Struct zng_layout::unit::euclid::SideOffsets2D

#[repr(C)]pub struct SideOffsets2D<T, U> {
    pub top: T,
    pub right: T,
    pub bottom: T,
    pub left: T,
    /* private fields */
}

Expand description

A group of 2D side offsets, which correspond to top/right/bottom/left for borders, padding, and margins in CSS, optionally tagged with a unit.

Fields§

§top: T§right: T§bottom: T§left: T

Implementations§

impl<T, U> SideOffsets2D<T, U>

pub const fn new(top: T, right: T, bottom: T, left: T) -> SideOffsets2D<T, U>

Constructor taking a scalar for each side.

Sides are specified in top-right-bottom-left order following CSS’s convention.

pub fn from_lengths( top: Length<T, U>, right: Length<T, U>, bottom: Length<T, U>, left: Length<T, U> ) -> SideOffsets2D<T, U>

Constructor taking a typed Length for each side.

Sides are specified in top-right-bottom-left order following CSS’s convention.

pub fn from_vectors_outer( min: Vector2D<T, U>, max: Vector2D<T, U> ) -> SideOffsets2D<T, U>
where T: Neg<Output = T>,

Construct side offsets from min and a max vector offsets.

The outer rect of the resulting side offsets is equivalent to translating a rectangle’s upper-left corner with the min vector and translating the bottom-right corner with the max vector.

pub fn from_vectors_inner( min: Vector2D<T, U>, max: Vector2D<T, U> ) -> SideOffsets2D<T, U>
where T: Neg<Output = T>,

Construct side offsets from min and a max vector offsets.

The inner rect of the resulting side offsets is equivalent to translating a rectangle’s upper-left corner with the min vector and translating the bottom-right corner with the max vector.

pub fn zero() -> SideOffsets2D<T, U>
where T: Zero,

Constructor, setting all sides to zero.

pub fn is_zero(&self) -> bool
where T: Zero + PartialEq,

Returns true if all side offsets are zero.

pub fn new_all_same(all: T) -> SideOffsets2D<T, U>
where T: Copy,

Constructor setting the same value to all sides, taking a scalar value directly.

pub fn from_length_all_same(all: Length<T, U>) -> SideOffsets2D<T, U>
where T: Copy,

Constructor setting the same value to all sides, taking a typed Length.

pub fn horizontal(&self) -> T
where T: Copy + Add<Output = T>,

pub fn vertical(&self) -> T
where T: Copy + Add<Output = T>,

Trait Implementations§

impl<T, U> Add for SideOffsets2D<T, U>
where T: Add<Output = T>,

type Output = SideOffsets2D<T, U>

The resulting type after applying the + operator.

fn add(self, other: SideOffsets2D<T, U>) -> SideOffsets2D<T, U>

Performs the + operation. Read more

impl<T, U> AddAssign for SideOffsets2D<T, U>
where T: AddAssign,

fn add_assign(&mut self, other: SideOffsets2D<T, U>)

Performs the += operation. Read more

impl<T, U> Clone for SideOffsets2D<T, U>
where T: Clone,

fn clone(&self) -> SideOffsets2D<T, U>

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl<T, U> Debug for SideOffsets2D<T, U>
where T: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl<T, U> Default for SideOffsets2D<T, U>
where T: Default,

fn default() -> SideOffsets2D<T, U>

Returns the “default value” for a type. Read more

impl<'de, T, U> Deserialize<'de> for SideOffsets2D<T, U>
where T: Deserialize<'de>,

fn deserialize<D>( deserializer: D ) -> Result<SideOffsets2D<T, U>, <D as Deserializer<'de>>::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more

impl<T, U1, U2> Div<Scale<T, U1, U2>> for SideOffsets2D<T, U2>
where T: Copy + Div,

type Output = SideOffsets2D<<T as Div>::Output, U1>

The resulting type after applying the / operator.

fn div( self, scale: Scale<T, U1, U2> ) -> <SideOffsets2D<T, U2> as Div<Scale<T, U1, U2>>>::Output

Performs the / operation. Read more

impl<T, U> Div<T> for SideOffsets2D<T, U>
where T: Copy + Div,

type Output = SideOffsets2D<<T as Div>::Output, U>

The resulting type after applying the / operator.

fn div(self, scale: T) -> <SideOffsets2D<T, U> as Div<T>>::Output

Performs the / operation. Read more

impl<T, U> DivAssign<Scale<T, U, U>> for SideOffsets2D<T, U>
where T: Copy + DivAssign,

fn div_assign(&mut self, other: Scale<T, U, U>)

Performs the /= operation. Read more

impl<T, U> DivAssign<T> for SideOffsets2D<T, U>
where T: Copy + DivAssign,

fn div_assign(&mut self, other: T)

Performs the /= operation. Read more

impl<T, U> From<SideOffsets2D<T, U>> for SideOffsets2D<T, U>

fn from(value: SideOffsets2D<T, U>) -> SideOffsets2D<T, U>

Converts to this type from the input type.

impl<T, U> From<SideOffsets2D<T, U>> for SideOffsets2D<T, U>

fn from(value: SideOffsets2D<T, U>) -> SideOffsets2D<T, U>

Converts to this type from the input type.

impl<T, U> Hash for SideOffsets2D<T, U>
where T: Hash,

fn hash<H>(&self, h: &mut H)
where H: Hasher,

Feeds this value into the given Hasher. Read more

1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more

impl<T, U1, U2> Mul<Scale<T, U1, U2>> for SideOffsets2D<T, U1>
where T: Copy + Mul,

type Output = SideOffsets2D<<T as Mul>::Output, U2>

The resulting type after applying the * operator.

fn mul( self, scale: Scale<T, U1, U2> ) -> <SideOffsets2D<T, U1> as Mul<Scale<T, U1, U2>>>::Output

Performs the * operation. Read more

impl<T, U> Mul<T> for SideOffsets2D<T, U>
where T: Copy + Mul,

type Output = SideOffsets2D<<T as Mul>::Output, U>

The resulting type after applying the * operator.

fn mul(self, scale: T) -> <SideOffsets2D<T, U> as Mul<T>>::Output

Performs the * operation. Read more

impl<T, U> MulAssign<Scale<T, U, U>> for SideOffsets2D<T, U>
where T: Copy + MulAssign,

fn mul_assign(&mut self, other: Scale<T, U, U>)

Performs the *= operation. Read more

impl<T, U> MulAssign<T> for SideOffsets2D<T, U>
where T: Copy + MulAssign,

fn mul_assign(&mut self, other: T)

Performs the *= operation. Read more

impl<T, U> Neg for SideOffsets2D<T, U>
where T: Neg<Output = T>,

type Output = SideOffsets2D<T, U>

The resulting type after applying the - operator.

fn neg(self) -> SideOffsets2D<T, U>

Performs the unary - operation. Read more

impl<T, U> PartialEq for SideOffsets2D<T, U>
where T: PartialEq,

fn eq(&self, other: &SideOffsets2D<T, U>) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T, U> Serialize for SideOffsets2D<T, U>
where T: Serialize,

fn serialize<S>( &self, serializer: S ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>
where S: Serializer,

Serialize this value into the given Serde serializer. Read more

impl<T, U> Sub for SideOffsets2D<T, U>
where T: Sub<Output = T>,

type Output = SideOffsets2D<T, U>

The resulting type after applying the - operator.

fn sub(self, other: SideOffsets2D<T, U>) -> SideOffsets2D<T, U>

Performs the - operation. Read more

impl<T, U> SubAssign for SideOffsets2D<T, U>
where T: SubAssign,

fn sub_assign(&mut self, other: SideOffsets2D<T, U>)

Performs the -= operation. Read more

impl<T, U> Transitionable for SideOffsets2D<T, U>
where T: Transitionable, U: Send + Sync + Any,

fn lerp(self, to: &SideOffsets2D<T, U>, step: Factor) -> SideOffsets2D<T, U>

Sample the linear interpolation from self -> to by step.

impl<T, U> Zeroable for SideOffsets2D<T, U>
where T: Zeroable,

fn zeroed() -> Self

Calls zeroed. Read more

impl<T, U> Copy for SideOffsets2D<T, U>
where T: Copy,

impl<T, U> Eq for SideOffsets2D<T, U>
where T: Eq,

impl<T, U> Pod for SideOffsets2D<T, U>
where T: Pod, U: 'static,

Auto Trait Implementations§

impl<T, U> Freeze for SideOffsets2D<T, U>
where T: Freeze,

impl<T, U> RefUnwindSafe for SideOffsets2D<T, U>
where T: RefUnwindSafe, U: RefUnwindSafe,

impl<T, U> Send for SideOffsets2D<T, U>
where T: Send, U: Send,

impl<T, U> Sync for SideOffsets2D<T, U>
where T: Sync, U: Sync,

impl<T, U> Unpin for SideOffsets2D<T, U>
where T: Unpin, U: Unpin,

impl<T, U> UnwindSafe for SideOffsets2D<T, U>
where T: UnwindSafe, U: UnwindSafe,

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> AnyVarValue for T
where T: VarValue,

fn as_any(&self) -> &(dyn Any + 'static)

Access to dyn Any methods.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Access to mut dyn Any methods.

fn clone_boxed(&self) -> Box<dyn AnyVarValue>

Clone the value.

fn clone_boxed_var(&self) -> Box<dyn AnyVar>

Clone the value into a new boxed LocalVar<Self>.

fn into_any(self: Box<T>) -> Box<dyn Any>

Access to Box<dyn Any> methods.

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CheckedBitPattern for T
where T: AnyBitPattern,

type Bits = T

Self must have the same layout as the specified Bits except for the possible invalid bit patterns being checked during is_valid_bit_pattern.

fn is_valid_bit_pattern(_bits: &T) -> bool

If this function returns true, then it must be valid to reinterpret bits as &Self.

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoVar<T> for T
where T: VarValue,

type Var = LocalVar<T>

Variable type that will wrap the T value. Read more

fn into_var(self) -> <T as IntoVar<T>>::Var

Converts the source value into a var.

fn into_boxed_var(self) -> Box<dyn VarBoxed<T>>
where Self: Sized,

Converts into BoxedVar<T>. Read more

impl<T> Pointable for T

const ALIGN: usize = _

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

impl<T> AnyBitPattern for T
where T: Pod,

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

impl<T> IntoValue<T> for T
where T: VarValue,

impl<T> NoUninit for T
where T: Pod,

impl<T> VarValue for T
where T: Debug + Clone + Any + PartialEq + Send + Sync,