Skip to main content

Outcome

Enum Outcome 

Source
#[non_exhaustive]
pub enum Outcome { Answered { position: u64, }, Exhausted { position: u64, }, Skipped { position: u64, }, Withheld { position: u64, }, Unreachable { position: u64, }, Interrupted, Unasked, Unroutable, Undecided, }
Expand description

What became of one target in one sitting.

Settled variants carry the target’s position in the plan’s enumeration; see PlannedTarget.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

Answered

The target answered. Settled.

Fields

§position: u64

Its position in the plan.

§

Exhausted

The retry budget was spent without an answer. Settled, since waiting longer could not have changed it.

Fields

§position: u64

Its position in the plan.

§

Skipped

Its host answered nothing in the liveness pass, so no probe was owed.

Settled, and the one settled outcome no probe was sent for. The scan asked whether the host was there as many times as its policy allows and heard nothing, which is what separates this from Undecided.

A resumed scan does not revisit these ports even if the host answers next time: the job found the host down, and asking again is a new scan, as JournalManifest says about a plan that has moved. ZondConfig::assume_up opts out.

Fields

§position: u64

Its position in the plan.

§

Withheld

Its address answers from the hardware of a machine the exclusion policy names, so no probe was allowed.

Settled, and like Skipped sent nothing. This host’s neighbour tables tied the address to that machine before anything was sent; see the machine an address names. A resume does not ask it either, whatever the tables say by then, since an exclusion may only err towards withholding more.

Fields

§position: u64

Its position in the plan.

§

Unreachable

Its address was filed as one this machine cannot reach: no route or source address led there, a route was refused by its type, or the neighbour never answered address resolution.

Settled, though nothing was sent. Asking again within the job would draw the same answer from this machine’s routing, and left unsettled every target at such an address would keep a finished job resumable. A route that appears later is a reason for a new scan.

Recorded when the address is filed, over every target the plan numbers at it. That is what separates it from Unroutable, the one target a scanner could not send, counted as it happens. See ScanContext::record_unroutable.

Fields

§position: u64

Its position in the plan.

§

Interrupted

Outstanding mid-retry-schedule when the scan stopped.

§

Unasked

No probe was sent: the target was still queued when the scan stopped, its host had already spent its own budget, or this machine’s sender refused the send.

§

Unroutable

No scanner spoke its protocol, or this machine refused to send the probe. Usually a missing privilege or a local fault, which can differ between sittings. A target whose address the scan then files as unreachable is settled over this, as Unreachable.

§

Undecided

The liveness pass reached no verdict on its host, so it was neither probed nor written off.

The pass stopped before or while asking, had no strategy that could ask, or was refused the range. None of those is silence, so it stays unsettled and the next sitting’s liveness pass asks about the host again.

Implementations§

Source§

impl Outcome

Source

pub fn settled_position(self) -> Option<u64>

The position a resume may skip, or None where the scan did not earn one.

Source

pub fn is_settled(self) -> bool

Whether a resume may skip this target.

Source

pub fn name(self) -> &'static str

The wire name, for diagnostics and for reporting a sitting’s shape.

Trait Implementations§

Source§

impl Clone for Outcome

Source§

fn clone(&self) -> Self

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Copy for Outcome

Source§

impl Debug for Outcome

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Eq for Outcome

Source§

impl Hash for Outcome

Source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · Source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
Source§

impl Ord for Outcome

Source§

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 (const: unstable) · Source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 (const: unstable) · Source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 (const: unstable) · Source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized,

Restrict a value to a certain interval. Read more
Source§

fn clamp_to<R>(self, range: R) -> Self
where Self: Sized, R: ClampBounds<Self>,

🔬This is a nightly-only experimental API. (clamp_to)
Restrict a value to a certain range. Read more
Source§

impl PartialEq for Outcome

Source§

fn eq(&self, other: &Self) -> bool

Equality operator ==. Read more
1.0.0 (const: unstable) · Source§

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=. Read more
Source§

impl PartialOrd for Outcome

Source§

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 (const: unstable) · Source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 (const: unstable) · Source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 (const: unstable) · Source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 (const: unstable) · Source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
Source§

impl StructuralPartialEq for Outcome

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<'a, T, E> AsTaggedExplicit<'a, E> for T
where T: 'a,

Source§

fn explicit(self, class: Class, tag: u32) -> TaggedParser<'a, Explicit, Self, E>

Source§

impl<'a, T, E> AsTaggedImplicit<'a, E> for T
where T: 'a,

Source§

fn implicit( self, class: Class, constructed: bool, tag: u32, ) -> TaggedParser<'a, Implicit, Self, E>

Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<Q, K> Comparable<K> for Q
where Q: Ord + ?Sized, K: Borrow<Q> + ?Sized,

Source§

fn compare(&self, key: &K) -> Ordering

Compare self to key and return their ordering.
Source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

Source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
Source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

Source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<T> Pointable for T

Source§

const ALIGN: usize

The alignment of pointer.
Source§

type Init = T

The type for initializers.
Source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
Source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
Source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
Source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<T> PolicyExt for T
where T: ?Sized,

Source§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow only if self and other return Action::Follow. Read more
Source§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow if either self or other returns Action::Follow. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more