Skip to main content

MapControls

Struct MapControls 

Source
pub struct MapControls {
    pub target: Vector3,
    pub distance: f32,
    pub bearing: f32,
    pub pitch: f32,
    pub min_distance: f32,
    pub max_distance: f32,
    pub max_pitch: f32,
    pub ground: f32,
    pub rotate_speed: f32,
    pub zoom_speed: f32,
}
Expand description

A camera that looks at a point on a horizontal ground plane, the way a map application’s does.

The state is the look-at point, the distance to it, a bearing and a pitch, and the camera is derived from those on every update — so a map can be put anywhere by setting four numbers, and the controls never drift.

  • Pan (ev.panning) grabs the ground: the point under the cursor stays under the cursor however far the camera is tilted.
  • Zoom (ev.wheel) moves toward the point under the cursor, not the middle of the view.
  • Rotate (ev.rotating) turns the bearing with horizontal motion and tilts with vertical motion.

Y is up. Bearing 0 looks toward −Z, and increases clockwise seen from above; pitch 0 looks straight down.

Unlike three.js’s MapControls, which is OrbitControls with the buttons swapped, this needs the cursor position, because two of its three gestures are about the point under it.

Fields§

§target: Vector3

The look-at point. Kept on the ground plane.

§distance: f32§bearing: f32

Radians clockwise from looking toward −Z.

§pitch: f32

Radians from straight down.

§min_distance: f32§max_distance: f32§max_pitch: f32§ground: f32

Height of the ground plane.

§rotate_speed: f32§zoom_speed: f32

Implementations§

Source§

impl MapControls

Source

pub fn new(target: Vector3, distance: f32) -> Self

Looking straight down at target from distance away.

Source

pub fn apply(&self, camera: &mut PerspectiveCamera)

Put camera where the state says.

Source

pub fn fit_clip_planes(&self, camera: &mut PerspectiveCamera)

Set camera’s near and far planes to what this view can see: near a fraction of the distance, far growing as the view tilts towards the horizon (capped at 1000 distances). Keeps the depth buffer’s far ÷ near — which sets its precision — near 10⁴. Call after apply.

Source

pub fn ground_point( &self, camera: &PerspectiveCamera, x: f32, y: f32, viewport: (f32, f32), ) -> Option<Vector3>

Where the ray through pixel (x, y) (top-left origin) meets the ground, or None when it points at the sky.

Source

pub fn update( &mut self, ev: PointerEvent, cursor: (f32, f32), camera: &mut PerspectiveCamera, viewport: (f32, f32), )

Apply one frame of input. cursor is where the pointer is now; the event’s dx, dy are how far it moved to get there.

Trait Implementations§

Source§

impl Clone for MapControls

Source§

fn clone(&self) -> Self

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Copy for MapControls

Source§

impl Debug for MapControls

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> Downcast for T
where T: Any,

Source§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
Source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
Source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
Source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
Source§

impl<T> Downcast<T> for T

Source§

fn downcast(&self) -> &T

Source§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

Source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send> ⓘ

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<T> PassThreading for T
where T: Send + Sync + ?Sized,

Source§

impl<T> Pointable for T

Source§

const ALIGN: usize

The alignment of pointer.
Source§

type Init = T

The type for initializers.
Source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
Source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
Source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
Source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> Upcast<T> for T

Source§

fn upcast(&self) -> Option<&T>

Source§

impl<T> WasmNotSend for T
where T: Send,

Source§

impl<T> WasmNotSendSync for T

Source§

impl<T> WasmNotSync for T
where T: Sync,

Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more