Trait tendermint::consensus::state::fmt::Display 1.0.0[−][src]
Format trait for an empty format, {}
.
Display
is similar to Debug
, but Display
is for user-facing
output, and so cannot be derived.
For more information on formatters, see the module-level documentation.
Examples
Implementing Display
on a type:
use std::fmt; struct Point { x: i32, y: i32, } impl fmt::Display for Point { fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { write!(f, "({}, {})", self.x, self.y) } } let origin = Point { x: 0, y: 0 }; assert_eq!(format!("The origin is: {}", origin), "The origin is: (0, 0)");
Required methods
pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>
[src]
Formats the value using the given formatter.
Examples
use std::fmt; struct Position { longitude: f32, latitude: f32, } impl fmt::Display for Position { fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { write!(f, "({}, {})", self.longitude, self.latitude) } } assert_eq!("(1.987, 2.983)", format!("{}", Position { longitude: 1.987, latitude: 2.983, }));
Implementations on Foreign Types
impl Display for VarError
[src]
impl Display for SystemTimeError
[src]
impl Display for SocketAddr
[src]
impl Display for Error
[src]
impl<T> Display for PoisonError<T>
[src]
impl Display for ExitStatus
[src]
impl Display for FromBytesWithNulError
[src]
impl<'_, T> Display for MutexGuard<'_, T> where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl<'_, T> Display for RwLockWriteGuard<'_, T> where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl Display for AccessError
[src]
impl Display for IntoStringError
[src]
impl Display for Ipv6Addr
[src]
Write an Ipv6Addr, conforming to the canonical style described by RFC 5952.
impl<'_, T> Display for RwLockReadGuard<'_, T> where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl Display for Backtrace
[src]
impl Display for JoinPathsError
[src]
impl Display for Ipv4Addr
[src]
impl Display for StripPrefixError
[src]
impl Display for FromVecWithNulError
[src]
impl<T> Display for TryLockError<T>
[src]
impl<'a, K, V> Display for OccupiedError<'a, K, V> where
K: Debug,
V: Debug,
[src]
K: Debug,
V: Debug,
impl<'_> Display for Display<'_>
[src]
impl Display for IpAddr
[src]
impl Display for AddrParseError
[src]
impl Display for TryRecvError
[src]
impl Display for SocketAddrV6
[src]
impl Display for RecvError
[src]
impl<T> Display for TrySendError<T>
[src]
impl Display for RecvTimeoutError
[src]
impl<T> Display for SendError<T>
[src]
impl Display for NulError
[src]
impl<W> Display for IntoInnerError<W>
[src]
impl Display for SocketAddrV4
[src]
impl Display for NonZeroU8
[src]
impl<P> Display for Pin<P> where
P: Display,
[src]
P: Display,
impl Display for ParseIntError
[src]
impl Display for i16
[src]
impl Display for u16
[src]
impl Display for ToLowercase
[src]
impl Display for Utf8Error
[src]
impl Display for f32
[src]
impl Display for Utf8Lossy
[src]
impl Display for char
[src]
impl Display for f64
[src]
impl Display for EscapeDebug
[src]
impl Display for NonZeroI16
[src]
impl Display for Infallible
[src]
impl Display for i32
[src]
impl Display for u128
[src]
impl<'a> Display for EscapeUnicode<'a>
[src]
impl<T> Display for Wrapping<T> where
T: Display,
[src]
T: Display,
impl Display for NonZeroI32
[src]
impl Display for str
[src]
impl Display for NonZeroU16
[src]
impl Display for NonZeroI128
[src]
impl Display for TryFromIntError
[src]
impl Display for NonZeroUsize
[src]
impl Display for DecodeUtf16Error
[src]
impl Display for EscapeDefault
[src]
impl<'a> Display for EscapeDebug<'a>
[src]
impl Display for usize
[src]
impl Display for TryFromSliceError
[src]
impl<'_> Display for Location<'_>
[src]
impl<'a> Display for EscapeDefault<'a>
[src]
impl Display for ParseFloatError
[src]
impl<'_> Display for PanicInfo<'_>
[src]
impl Display for i8
[src]
impl Display for i128
[src]
impl Display for BorrowError
[src]
impl<'_, T> Display for Ref<'_, T> where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl Display for u32
[src]
impl Display for NonZeroU64
[src]
impl Display for NonZeroIsize
[src]
impl<'_, T> Display for RefMut<'_, T> where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl Display for EscapeUnicode
[src]
impl Display for CharTryFromError
[src]
impl Display for LayoutError
[src]
impl Display for NonZeroI8
[src]
impl Display for u64
[src]
impl<'_, T> Display for &'_ T where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl Display for isize
[src]
impl Display for i64
[src]
impl Display for !
[src]
impl Display for BorrowMutError
[src]
impl Display for bool
[src]
impl<'_, T> Display for &'_ mut T where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl Display for u8
[src]
impl Display for AllocError
[src]
impl Display for NonZeroI64
[src]
impl Display for ParseBoolError
[src]
impl Display for NonZeroU32
[src]
impl Display for ParseCharError
[src]
impl Display for ToUppercase
[src]
impl Display for EscapeDefault
[src]
impl Display for NonZeroU128
[src]
impl Display for FromUtf16Error
[src]
impl<'_, B> Display for Cow<'_, B> where
B: Display + ToOwned + ?Sized,
<B as ToOwned>::Owned: Display,
[src]
B: Display + ToOwned + ?Sized,
<B as ToOwned>::Owned: Display,
impl Display for String
[src]
impl<T, A> Display for Box<T, A> where
A: Allocator,
T: Display + ?Sized,
[src]
A: Allocator,
T: Display + ?Sized,
impl<'a, K, V> Display for OccupiedError<'a, K, V> where
K: Debug + Ord,
V: Debug,
[src]
K: Debug + Ord,
V: Debug,
impl Display for TryReserveError
[src]
impl<T> Display for Rc<T> where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl<T> Display for Arc<T> where
T: Display + ?Sized,
[src]
T: Display + ?Sized,
impl Display for FromUtf8Error
[src]
impl<Kind> Display for Context<Kind> where
Kind: Clone + Debug + Display + Into<Box<dyn Error + 'static + Sync + Send, Global>>,
[src]
Kind: Clone + Debug + Display + Into<Box<dyn Error + 'static + Sync + Send, Global>>,
impl<Kind> Display for Error<Kind> where
Kind: Clone + Debug + Display + Into<Box<dyn Error + 'static + Sync + Send, Global>>,
[src]
Kind: Clone + Debug + Display + Into<Box<dyn Error + 'static + Sync + Send, Global>>,
impl Display for Message
[src]
impl<'a> Display for BytesOrWideString<'a>
[src]
impl<'a> Display for SymbolName<'a>
[src]
impl<'a> Display for Demangle<'a>
impl Display for DwDefaulted
impl Display for DwEnd
impl Display for DwInl
impl Display for Error
impl Display for DwLle
impl Display for DwAccess
impl Display for DwEhPe
impl Display for DwCfa
impl Display for DwForm
impl Display for DwVis
impl Display for DwAddr
impl Display for DwMacro
impl Display for DwDsc
impl Display for DwOp
impl Display for DwUt
impl Display for DwDs
impl Display for DwAte
impl Display for DwVirtuality
impl<R, Offset> Display for LineInstruction<R, Offset> where
Offset: ReaderOffset,
R: Reader<Offset = Offset>,
Offset: ReaderOffset,
R: Reader<Offset = Offset>,
impl Display for DwLne
impl Display for DwLnct
impl Display for DwLang
impl Display for DwOrd
impl Display for DwAt
impl Display for DwTag
impl Display for DwId
impl Display for DwLns
impl Display for DwCc
impl Display for DwIdx
impl Display for DwRle
impl Display for DwChildren
impl Display for Error
impl<'a> Display for dyn Expected + 'a
[src]
impl Display for Error
[src]
impl<'a> Display for Unexpected<'a>
[src]
impl Display for Kind
[src]
impl Display for EncodeError
[src]
impl Display for DecodeError
[src]
impl Display for Error
[src]
impl Display for NaiveTime
[src]
The Display
output of the naive time t
is the same as
t.format("%H:%M:%S%.f")
.
The string printed can be readily parsed via the parse
method on str
.
It should be noted that, for leap seconds not on the minute boundary, it may print a representation not distinguishable from non-leap seconds. This doesn’t matter in practice, since such leap seconds never happened. (By the time of the first leap second on 1972-06-30, every time zone offset around the world has standardized to the 5-minute alignment.)
Example
use chrono::NaiveTime; assert_eq!(format!("{}", NaiveTime::from_hms(23, 56, 4)), "23:56:04"); assert_eq!(format!("{}", NaiveTime::from_hms_milli(23, 56, 4, 12)), "23:56:04.012"); assert_eq!(format!("{}", NaiveTime::from_hms_micro(23, 56, 4, 1234)), "23:56:04.001234"); assert_eq!(format!("{}", NaiveTime::from_hms_nano(23, 56, 4, 123456)), "23:56:04.000123456");
Leap seconds may also be used.
assert_eq!(format!("{}", NaiveTime::from_hms_milli(6, 59, 59, 1_500)), "06:59:60.500");
impl Display for FixedOffset
[src]
impl<'a, I, B> Display for DelayedFormat<I> where
I: Iterator<Item = B> + Clone,
B: Borrow<Item<'a>>,
[src]
I: Iterator<Item = B> + Clone,
B: Borrow<Item<'a>>,
impl<Tz> Display for DateTime<Tz> where
Tz: TimeZone,
<Tz as TimeZone>::Offset: Display,
[src]
Tz: TimeZone,
<Tz as TimeZone>::Offset: Display,
impl Display for NaiveDateTime
[src]
The Display
output of the naive date and time dt
is the same as
dt.format("%Y-%m-%d %H:%M:%S%.f")
.
It should be noted that, for leap seconds not on the minute boundary, it may print a representation not distinguishable from non-leap seconds. This doesn’t matter in practice, since such leap seconds never happened. (By the time of the first leap second on 1972-06-30, every time zone offset around the world has standardized to the 5-minute alignment.)
Example
use chrono::NaiveDate; let dt = NaiveDate::from_ymd(2016, 11, 15).and_hms(7, 39, 24); assert_eq!(format!("{}", dt), "2016-11-15 07:39:24");
Leap seconds may also be used.
let dt = NaiveDate::from_ymd(2015, 6, 30).and_hms_milli(23, 59, 59, 1_500); assert_eq!(format!("{}", dt), "2015-06-30 23:59:60.500");
impl Display for Utc
[src]
impl Display for Weekday
[src]
impl Display for RoundingError
[src]
impl Display for NaiveDate
[src]
The Display
output of the naive date d
is the same as
d.format("%Y-%m-%d")
.
The string printed can be readily parsed via the parse
method on str
.
Example
use chrono::NaiveDate; assert_eq!(format!("{}", NaiveDate::from_ymd(2015, 9, 5)), "2015-09-05"); assert_eq!(format!("{}", NaiveDate::from_ymd( 0, 1, 1)), "0000-01-01"); assert_eq!(format!("{}", NaiveDate::from_ymd(9999, 12, 31)), "9999-12-31");
ISO 8601 requires an explicit sign for years before 1 BCE or after 9999 CE.
assert_eq!(format!("{}", NaiveDate::from_ymd( -1, 1, 1)), "-0001-01-01"); assert_eq!(format!("{}", NaiveDate::from_ymd(10000, 12, 31)), "+10000-12-31");
impl Display for ParseError
[src]
impl<Tz> Display for Date<Tz> where
Tz: TimeZone,
<Tz as TimeZone>::Offset: Display,
[src]
Tz: TimeZone,
<Tz as TimeZone>::Offset: Display,
impl Display for ParseError
[src]
impl Display for OutOfRangeError
[src]
impl Display for Duration
[src]
impl Display for SteadyTime
[src]
impl<'a> Display for TmFmt<'a>
[src]
impl Display for ParseFloatError
[src]
impl Display for InvalidOutputSize
impl Display for Url
[src]
Display the serialization of this URL.
impl Display for ParseError
[src]
impl<S> Display for Host<S> where
S: AsRef<str>,
[src]
S: AsRef<str>,
impl Display for SyntaxViolation
[src]
impl<'a> Display for PercentEncode<'a>
impl Display for Errors
impl<I> Display for Recompositions<I> where
I: Iterator<Item = char> + Clone,
I: Iterator<Item = char> + Clone,
impl<I> Display for Replacements<I> where
I: Iterator<Item = char> + Clone,
I: Iterator<Item = char> + Clone,
impl<I> Display for Decompositions<I> where
I: Iterator<Item = char> + Clone,
I: Iterator<Item = char> + Clone,
impl<'s, T> Display for SliceVec<'s, T> where
T: Display,
T: Display,
impl<A> Display for TinyVec<A> where
A: Array,
<A as Array>::Item: Display,
A: Array,
<A as Array>::Item: Display,
impl<A> Display for ArrayVec<A> where
A: Array,
<A as Array>::Item: Display,
A: Array,
<A as Array>::Item: Display,
impl Display for Error
[src]
impl Display for Error
[src]
impl Display for Error
[src]
impl Display for WeightedError
[src]
impl Display for BernoulliError
[src]
impl Display for ReadError
[src]
impl Display for Error
[src]
impl<M> Display for BitSel<M> where
M: BitMemory,
M: BitMemory,
impl<O, V> Display for BitArray<O, V> where
V: BitView,
O: BitOrder,
V: BitView,
O: BitOrder,
impl<M> Display for BitMask<M> where
M: BitMemory,
M: BitMemory,
impl<M> Display for BitTail<M> where
M: BitMemory,
M: BitMemory,
impl<O, T> Display for BitSlice<O, T> where
T: BitStore,
O: BitOrder,
T: BitStore,
O: BitOrder,
impl<M> Display for BitIdx<M> where
M: BitMemory,
M: BitMemory,
impl<T> Display for FmtPointer<T> where
T: Pointer + Display,
T: Pointer + Display,
impl<T> Display for FmtLowerHex<T> where
T: LowerHex + Display,
T: LowerHex + Display,
impl<T> Display for FmtDisplay<T> where
T: Display,
T: Display,
impl<T> Display for FmtLowerExp<T> where
T: LowerExp + Display,
T: LowerExp + Display,
impl<T> Display for FmtOctal<T> where
T: Octal + Display,
T: Octal + Display,
impl<T> Display for FmtUpperExp<T> where
T: UpperExp + Display,
T: UpperExp + Display,
impl<T> Display for FmtUpperHex<T> where
T: UpperHex + Display,
T: UpperHex + Display,
impl<T> Display for FmtBinary<T> where
T: Binary + Display,
T: Binary + Display,
impl Display for Error
[src]
impl Display for Error
[src]
impl Display for Tag
[src]
impl Display for ErrorKind
[src]
impl Display for Length
[src]
impl Display for ObjectIdentifier
[src]
impl Display for Error
[src]
impl Display for InvalidKeyLength
impl Display for MacError
impl Display for Value
[src]
pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>
[src]
Display a JSON value as a string.
let json = json!({ "city": "London", "street": "10 Downing Street" }); // Compact format: // // {"city":"London","street":"10 Downing Street"} let compact = format!("{}", json); assert_eq!(compact, "{\"city\":\"London\",\"street\":\"10 Downing Street\"}"); // Pretty format: // // { // "city": "London", // "street": "10 Downing Street" // } let pretty = format!("{:#}", json); assert_eq!(pretty, "{\n \"city\": \"London\",\n \"street\": \"10 Downing Street\"\n}");