[−][src]Struct ultraviolet::vec::Wec3
Fields
x: f32x4
y: f32x4
z: f32x4
Methods
impl Wec3
[src]
pub fn new(x: f32x4, y: f32x4, z: f32x4) -> Self
[src]
pub fn broadcast(val: f32x4) -> Self
[src]
pub fn unit_x() -> Self
[src]
pub fn unit_y() -> Self
[src]
pub fn unit_z() -> Self
[src]
pub fn into_homogeneous_point(self) -> Wec4
[src]
Create a homogeneous 3d point from this vector interpreted as a point, meaning the homogeneous component will start with a value of 1.0.
pub fn into_homogeneous_vector(self) -> Wec4
[src]
Create a homogeneous 3d vector from this vector, meaning the homogeneous component will always have a value of 0.0.
pub fn from_homogeneous_point(v: Wec4) -> Self
[src]
Create a 3d point from a homogeneous 3d point, performing division by the homogeneous component. This should not be used for homogeneous 3d vectors, which will have 0 as their homogeneous component.
pub fn from_homogeneous_vector(v: Wec4) -> Self
[src]
Create a 3d vector from homogeneous 2d vector, which simply discards the homogeneous component.
pub fn dot(&self, other: Wec3) -> f32x4
[src]
pub fn wedge(&self, other: Wec3) -> WBivec3
[src]
The wedge (aka exterior) product of two vectors.
This operation results in a bivector, which represents
the plane parallel to the two vectors, and which has a
'oriented area' equal to the parallelogram created by extending
the two vectors, oriented such that the positive direction is the
one which would move self
closer to other
.
pub fn geom(&self, other: Wec3) -> WRotor3
[src]
The geometric product of this and another vector, which is defined as the sum of the dot product and the wedge product.
This operation results in a 'rotor', named as such as it may define
a rotation. The rotor which results from the geometric product
will rotate in the plane parallel to the two vectors, by twice the angle between
them and in the opposite direction (i.e. it will rotate in the direction that would
bring other
towards self
, and rotate in that direction by twice the angle between them).
pub fn rotate_by(&mut self, rotor: WRotor3)
[src]
pub fn rotated_by(self, rotor: WRotor3) -> Self
[src]
pub fn cross(&self, other: Wec3) -> Self
[src]
pub fn reflect(&mut self, normal: Wec3)
[src]
pub fn reflected(&self, normal: Wec3) -> Self
[src]
pub fn mag_sq(&self) -> f32x4
[src]
pub fn mag(&self) -> f32x4
[src]
pub fn normalize(&mut self)
[src]
pub fn normalized(&self) -> Self
[src]
pub fn mul_add(&self, mul: Wec3, add: Wec3) -> Self
[src]
pub fn abs(&self) -> Self
[src]
pub fn clamp(&mut self, min: Self, max: Self)
[src]
pub fn clamped(self, min: Self, max: Self) -> Self
[src]
pub fn map<F>(&self, f: F) -> Self where
F: Fn(f32x4) -> f32x4,
[src]
F: Fn(f32x4) -> f32x4,
pub fn apply<F>(&mut self, f: F) where
F: Fn(f32x4) -> f32x4,
[src]
F: Fn(f32x4) -> f32x4,
pub fn max_by_component(self, other: Self) -> Self
[src]
pub fn min_by_component(self, other: Self) -> Self
[src]
pub fn component_max(&self) -> f32x4
[src]
pub fn component_min(&self) -> f32x4
[src]
pub fn zero() -> Self
[src]
pub fn one() -> Self
[src]
pub fn xy(&self) -> Wec2
[src]
pub fn xyzw(&self) -> Wec4
[src]
pub fn layout() -> Layout
[src]
pub fn as_array(&self) -> &[f32x4; 3]
[src]
pub fn as_slice(&self) -> &[f32x4]
[src]
pub fn as_byte_slice(&self) -> &[u8]
[src]
pub fn as_mut_slice(&mut self) -> &mut [f32x4]
[src]
pub fn as_mut_byte_slice(&mut self) -> &mut [u8]
[src]
pub fn as_ptr(&self) -> *const f32x4
[src]
Returns a constant unsafe pointer to the underlying data in the underlying type. This function is safe because all types here are repr(C) and can be represented as their underlying type.
Safety
It is up to the caller to correctly use this pointer and its bounds.
pub fn as_mut_ptr(&mut self) -> *mut f32x4
[src]
Returns a mutable unsafe pointer to the underlying data in the underlying type. This function is safe because all types here are repr(C) and can be represented as their underlying type.
Safety
It is up to the caller to correctly use this pointer and its bounds.
impl Wec3
[src]
pub fn new_splat(x: f32, y: f32, z: f32) -> Self
[src]
pub fn splat(vec: Vec3) -> Self
[src]
pub fn merge(mask: f32x4, tru: Self, fals: Self) -> Self
[src]
Merge two vectors together lanewise using mask
as a mask.
This is essentially a bitwise merge operation, such that any point where
there is a 1 bit in mask
, the output will put the bit from tru
, while
where there is a 0 bit in mask
, the output will put the bit from fals
pub fn refract(&mut self, normal: Self, eta: f32x4)
[src]
pub fn refracted(&self, normal: Self, eta: f32x4) -> Self
[src]
Trait Implementations
impl Add<Wec3> for Wec3
[src]
type Output = Self
The resulting type after applying the +
operator.
fn add(self, rhs: Wec3) -> Self
[src]
impl AddAssign<Wec3> for Wec3
[src]
fn add_assign(&mut self, rhs: Wec3)
[src]
impl Clone for Wec3
[src]
impl Copy for Wec3
[src]
impl Debug for Wec3
[src]
impl Default for Wec3
[src]
impl Div<Wec3> for Wec3
[src]
type Output = Self
The resulting type after applying the /
operator.
fn div(self, rhs: Wec3) -> Self
[src]
impl Div<f32x4> for Wec3
[src]
type Output = Wec3
The resulting type after applying the /
operator.
fn div(self, rhs: f32x4) -> Wec3
[src]
impl DivAssign<Wec3> for Wec3
[src]
fn div_assign(&mut self, rhs: Wec3)
[src]
impl DivAssign<f32x4> for Wec3
[src]
fn div_assign(&mut self, rhs: f32x4)
[src]
impl<'_> From<&'_ [f32x4; 3]> for Wec3
[src]
impl<'_> From<&'_ (f32x4, f32x4, f32x4)> for Wec3
[src]
impl<'_> From<&'_ mut [f32x4; 3]> for Wec3
[src]
impl From<[Vec3; 4]> for Wec3
[src]
impl From<[f32x4; 3]> for Wec3
[src]
impl From<(f32x4, f32x4, f32x4)> for Wec3
[src]
impl From<Wec2> for Wec3
[src]
impl From<Wec3> for Wec2
[src]
impl From<Wec3> for (f32x4, f32x4, f32x4)
[src]
impl From<Wec3> for Wec4
[src]
impl From<Wec4> for Wec3
[src]
impl Index<usize> for Wec3
[src]
type Output = f32x4
The returned type after indexing.
fn index(&self, index: usize) -> &Self::Output
[src]
impl IndexMut<usize> for Wec3
[src]
impl Into<[Vec3; 4]> for Wec3
[src]
impl Into<[f32x4; 3]> for Wec3
[src]
impl Lerp<f32x4> for Wec3
[src]
impl Mul<Wec3> for Wat3
[src]
type Output = Wec3
The resulting type after applying the *
operator.
fn mul(self, rhs: Wec3) -> Wec3
[src]
impl Mul<Wec3> for WRotor3
[src]
type Output = Wec3
The resulting type after applying the *
operator.
fn mul(self, rhs: Wec3) -> Wec3
[src]
impl Mul<Wec3> for WIsometry3
[src]
type Output = Wec3
The resulting type after applying the *
operator.
fn mul(self, vec: Wec3) -> Wec3
[src]
impl Mul<Wec3> for WSimilarity3
[src]
type Output = Wec3
The resulting type after applying the *
operator.
fn mul(self, vec: Wec3) -> Wec3
[src]
impl Mul<Wec3> for Wec3
[src]
type Output = Self
The resulting type after applying the *
operator.
fn mul(self, rhs: Wec3) -> Self
[src]
impl Mul<Wec3> for f32x4
[src]
type Output = Wec3
The resulting type after applying the *
operator.
fn mul(self, rhs: Wec3) -> Wec3
[src]
impl Mul<f32x4> for Wec3
[src]
type Output = Wec3
The resulting type after applying the *
operator.
fn mul(self, rhs: f32x4) -> Wec3
[src]
impl MulAssign<Wec3> for Wec3
[src]
fn mul_assign(&mut self, rhs: Wec3)
[src]
impl MulAssign<f32x4> for Wec3
[src]
fn mul_assign(&mut self, rhs: f32x4)
[src]
impl Neg for Wec3
[src]
impl Sub<Wec3> for Wec3
[src]
type Output = Self
The resulting type after applying the -
operator.
fn sub(self, rhs: Wec3) -> Self
[src]
impl SubAssign<Wec3> for Wec3
[src]
fn sub_assign(&mut self, rhs: Wec3)
[src]
Auto Trait Implementations
impl RefUnwindSafe for Wec3
impl Send for Wec3
impl Sync for Wec3
impl Unpin for Wec3
impl UnwindSafe for Wec3
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,