Struct SegmentDisplay4x7V2Bricklet

pub struct SegmentDisplay4x7V2Bricklet { /* private fields */ }

Four 7-segment displays with switchable dots

Implementations

impl SegmentDisplay4x7V2Bricklet

pub const DEVICE_IDENTIFIER: u16 = 2_137u16

pub const DEVICE_DISPLAY_NAME: &'static str = "Segment Display 4x7 Bricklet 2.0"

pub fn new( uid: Uid, connection: AsyncIpConnection, ) -> SegmentDisplay4x7V2Bricklet

Creates an object with the unique device ID uid. This object can then be used after the IP Connection ip_connection is connected.

pub fn get_response_expected( &mut self, fun: SegmentDisplay4x7V2BrickletFunction, ) -> Result<bool, GetResponseExpectedError>

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by set_response_expected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

See set_response_expected for the list of function ID constants available for this function.

pub fn set_response_expected( &mut self, fun: SegmentDisplay4x7V2BrickletFunction, response_expected: bool, ) -> Result<(), SetResponseExpectedError>

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

pub fn set_response_expected_all(&mut self, response_expected: bool)

Changes the response expected flag for all setter and callback configuration functions of this device at once.

pub fn get_api_version(&self) -> [u8; 3]

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

pub async fn get_counter_finished_callback_receiver( &mut self, ) -> impl Stream<Item = ()>

This receiver is triggered when the counter (see start_counter) is finished.

pub async fn set_segments( &mut self, digit0: &[bool; 8], digit1: &[bool; 8], digit2: &[bool; 8], digit3: &[bool; 8], colon: &[bool; 2], tick: bool, ) -> Result<(), TinkerforgeError>

Sets the segments of the Segment Display 4x7 Bricklet 2.0 segment-by-segment.

The data is split into the four digits, two colon dots and the tick mark.

The indices of the segments in the digit and colon parameters are as follows:

.. image:: /Images/Bricklets/bricklet_segment_display_4x7_v2_segment_index.png :scale: 100 % :alt: Indices of segments :align: center

pub async fn get_segments(&mut self) -> Result<Segments, TinkerforgeError>

Returns the segment data as set by [set_segments].

pub async fn set_brightness( &mut self, brightness: u8, ) -> Result<(), TinkerforgeError>

The brightness can be set between 0 (dark) and 7 (bright).

pub async fn get_brightness(&mut self) -> Result<u8, TinkerforgeError>

Returns the brightness as set by [set_brightness].

pub async fn set_numeric_value( &mut self, value: &[i8; 4], ) -> Result<(), TinkerforgeError>

Sets a numeric value for each of the digits. They represent:

• -2: minus sign
• -1: blank
• 0-9: 0-9
• 10: A
• 11: b
• 12: C
• 13: d
• 14: E
• 15: F

Example: A call with [-2, -1, 4, 2] will result in a display of - 42.

pub async fn set_selected_segment( &mut self, segment: u8, value: bool, ) -> Result<(), TinkerforgeError>

Turns one specified segment on or off.

The indices of the segments are as follows:

.. image:: /Images/Bricklets/bricklet_segment_display_4x7_v2_selected_segment_index.png :scale: 100 % :alt: Indices of selected segments :align: center

pub async fn get_selected_segment( &mut self, segment: u8, ) -> Result<bool, TinkerforgeError>

Returns the value of a single segment.

pub async fn start_counter( &mut self, value_from: i16, value_to: i16, increment: i16, length: u32, ) -> Result<(), TinkerforgeError>

Starts a counter with the from value that counts to the to value with the each step incremented by increment. length is the pause between each increment.

Example: If you set from to 0, to to 100, increment to 1 and length to 1000, a counter that goes from 0 to 100 with one second pause between each increment will be started.

Using a negative increment allows to count backwards.

You can stop the counter at every time by calling [set_segments] or [set_numeric_value].

pub async fn get_counter_value(&mut self) -> Result<u16, TinkerforgeError>

Returns the counter value that is currently shown on the display.

If there is no counter running a 0 will be returned.

pub async fn get_spitfp_error_count( &mut self, ) -> Result<SpitfpErrorCount, TinkerforgeError>

Returns the error count for the communication between Brick and Bricklet.

The errors are divided into

• ACK checksum errors,
• message checksum errors,
• framing errors and
• overflow errors.

The errors counts are for errors that occur on the Bricklet side. All Bricks have a similar function that returns the errors on the Brick side.

pub async fn set_bootloader_mode( &mut self, mode: u8, ) -> Result<u8, TinkerforgeError>

Sets the bootloader mode and returns the status after the requested mode change was instigated.

You can change from bootloader mode to firmware mode and vice versa. A change from bootloader mode to firmware mode will only take place if the entry function, device identifier and CRC are present and correct.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

Associated constants:

• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_STATUS_OK
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_STATUS_INVALID_MODE
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_STATUS_NO_CHANGE
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_STATUS_ENTRY_FUNCTION_NOT_PRESENT
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_STATUS_DEVICE_IDENTIFIER_INCORRECT
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_STATUS_CRC_MISMATCH

pub async fn get_bootloader_mode(&mut self) -> Result<u8, TinkerforgeError>

Returns the current bootloader mode, see [set_bootloader_mode].

Associated constants:

• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT

pub async fn set_write_firmware_pointer( &mut self, pointer: u32, ) -> Result<(), TinkerforgeError>

Sets the firmware pointer for [write_firmware]. The pointer has to be increased by chunks of size 64. The data is written to flash every 4 chunks (which equals to one page of size 256).

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

pub async fn write_firmware( &mut self, data: &[u8; 64], ) -> Result<u8, TinkerforgeError>

Writes 64 Bytes of firmware at the position as written by [set_write_firmware_pointer] before. The firmware is written to flash every 4 chunks.

You can only write firmware in bootloader mode.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

pub async fn set_status_led_config( &mut self, config: u8, ) -> Result<(), TinkerforgeError>

Sets the status LED configuration. By default the LED shows communication traffic between Brick and Bricklet, it flickers once for every 10 received data packets.

You can also turn the LED permanently on/off or show a heartbeat.

If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.

Associated constants:

• SEGMENT_DISPLAY_4X7_V2_BRICKLET_STATUS_LED_CONFIG_OFF
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_STATUS_LED_CONFIG_ON
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_HEARTBEAT
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_STATUS

pub async fn get_status_led_config(&mut self) -> Result<u8, TinkerforgeError>

Returns the configuration as set by [set_status_led_config]

Associated constants:

• SEGMENT_DISPLAY_4X7_V2_BRICKLET_STATUS_LED_CONFIG_OFF
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_STATUS_LED_CONFIG_ON
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_HEARTBEAT
• SEGMENT_DISPLAY_4X7_V2_BRICKLET_STATUS_LED_CONFIG_SHOW_STATUS

pub async fn get_chip_temperature(&mut self) -> Result<i16, TinkerforgeError>

Returns the temperature as measured inside the microcontroller. The value returned is not the ambient temperature!

The temperature is only proportional to the real temperature and it has bad accuracy. Practically it is only useful as an indicator for temperature changes.

pub async fn reset(&mut self) -> Result<(), TinkerforgeError>

Calling this function will reset the Bricklet. All configurations will be lost.

After a reset you have to create new device objects, calling functions on the existing ones will result in undefined behavior!

pub async fn write_uid(&mut self, uid: u32) -> Result<(), TinkerforgeError>

Writes a new UID into flash. If you want to set a new UID you have to decode the Base58 encoded UID string into an integer first.

We recommend that you use Brick Viewer to change the UID.

pub async fn read_uid(&mut self) -> Result<u32, TinkerforgeError>

Returns the current UID as an integer. Encode as Base58 to get the usual string version.

pub async fn get_identity(&mut self) -> Result<Identity, TinkerforgeError>

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be ‘a’, ‘b’, ‘c’, ‘d’, ‘e’, ‘f’, ‘g’ or ‘h’ (Bricklet Port). A Bricklet connected to an Isolator Bricklet is always at position ‘z’.

The device identifier numbers can be found here. |device_identifier_constant|

Trait Implementations

impl Clone for SegmentDisplay4x7V2Bricklet

fn clone(&self) -> SegmentDisplay4x7V2Bricklet

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.