[−]Struct wgpu_native::BufferUsage
Methods
impl BufferUsage
pub const MAP_READ: BufferUsage
pub const MAP_WRITE: BufferUsage
pub const COPY_SRC: BufferUsage
pub const COPY_DST: BufferUsage
pub const INDEX: BufferUsage
pub const VERTEX: BufferUsage
pub const UNIFORM: BufferUsage
pub const STORAGE: BufferUsage
pub const STORAGE_READ: BufferUsage
pub const INDIRECT: BufferUsage
pub const NONE: BufferUsage
pub const READ_ALL: BufferUsage
The combination of all read-only usages.
pub const WRITE_ALL: BufferUsage
The combination of all write-only and read-write usages.
pub const ORDERED: BufferUsage
The combination of all usages that the are guaranteed to be be ordered by the hardware. If a usage is not ordered, then even if it doesn't change between draw calls, there still need to be pipeline barriers inserted for synchronization.
pub const fn empty() -> BufferUsage
Returns an empty set of flags
pub const fn all() -> BufferUsage
Returns the set containing all flags.
pub const fn bits(&self) -> u32
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u32) -> Option<BufferUsage>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: u32) -> BufferUsage
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: BufferUsage) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: BufferUsage) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: BufferUsage)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: BufferUsage)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: BufferUsage)
Toggles the specified flags in-place.
pub fn set(&mut self, other: BufferUsage, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Ord for BufferUsage
fn cmp(&self, other: &BufferUsage) -> Ordering
fn max(self, other: Self) -> Self
1.21.0[src]
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
Compares and returns the minimum of two values. Read more
fn clamp(self, min: Self, max: Self) -> Self
[src]
clamp
)Restrict a value to a certain interval. Read more
impl PartialOrd<BufferUsage> for BufferUsage
fn partial_cmp(&self, other: &BufferUsage) -> Option<Ordering>
fn lt(&self, other: &BufferUsage) -> bool
fn le(&self, other: &BufferUsage) -> bool
fn gt(&self, other: &BufferUsage) -> bool
fn ge(&self, other: &BufferUsage) -> bool
impl PartialEq<BufferUsage> for BufferUsage
fn eq(&self, other: &BufferUsage) -> bool
fn ne(&self, other: &BufferUsage) -> bool
impl Extend<BufferUsage> for BufferUsage
fn extend<T: IntoIterator<Item = BufferUsage>>(&mut self, iterator: T)
impl Clone for BufferUsage
fn clone(&self) -> BufferUsage
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Eq for BufferUsage
impl Copy for BufferUsage
impl Debug for BufferUsage
impl Sub<BufferUsage> for BufferUsage
type Output = BufferUsage
The resulting type after applying the -
operator.
fn sub(self, other: BufferUsage) -> BufferUsage
Returns the set difference of the two sets of flags.
impl SubAssign<BufferUsage> for BufferUsage
fn sub_assign(&mut self, other: BufferUsage)
Disables all flags enabled in the set.
impl Not for BufferUsage
type Output = BufferUsage
The resulting type after applying the !
operator.
fn not(self) -> BufferUsage
Returns the complement of this set of flags.
impl BitAnd<BufferUsage> for BufferUsage
type Output = BufferUsage
The resulting type after applying the &
operator.
fn bitand(self, other: BufferUsage) -> BufferUsage
Returns the intersection between the two sets of flags.
impl BitOr<BufferUsage> for BufferUsage
type Output = BufferUsage
The resulting type after applying the |
operator.
fn bitor(self, other: BufferUsage) -> BufferUsage
Returns the union of the two sets of flags.
impl BitXor<BufferUsage> for BufferUsage
type Output = BufferUsage
The resulting type after applying the ^
operator.
fn bitxor(self, other: BufferUsage) -> BufferUsage
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<BufferUsage> for BufferUsage
fn bitand_assign(&mut self, other: BufferUsage)
Disables all flags disabled in the set.
impl BitOrAssign<BufferUsage> for BufferUsage
fn bitor_assign(&mut self, other: BufferUsage)
Adds the set of flags.
impl BitXorAssign<BufferUsage> for BufferUsage
fn bitxor_assign(&mut self, other: BufferUsage)
Toggles the set of flags.
impl Hash for BufferUsage
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl FromIterator<BufferUsage> for BufferUsage
fn from_iter<T: IntoIterator<Item = BufferUsage>>(iterator: T) -> BufferUsage
impl Octal for BufferUsage
impl Binary for BufferUsage
impl LowerHex for BufferUsage
impl UpperHex for BufferUsage
Auto Trait Implementations
impl Send for BufferUsage
impl Unpin for BufferUsage
impl Sync for BufferUsage
impl UnwindSafe for BufferUsage
impl RefUnwindSafe for BufferUsage
Blanket Implementations
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,