue can finish.
Sourcepub fn scheduling_policy_arn(self, input: impl Into<String>) -> Self
pub fn scheduling_policy_arn(self, input: impl Into<String>) -> Self
Amazon Resource Name (ARN) of the fair-share scheduling policy. Once a job queue is created, the fair-share scheduling policy can be replaced but not removed. The format is aws:Partition:batch:Region:Account:scheduling-policy/Name . For example, aws:aws:batch:us-west-2:123456789012:scheduling-policy/MySchedulingPolicy.
Sourcepub fn set_scheduling_policy_arn(self, input: Option<String>) -> Self
pub fn set_scheduling_policy_arn(self, input: Option<String>) -> Self
Amazon Resource Name (ARN) of the fair-share scheduling policy. Once a job queue is created, the fair-share scheduling policy can be replaced but not removed. The format is aws:Partition:batch:Region:Account:scheduling-policy/Name . For example, aws:aws:batch:us-west-2:123456789012:scheduling-policy/MySchedulingPolicy.
Sourcepub fn get_scheduling_policy_arn(&self) -> &Option<String>
pub fn get_scheduling_policy_arn(&self) -> &Option<String>
Amazon Resource Name (ARN) of the fair-share scheduling policy. Once a job queue is created, the fair-share scheduling policy can be replaced but not removed. The format is aws:Partition:batch:Region:Account:scheduling-policy/Name . For example, aws:aws:batch:us-west-2:123456789012:scheduling-policy/MySchedulingPolicy.
Sourcepub fn priority(self, input: i32) -> Self
pub fn priority(self, input: i32) -> Self
The priority of the job queue. Job queues with a higher priority (or a higher integer value for the priority parameter) are evaluated first when associated with the same compute environment. Priority is determined in descending order. For example, a job queue with a priority value of 10 is given scheduling preference over a job queue with a priority value of 1. All of the compute environments must be either EC2 (EC2 or SPOT) or Fargate (FARGATE or FARGATE_SPOT). EC2 and Fargate compute environments can't be mixed.
Sourcepub fn set_priority(self, input: Option<i32>) -> Self
pub fn set_priority(self, input: Option<i32>) -> Self
The priority of the job queue. Job queues with a higher priority (or a higher integer value for the priority parameter) are evaluated first when associated with the same compute environment. Priority is determined in descending order. For example, a job queue with a priority value of 10 is given scheduling preference over a job queue with a priority value of 1. All of the compute environments must be either EC2 (EC2 or SPOT) or Fargate (FARGATE or FARGATE_SPOT). EC2 and Fargate compute environments can't be mixed.
Sourcepub fn get_priority(&self) -> &Option<i32>
pub fn get_priority(&self) -> &Option<i32>
The priority of the job queue. Job queues with a higher priority (or a higher integer value for the priority parameter) are evaluated first when associated with the same compute environment. Priority is determined in descending order. For example, a job queue with a priority value of 10 is given scheduling preference over a job queue with a priority value of 1. All of the compute environments must be either EC2 (EC2 or SPOT) or Fargate (FARGATE or FARGATE_SPOT). EC2 and Fargate compute environments can't be mixed.
Sourcepub fn compute_environment_order(self, input: ComputeEnvironmentOrder) -> Self
pub fn compute_environment_order(self, input: ComputeEnvironmentOrder) -> Self
Appends an item to computeEnvironmentOrder.
To override the contents of this collection use set_compute_environment_order.
Details the set of compute environments mapped to a job queue and their order relative to each other. This is one of the parameters used by the job scheduler to determine which compute environment runs a given job. Compute environments must be in the VALID state before you can associate them with a job queue. All of the compute environments must be either EC2 (EC2 or SPOT) or Fargate (FARGATE or FARGATE_SPOT). EC2 and Fargate compute environments can't be mixed.
All compute environments that are associated with a job queue must share the same architecture. Batch doesn't support mixing compute environment architecture types in a single job queue.
Sourcepub fn set_compute_environment_order(
self,
input: Option<Vec<ComputeEnvironmentOrder>>,
) -> Self
pub fn set_compute_environment_order( self, input: Option<Vec<ComputeEnvironmentOrder>>, ) -> Self
Details the set of compute environments mapped to a job queue and their order relative to each other. This is one of the parameters used by the job scheduler to determine which compute environment runs a given job. Compute environments must be in the VALID state before you can associate them with a job queue. All of the compute environments must be either EC2 (EC2 or SPOT) or Fargate (FARGATE or FARGATE_SPOT). EC2 and Fargate compute environments can't be mixed.
All compute environments that are associated with a job queue must share the same architecture. Batch doesn't support mixing compute environment architecture types in a single job queue.
Sourcepub fn get_compute_environment_order(
&self,
) -> &Option<Vec<ComputeEnvironmentOrder>>
pub fn get_compute_environment_order( &self, ) -> &Option<Vec<ComputeEnvironmentOrder>>
Details the set of compute environments mapped to a job queue and their order relative to each other. This is one of the parameters used by the job scheduler to determine which compute environment runs a given job. Compute environments must be in the VALID state before you can associate them with a job queue. All of the compute environments must be either EC2 (EC2 or SPOT) or Fargate (FARGATE or FARGATE_SPOT). EC2 and Fargate compute environments can't be mixed.
All compute environments that are associated with a job queue must share the same architecture. Batch doesn't support mixing compute environment architecture types in a single job queue.
Sourcepub fn job_state_time_limit_actions(
self,
input: JobStateTimeLimitAction,
) -> Self
pub fn job_state_time_limit_actions( self, input: JobStateTimeLimitAction, ) -> Self
Appends an item to jobStateTimeLimitActions.
To override the contents of this collection use set_job_state_time_limit_actions.
The set of actions that Batch perform on jobs that remain at the head of the job queue in the specified state longer than specified times. Batch will perform each action after maxTimeSeconds has passed. (Note: The minimum value for maxTimeSeconds is 600 (10 minutes) and its maximum value is 86,400 (24 hours).)
Sourcepub fn set_job_state_time_limit_actions(
self,
input: Option<Vec<JobStateTimeLimitAction>>,
) -> Self
pub fn set_job_state_time_limit_actions( self, input: Option<Vec<JobStateTimeLimitAction>>, ) -> Self
The set of actions that Batch perform on jobs that remain at the head of the job queue in the specified state longer than specified times. Batch will perform each action after maxTimeSeconds has passed. (Note: The minimum value for maxTimeSeconds is 600 (10 minutes) and its maximum value is 86,400 (24 hours).)
Sourcepub fn get_job_state_time_limit_actions(
&self,
) -> &Option<Vec<JobStateTimeLimitAction>>
pub fn get_job_state_time_limit_actions( &self, ) -> &Option<Vec<JobStateTimeLimitAction>>
The set of actions that Batch perform on jobs that remain at the head of the job queue in the specified state longer than specified times. Batch will perform each action after maxTimeSeconds has passed. (Note: The minimum value for maxTimeSeconds is 600 (10 minutes) and its maximum value is 86,400 (24 hours).)
Trait Implementations§
Source§impl Clone for UpdateJobQueueFluentBuilder
impl Clone for UpdateJobQueueFluentBuilder
Source§fn clone(&self) -> UpdateJobQueueFluentBuilder
fn clone(&self) -> UpdateJobQueueFluentBuilder
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateJobQueueFluentBuilder
impl !RefUnwindSafe for UpdateJobQueueFluentBuilder
impl Send for UpdateJobQueueFluentBuilder
impl Sync for UpdateJobQueueFluentBuilder
impl Unpin for UpdateJobQueueFluentBuilder
impl !UnwindSafe for UpdateJobQueueFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);