pub struct TailscaleProvider { /* private fields */ }Expand description
Tailscale network provider implementing NetworkProvider.
Wraps the Go sidecar (tsnet) and local TCP bridge to provide:
- Peer discovery via WatchIPNBus events
- Raw TCP dial/listen over encrypted Tailscale tunnels
- Network-level ping and health monitoring
All bridge internals (pending_dials, session tokens, binary headers) are
completely hidden. Callers interact only with plain TcpStreams and
high-level types.
Implementations§
Source§impl TailscaleProvider
impl TailscaleProvider
Sourcepub fn new(config: TailscaleConfig) -> Self
pub fn new(config: TailscaleConfig) -> Self
Create a new TailscaleProvider with the given configuration.
Does not start the provider — call start() to begin.
Source§impl TailscaleProvider
impl TailscaleProvider
Sourcepub async fn local_identity_async(&self) -> NodeIdentity
pub async fn local_identity_async(&self) -> NodeIdentity
Get the local identity (convenience alias — same as the trait method).
Retained for backwards compatibility with existing callers that used the old async version.
Sourcepub async fn local_addr_async(&self) -> PeerAddr
pub async fn local_addr_async(&self) -> PeerAddr
Get the local address (convenience alias — same as the trait method).
Retained for backwards compatibility with existing callers that used the old async version.
Trait Implementations§
Source§impl NetworkProvider for TailscaleProvider
impl NetworkProvider for TailscaleProvider
Source§async fn stop(&mut self) -> Result<(), NetworkError>
async fn stop(&mut self) -> Result<(), NetworkError>
Source§fn local_identity(&self) -> NodeIdentity
fn local_identity(&self) -> NodeIdentity
Source§fn local_addr(&self) -> PeerAddr
fn local_addr(&self) -> PeerAddr
Source§fn peer_events(&self) -> Receiver<NetworkPeerEvent>
fn peer_events(&self) -> Receiver<NetworkPeerEvent>
Source§async fn peers(&self) -> Vec<NetworkPeer>
async fn peers(&self) -> Vec<NetworkPeer>
Source§async fn dial_tcp(
&self,
addr: &str,
port: u16,
) -> Result<TcpStream, NetworkError>
async fn dial_tcp( &self, addr: &str, port: u16, ) -> Result<TcpStream, NetworkError>
Source§async fn listen_tcp(
&self,
port: u16,
) -> Result<NetworkTcpListener, NetworkError>
async fn listen_tcp( &self, port: u16, ) -> Result<NetworkTcpListener, NetworkError>
Source§async fn unlisten_tcp(&self, port: u16) -> Result<(), NetworkError>
async fn unlisten_tcp(&self, port: u16) -> Result<(), NetworkError>
Source§async fn ping(&self, addr: &str) -> Result<PingResult, NetworkError>
async fn ping(&self, addr: &str) -> Result<PingResult, NetworkError>
Source§async fn bind_udp(&self, port: u16) -> Result<NetworkUdpSocket, NetworkError>
async fn bind_udp(&self, port: u16) -> Result<NetworkUdpSocket, NetworkError>
Source§async fn health(&self) -> HealthInfo
async fn health(&self) -> HealthInfo
Source§async fn proxy_add(
&self,
config: ProxyAddParams,
) -> Result<ProxyAddResult, NetworkError>
async fn proxy_add( &self, config: ProxyAddParams, ) -> Result<ProxyAddResult, NetworkError>
Source§async fn proxy_remove(&self, id: &str) -> Result<(), NetworkError>
async fn proxy_remove(&self, id: &str) -> Result<(), NetworkError>
Source§async fn proxy_list(&self) -> Result<Vec<ProxyListEntry>, NetworkError>
async fn proxy_list(&self) -> Result<Vec<ProxyListEntry>, NetworkError>
Auto Trait Implementations§
impl !RefUnwindSafe for TailscaleProvider
impl !UnwindSafe for TailscaleProvider
impl Freeze for TailscaleProvider
impl Send for TailscaleProvider
impl Sync for TailscaleProvider
impl Unpin for TailscaleProvider
impl UnsafeUnpin for TailscaleProvider
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);