[−][src]Struct tinkerforge::analog_in_v2_bricklet::AnalogInV2Bricklet
Measures DC voltage between 0V and 42V
Methods
impl AnalogInV2Bricklet
[src]
impl AnalogInV2Bricklet
pub const DEVICE_IDENTIFIER: u16
[src]
pub const DEVICE_DISPLAY_NAME: &'static str
[src]
pub fn new(uid: &str, ip_connection: &IpConnection) -> AnalogInV2Bricklet | [src] |
Creates an object with the unique device ID uid
. This object can then be used after the IP Connection ip_connection
is connected.
pub fn get_response_expected( | [src] |
Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.
For getter functions this is enabled by default and cannot be disabled, because those
functions will always send a response. For callback configuration functions it is enabled
by default too, but can be disabled by set_response_expected
.
For setter functions it is disabled by default and can be enabled.
Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.
See set_response_expected
for the list of function ID constants available for this function.
pub fn set_response_expected( | [src] |
Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.
Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.
pub fn set_response_expected_all(&mut self, response_expected: bool) | [src] |
Changes the response expected flag for all setter and callback configuration functions of this device at once.
pub fn get_api_version(&self) -> [u8; 3] | [src] |
Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.
pub fn get_voltage_callback_receiver(&self) -> ConvertingCallbackReceiver<u16> | [src] |
This receiver is triggered periodically with the period that is set by
set_voltage_callback_period
. The parameter is the voltage of the
sensor.
Der get_voltage_callback_receiver
receiver is only triggered if the voltage has changed since
the last triggering.
pub fn get_analog_value_callback_receiver( | [src] |
This receiver is triggered periodically with the period that is set by
set_analog_value_callback_period
. The parameter is the analog
value of the sensor.
The get_analog_value_callback_receiver
receiver is only triggered if the voltage has changed
since the last triggering.
pub fn get_voltage_reached_callback_receiver( | [src] |
This receiver is triggered when the threshold as set by
set_voltage_callback_threshold
is reached.
The parameter is the voltage of the sensor.
If the threshold keeps being reached, the receiver is triggered periodically
with the period as set by set_debounce_period
.
pub fn get_analog_value_reached_callback_receiver( | [src] |
This receiver is triggered when the threshold as set by
set_analog_value_callback_threshold
is reached.
The parameter is the analog value of the sensor.
If the threshold keeps being reached, the receiver is triggered periodically
with the period as set by set_debounce_period
.
pub fn get_voltage(&self) -> ConvertingReceiver<u16> | [src] |
Returns the measured voltage. The value is in mV and between 0V and 42V. The resolution is approximately 10mV.
If you want to get the voltage periodically, it is recommended to use the
get_voltage_callback_receiver
receiver and set the period with
set_voltage_callback_period
.
pub fn get_analog_value(&self) -> ConvertingReceiver<u16> | [src] |
Returns the value as read by a 12-bit analog-to-digital converter. The value is between 0 and 4095.
If you want the analog value periodically, it is recommended to use the
get_analog_value_callback_receiver
receiver and set the period with
set_analog_value_callback_period
.
pub fn set_voltage_callback_period(&self, period: u32) -> ConvertingReceiver<()> | [src] |
Sets the period in ms with which the get_voltage_callback_receiver
receiver is triggered
periodically. A value of 0 turns the receiver off.
The get_voltage_callback_receiver
receiver is only triggered if the voltage has changed since
the last triggering.
The default value is 0.
pub fn get_voltage_callback_period(&self) -> ConvertingReceiver<u32> | [src] |
Returns the period as set by set_voltage_callback_period
.
pub fn set_analog_value_callback_period( | [src] |
Sets the period in ms with which the get_analog_value_callback_receiver
receiver is triggered
periodically. A value of 0 turns the receiver off.
The get_analog_value_callback_receiver
receiver is only triggered if the analog value has
changed since the last triggering.
The default value is 0.
pub fn get_analog_value_callback_period(&self) -> ConvertingReceiver<u32> | [src] |
Returns the period as set by set_analog_value_callback_period
.
pub fn set_voltage_callback_threshold( | [src] |
Sets the thresholds for the get_voltage_reached_callback_receiver
receiver.
The following options are possible:
Option | Description |
---|---|
'x' | Receiver is turned off |
'o' | Receiver is triggered when the voltage is outside the min and max values |
'i' | Receiver is triggered when the voltage is inside the min and max values |
'<' | Receiver is triggered when the voltage is smaller than the min value (max is ignored) |
'>' | Receiver is triggered when the voltage is greater than the min value (max is ignored) |
The default value is ('x', 0, 0).
Associated constants:
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_OFF
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_OUTSIDE
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_INSIDE
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_SMALLER
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_GREATER
pub fn get_voltage_callback_threshold( | [src] |
Returns the threshold as set by set_voltage_callback_threshold
.
Associated constants:
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_OFF
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_OUTSIDE
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_INSIDE
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_SMALLER
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_GREATER
pub fn set_analog_value_callback_threshold( | [src] |
Sets the thresholds for the get_analog_value_reached_callback_receiver
receiver.
The following options are possible:
Option | Description |
---|---|
'x' | Receiver is turned off |
'o' | Receiver is triggered when the analog value is outside the min and max values |
'i' | Receiver is triggered when the analog value is inside the min and max values |
'<' | Receiver is triggered when the analog value is smaller than the min value (max is ignored) |
'>' | Receiver is triggered when the analog value is greater than the min value (max is ignored) |
The default value is ('x', 0, 0).
Associated constants:
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_OFF
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_OUTSIDE
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_INSIDE
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_SMALLER
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_GREATER
pub fn get_analog_value_callback_threshold( | [src] |
Returns the threshold as set by set_analog_value_callback_threshold
.
Associated constants:
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_OFF
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_OUTSIDE
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_INSIDE
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_SMALLER
- ANALOG_IN_V2_BRICKLET_THRESHOLD_OPTION_GREATER
pub fn set_debounce_period(&self, debounce: u32) -> ConvertingReceiver<()> | [src] |
Sets the period in ms with which the threshold receivers
are triggered, if the thresholds
keep being reached.
The default value is 100.
pub fn get_debounce_period(&self) -> ConvertingReceiver<u32> | [src] |
Returns the debounce period as set by set_debounce_period
.
pub fn set_moving_average(&self, average: u8) -> ConvertingReceiver<()> | [src] |
Sets the length of a moving averaging__ for the voltage.
Setting the length to 1 will turn the averaging off. With less averaging, there is more noise on the data.
The range for the averaging is 1-50.
The default value is 50.
pub fn get_moving_average(&self) -> ConvertingReceiver<u8> | [src] |
Returns the length of the moving average as set by set_moving_average
.
pub fn get_identity(&self) -> ConvertingReceiver<Identity> | [src] |
Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.
The position can be 'a', 'b', 'c' or 'd'.
The device identifier numbers can be found here. |device_identifier_constant|
Trait Implementations
impl Clone for AnalogInV2Bricklet
[src]
impl Clone for AnalogInV2Bricklet
fn clone(&self) -> AnalogInV2Bricklet | [src] |
fn clone_from(&mut self, source: &Self) | 1.0.0 [src] |
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl Send for AnalogInV2Bricklet
impl Send for AnalogInV2Bricklet
impl !Sync for AnalogInV2Bricklet
impl !Sync for AnalogInV2Bricklet
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error> | [src] |
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T | [src] |
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error> | [src] |
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId | [src] |
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self