Skip to main content

PoolMember

Struct PoolMember 

Source
pub struct PoolMember {
    pub process_name: String,
    pub state: MemberState,
    pub entered_state_at: DateTime<Utc>,
    pub allocation_ref: Option<AllocationRef>,
}
Expand description

One pool slot’s state.

Fields§

§process_name: String

metadata.name of the backing Process.

§state: MemberState

Pool member’s current slot state.

§entered_state_at: DateTime<Utc>

When the member entered the current state.

§allocation_ref: Option<AllocationRef>

If allocated: the AllocationRef holding this slot.

Implementations§

Source§

impl PoolMember

Source

pub fn state_count_fanout(members: &[Self]) -> (u32, u32, u32, u32)

Substrate primitive: single-pass closed-set fold over a [PoolMember] slice producing the (ready, allocated, spawning, returning) 4-tuple every PoolStatus seed stamps at its four counter slots. The Failed arm is a no-op (no PoolStatus counter tracks failed members — they surface via PoolPhase::Degraded instead), pinned by the closed-set match so a future variant that SHOULD count toward one of the four buckets triggers the compiler’s exhaustiveness check here rather than silently falling through.

Consumed by PoolStatus::observed. A caller that needs a single per-variant count outside the status-seed fanout should keep spelling members.iter().filter(...).count() rather than walking this 4-tuple — the fanout is shaped for the PoolStatus fill, not for arbitrary per-variant queries.

Source

pub fn process_names_set(members: &[Self]) -> HashSet<String>

Substrate primitive: single-pass closed-set collection of the process_name axis over a [PoolMember] slice into an owned HashSet<String> — the O(1)-lookup shape every spawn-arm on the workspace builds pre-collision-check against a candidate crate::pool::PoolMember::process_name produced by [tatara-pool-reconciler::naming::member_process_name].

Pre-lift the 2-line members.iter().map(|m| m.process_name.clone()).collect() chain was hand-authored at TWO sites past the ★★ PRIME- DIRECTIVE ≥ 2 duplication threshold in tatara-pool-reconciler::controller_pool, both restating the SAME process_name projection through the SAME iter → map → collect shape and both feeding a .contains (&candidate) probe:

  • reconcile_inner’s legacy allocation-driven PoolDecision::Spawn arm (desired == 0 path) — collision-set for member_process_name(&pool_name, &pool_uid, slot) per spawn slot.
  • apply_convergence_actions — collision-set for the SAME composer inside the R11 desired-count ConvergenceAction::CreateMember loop.

Post-lift both consumers share ONE substrate owner; the composed HashSet<String> still feeds the same HashSet::<String>::contains(&candidate) probe at each callsite unchanged. A future normalization step on the occupied-name axis (case-fold before insertion, a per-cluster prefix strip, deduplication against a sibling stale-name registry, exclusion of Returning/Failed members that no longer own their slot) lands at ONE substrate method rather than being restated at each callsite.

Sibling to Self::state_count_fanout on the (collection shape × slice-owned fold) axis: both primitives fold a [PoolMember] slice into one caller-shaped aggregate in a single pass, both are #[must_use], both take the slice by reference so no caller has to reshape its Vec<PoolMember> or Vec<PoolMember> slice upstream.

Theory anchor: THEORY.md §VI.1 (generation over composition — the HashSet<String> collision-set shape recurred at TWO hand-authored sites past the ★★ PRIME-DIRECTIVE ≥ 2 duplication trigger, and is lifted to ONE owner here). THEORY.md §II.1 invariant 5 (composition preserves proofs — the pins bind the axis (process_name), the aggregate shape (HashSet<String>), the empty-slice corner, and the duplicate-name deduplication semantics HashSet provides implicitly, so a regression at any of those surfaces at tests::process_names_set_* rather than as silent occupied- slot skew at either spawn arm).

Source

pub fn unallocated( process_name: impl Into<String>, state: MemberState, entered_state_at: DateTime<Utc>, ) -> Self

Substrate composer for the unallocated PoolMember seed: the 4-slot { process_name, state, entered_state_at, allocation_ref: None } fixture literal every non-Allocated-role callsite stamped by hand pre-lift.

Pre-lift the 4-slot struct literal PoolMember { process_name, state, entered_state_at, allocation_ref: None } was hand-authored at FIVE workspace-wide sites past the ★★ PRIME-DIRECTIVE ≥ 2 duplication threshold across TWO crates:

  • tatara-pool-reconciler::controller_pool::reconcile_inner — the production per-owned-Process seed built inside the for p in all_processes.items walk; entered_state_at rides in from crate::prelude::Process::observed_phase_since with the Utc::now fallback at the callsite.
  • tatara-pool-reconciler::pool_decide::tests::member — test helper for the pool decision suite; entered_state_at rides in from crate::time::seconds_ago.
  • tatara-pool-reconciler::allocation_decide::tests::member — test helper for the allocation decision suite; entered_state_at rides in from Utc::now.
  • tatara-process::pool::tests::member — test helper for the fanout / status suite; entered_state_at rides in from the epoch anchor DateTime::<Utc>::from_timestamp(0, 0).
  • tatara-process::pool::tests::named_member — test helper for the process_names_set suite; same epoch anchor.

Every one of those FIVE sites pinned allocation_ref: None verbatim — no PoolMember construction site in the workspace pairs allocation_ref: Some(<ref>) with a hand-authored 4-slot struct literal, so this composer’s None slot is safe by construction (the compiler exhaustiveness check on the struct’s four fields catches a future 5th slot addition here rather than at any of the callsites).

Post-lift every consumer writes PoolMember::unallocated(<name>, <state>, <anchor>) and shares ONE substrate owner; a future promotion of the unallocated shape (a per-cluster clock-skew guard on the entered_state_at anchor, a canonical rename of the None-slot to a typed Unallocated marker, a lint-friendly closed-set restriction to the four MemberState variants that legitimately carry no allocation_ref) lands at ONE substrate site and every downstream consumer inherits the upgrade mechanically.

impl Into<String> accepts both &str literals (every test helper site) and owned String produced by crate::prelude::Process::owned_name_or_empty (the production controller-pool site) without widening the signature.

Sibling to AllocationRef::new on the substrate-composer axis: both take impl Into<String>-gated identity slots and return their owner-type by value; AllocationRef::new owns the (name, namespace) pair, this composer owns the four-slot unallocated-member seed.

Theory anchor: THEORY.md §VI.1 (generation over composition — the 4-slot unallocated-PoolMember seed recurred at FIVE hand- authored sites past the ★★ PRIME-DIRECTIVE ≥ 2 duplication trigger, and is lifted to ONE owner here). THEORY.md §II.1 invariant 5 (composition preserves proofs — the pins bind the four-slot fill AND the allocation_ref: None invariant AND the caller-clock-injectability of entered_state_at, so a regression that drifts any surface fails at tests::pool_member_unallocated_* rather than as silent operator-facing skew between the production controller-pool seed and the three test-suite helpers on the SAME PoolMember shape).

Trait Implementations§

Source§

impl Clone for PoolMember

Source§

fn clone(&self) -> PoolMember

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for PoolMember

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl<'de> Deserialize<'de> for PoolMember

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl JsonSchema for PoolMember

Source§

fn schema_name() -> String

The name of the generated JSON Schema. Read more
Source§

fn schema_id() -> Cow<'static, str>

Returns a string that uniquely identifies the schema produced by this type. Read more
Source§

fn json_schema(generator: &mut SchemaGenerator) -> Schema

Generates a JSON Schema for this type. Read more
Source§

fn is_referenceable() -> bool

Whether JSON Schemas generated for this type should be re-used where possible using the $ref keyword. Read more
Source§

impl Serialize for PoolMember

Source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> AppData for T
where T: OptionalSend + OptionalSync + 'static + OptionalSerde,

Source§

impl<T> AppDataResponse for T
where T: OptionalSend + OptionalSync + 'static + OptionalSerde,

Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

Source§

impl<T> DynClone for T
where T: Clone,

Source§

fn __clone_box(&self, _: Private) -> *mut ()

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<T> OptionalSend for T
where T: Send + ?Sized,

Source§

impl<T> OptionalSync for T
where T: Sync + ?Sized,

Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1:

renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

Source§

fn vzip(self) -> V

Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more