1.0.0[][src]Struct twilio_async::io::Repeat

pub struct Repeat { /* fields omitted */ }

A reader which yields one byte over and over and over and over and over and...

This struct is generally created by calling repeat. Please see the documentation of repeat() for more details.

Trait Implementations

impl Read for Repeat[src]

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>[src]

Read all bytes until EOF in this source, placing them into buf. Read more

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>[src]

Read all bytes until EOF in this source, appending them to buf. Read more

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0
[src]

Read the exact number of bytes required to fill buf. Read more

Important traits for &'a mut W
fn by_ref(&mut self) -> &mut Self[src]

Creates a "by reference" adaptor for this instance of Read. Read more

Important traits for Bytes<R>
fn bytes(self) -> Bytes<Self>[src]

Transforms this Read instance to an [Iterator] over its bytes. Read more

Important traits for Chain<T, U>
fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read
[src]

Creates an adaptor which will chain this stream with another. Read more

Important traits for Take<T>
fn take(self, limit: u64) -> Take<Self>[src]

Creates an adaptor which will read at most limit bytes from it. Read more

impl Debug for Repeat
1.16.0
[src]

impl AsyncRead for Repeat[src]

fn poll_read(&mut self, buf: &mut [u8]) -> Result<Async<usize>, Error>[src]

Attempt to read from the AsyncRead into buf. Read more

fn read_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: BufMut
[src]

Pull some bytes from this source into the specified BufMut, returning how many bytes were read. Read more

fn framed<T>(self, codec: T) -> Framed<Self, T> where
    Self: AsyncWrite,
    T: Decoder + Encoder, 
[src]

Deprecated since 0.1.7:

Use tokio_codec::Decoder::framed instead

Provides a Stream and Sink interface for reading and writing to this I/O object, using Decode and Encode to read and write the raw data. Read more

fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>) where
    Self: AsyncWrite
[src]

Helper method for splitting this read/write object into two halves. Read more

Auto Trait Implementations

impl Send for Repeat

impl Sync for Repeat

Blanket Implementations

impl<T, U> Into for T where
    U: From<T>, 
[src]

impl<T> From for T[src]

impl<T, U> TryFrom for T where
    U: Into<T>, 
[src]

type Error = !

🔬 This is a nightly-only experimental API. (try_from)

The type returned in the event of a conversion error.

impl<T> Borrow for T where
    T: ?Sized
[src]

impl<T, U> TryInto for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

🔬 This is a nightly-only experimental API. (try_from)

The type returned in the event of a conversion error.

impl<T> Any for T where
    T: 'static + ?Sized
[src]

impl<T> BorrowMut for T where
    T: ?Sized
[src]

impl<R> ReadBytesExt for R where
    R: Read + ?Sized

fn read_u8(&mut self) -> Result<u8, Error>

Reads an unsigned 8 bit integer from the underlying reader. Read more

fn read_i8(&mut self) -> Result<i8, Error>

Reads a signed 8 bit integer from the underlying reader. Read more

fn read_u16<T>(&mut self) -> Result<u16, Error> where
    T: ByteOrder, 

Reads an unsigned 16 bit integer from the underlying reader. Read more

fn read_i16<T>(&mut self) -> Result<i16, Error> where
    T: ByteOrder, 

Reads a signed 16 bit integer from the underlying reader. Read more

fn read_u24<T>(&mut self) -> Result<u32, Error> where
    T: ByteOrder, 

Reads an unsigned 24 bit integer from the underlying reader. Read more

fn read_i24<T>(&mut self) -> Result<i32, Error> where
    T: ByteOrder, 

Reads a signed 24 bit integer from the underlying reader. Read more

fn read_u32<T>(&mut self) -> Result<u32, Error> where
    T: ByteOrder, 

Reads an unsigned 32 bit integer from the underlying reader. Read more

fn read_i32<T>(&mut self) -> Result<i32, Error> where
    T: ByteOrder, 

Reads a signed 32 bit integer from the underlying reader. Read more

fn read_u48<T>(&mut self) -> Result<u64, Error> where
    T: ByteOrder, 

Reads an unsigned 48 bit integer from the underlying reader. Read more

fn read_i48<T>(&mut self) -> Result<i64, Error> where
    T: ByteOrder, 

Reads a signed 48 bit integer from the underlying reader. Read more

fn read_u64<T>(&mut self) -> Result<u64, Error> where
    T: ByteOrder, 

Reads an unsigned 64 bit integer from the underlying reader. Read more

fn read_i64<T>(&mut self) -> Result<i64, Error> where
    T: ByteOrder, 

Reads a signed 64 bit integer from the underlying reader. Read more

fn read_u128<T>(&mut self) -> Result<u128, Error> where
    T: ByteOrder, 

Reads an unsigned 128 bit integer from the underlying reader. Read more

fn read_i128<T>(&mut self) -> Result<i128, Error> where
    T: ByteOrder, 

Reads a signed 128 bit integer from the underlying reader. Read more

fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
    T: ByteOrder, 

Reads an unsigned n-bytes integer from the underlying reader. Read more

fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
    T: ByteOrder, 

Reads a signed n-bytes integer from the underlying reader. Read more

fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where
    T: ByteOrder, 

Reads an unsigned n-bytes integer from the underlying reader.

fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where
    T: ByteOrder, 

Reads a signed n-bytes integer from the underlying reader.

fn read_f32<T>(&mut self) -> Result<f32, Error> where
    T: ByteOrder, 

Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more

fn read_f64<T>(&mut self) -> Result<f64, Error> where
    T: ByteOrder, 

Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more

fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more

fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more

fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more

fn read_u128_into<T>(&mut self, dst: &mut [u128]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of unsigned 128 bit integers from the underlying reader. Read more

fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of signed 16 bit integers from the underlying reader. Read more

fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of signed 32 bit integers from the underlying reader. Read more

fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of signed 64 bit integers from the underlying reader. Read more

fn read_i128_into<T>(&mut self, dst: &mut [i128]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of signed 128 bit integers from the underlying reader. Read more

fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more

fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
    T: ByteOrder, 

Deprecated since 1.2.0:

please use read_f32_into instead

DEPRECATED. Read more

fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more

fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
    T: ByteOrder, 

Deprecated since 1.2.0:

please use read_f64_into instead

DEPRECATED. Read more

impl<T> Erased for T