Struct BigWorldDistance 

pub struct BigWorldDistance(/* private fields */);

Distance in the coordinate units GameParams uses (1 unit = 30 meters): consumable distShip/distTorpedo, projectile maxDist, and the other range fields read off the ship dict.

The 30 is exact against the port. Hydroacoustic Search’s C_4_7 variant carries distShip = 133.3333, and its in-game ship-detection range is 4.0 km; Black’s radar carries distShip = 250.0 against a published 7.5 km.

Replay packet positions are not in this space. Entity positions and hit points off the wire measure 15 m per unit (WorldDistance). The two are separated by measurement, not by naming.

Unreconciled: four live call sites type packet-borne radii as this, or convert them at 30, and nothing here establishes which is right. Either they are 2x out, which would mean the minimap has been drawing meters-derived rings at half size, or WorldDistance’s 15 is. The hull half-beam measurement behind WorldDistance is the tighter of the two and needs no GameParams value, so the call sites are the likelier suspects, but nobody has checked whether a zone radius travels in the same units as a position:

• wows-battle-world/src/ingest/entities.rs (smoke radius from EntityCreate)
• wows-replays/src/analyzer/decoder/decode.rs (WardAdded radius)
• wows-toolkit/src/replay/minimap_view/tactics.rs (space_size * 30.0)
• minimap-renderer/src/renderer.rs (m / 30.0 / space_size)

Until someone measures a drawn radius against a known in-game one, treat a packet radius as unresolved rather than assuming either constant.

Implementations

impl BigWorldDistance

pub fn value(self) -> f32

pub fn to_meters(self) -> Meters

pub fn to_km(self) -> Km

Trait Implementations

impl Add for BigWorldDistance

type Output = BigWorldDistance

The resulting type after applying the + operator.

fn add(self, rhs: BigWorldDistance) -> BigWorldDistance

Performs the + operation.

impl Add<BigWorldDistance> for Meters

type Output = Meters

The resulting type after applying the + operator.

fn add(self, rhs: BigWorldDistance) -> Meters

Performs the + operation.

impl Add<Meters> for BigWorldDistance

type Output = BigWorldDistance

The resulting type after applying the + operator.

fn add(self, rhs: Meters) -> BigWorldDistance

Performs the + operation.

impl Clone for BigWorldDistance

fn clone(&self) -> BigWorldDistance

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for BigWorldDistance

impl Debug for BigWorldDistance

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for BigWorldDistance

fn default() -> BigWorldDistance

Returns the “default value” for a type.

impl Div<f32> for BigWorldDistance

type Output = BigWorldDistance

The resulting type after applying the / operator.

fn div(self, rhs: f32) -> BigWorldDistance

Performs the / operation.

impl From<f32> for BigWorldDistance

fn from(v: f32) -> Self

Converts to this type from the input type.

impl From<i32> for BigWorldDistance

fn from(v: i32) -> Self

Converts to this type from the input type.

impl Mul<f32> for BigWorldDistance

type Output = BigWorldDistance

The resulting type after applying the * operator.

fn mul(self, rhs: f32) -> BigWorldDistance

Performs the * operation.

impl PartialEq for BigWorldDistance

fn eq(&self, other: &BigWorldDistance) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl PartialEq<BigWorldDistance> for Meters

fn eq(&self, other: &BigWorldDistance) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl PartialEq<Meters> for BigWorldDistance

fn eq(&self, other: &Meters) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl PartialOrd for BigWorldDistance

fn partial_cmp(&self, other: &BigWorldDistance) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<BigWorldDistance> for Meters

fn partial_cmp(&self, other: &BigWorldDistance) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Meters> for BigWorldDistance

fn partial_cmp(&self, other: &Meters) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl StructuralPartialEq for BigWorldDistance

impl Sub for BigWorldDistance

type Output = BigWorldDistance

The resulting type after applying the - operator.

fn sub(self, rhs: BigWorldDistance) -> BigWorldDistance

Performs the - operation.

impl Sub<BigWorldDistance> for Meters

type Output = Meters

The resulting type after applying the - operator.

fn sub(self, rhs: BigWorldDistance) -> Meters

Performs the - operation.

impl Sub<Meters> for BigWorldDistance

type Output = BigWorldDistance

The resulting type after applying the - operator.

fn sub(self, rhs: Meters) -> BigWorldDistance

Performs the - operation.

impl Sum for BigWorldDistance

fn sum<I: Iterator<Item = Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.