Enum Error 

#[non_exhaustive]
pub enum Error {
    Io(Error),
    Usage(String),
    FormatNotEnabled(FormatId),
    UnknownFormat {
        seen: String,
    },
    AmbiguousFormat {
        candidates: String,
    },
    NotSeekable {
        format: FormatId,
    },
    SpillLimitExceeded {
        limit: u64,
    },
    ResourceLimit(String),
    Corrupt(String),
    UnsafePath {
        path: String,
        reason: &'static str,
    },
    FidelityDegraded(usize),
    EntryNotFound(String),
    Unsupported(String),
    CapabilityUnavailable {
        format: FormatId,
        available: &'static str,
        requested: &'static str,
    },
    ChainTooDeep {
        depth: usize,
    },
    NotAnArchive {
        chain: String,
    },
}

Variants (Non-exhaustive)

Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.

Io(Error)

Stuffr’s environment failed: a disk error, a permission failure, a broken pipe. Exit 1, which this project reserves for “stuffr itself failed” and nothing else.

Constructed through a hand-written From impl, not a derived one — see below Error’s own impl block. The derived #[from] was blind to whether the failing read sat above or below a codec decoder, which made a bare ? below one wrong by default; four sites had it wrong at once. crate::source::decode_side carries the whole argument.

Usage(String)

FormatNotEnabled(FormatId)

UnknownFormat

Fields

seen: String

AmbiguousFormat

Fields

candidates: String

NotSeekable

Fields

format: FormatId

SpillLimitExceeded

Fields

limit: u64

ResourceLimit(String)

Corrupt(String)

UnsafePath

Fields

path: String

reason: &'static str

FidelityDegraded(usize)

EntryNotFound(String)

Unsupported(String)

CapabilityUnavailable

Fields

format: FormatId

available: &'static str

The direction that IS available, e.g. “read”.

requested: &'static str

The direction that was asked for and is not, e.g. “written”.

ChainTooDeep

Nesting exceeded crate::probe::MAX_CHAIN_DEPTH. Names the bound so the message is actionable rather than merely a refusal.

Fields

depth: usize

NotAnArchive

The chain resolved to raw bytes with no container to open — e.g. list/test pointed at a plain codec stream, or at a file whose magic and extension both name none. Names what the input actually resolved to (chain.describe()), so “unpack this .gz” is actionable rather than a bare refusal.

Fields

chain: String

Implementations

impl Error

pub fn entry_index_out_of_range(index: usize, entries: usize) -> Self

“Entry number index does not exist; here is what does.”

One constructor rather than a format! at each raiser, because there are two routes to an out-of-range index and they must report it IDENTICALLY: a container’s own crate::ArchiveRead::by_index finds it immediately (zip, which has a central directory to check against), while a caller counting a forward walk finds it only at the end of the archive (tar, ar, cpio, and anything on a pipe). A script that could tell those apart from the message would be reading an implementation detail of the source it was handed.

Self::EntryNotFound rather than Self::Usage because the variant exists for exactly this — “you named an entry this archive does not have” — and carries the same exit code, 2. The payload is shaped to read inside that variant’s own entry \{0}` not found` wording.

Indices are 0-based throughout, so the valid range is stated explicitly rather than left to be derived from the count: 0-5 is harder to get wrong than “6 entries” is.

pub fn hardlink_not_storable(container: &str, name: &str) -> Self

A container whose caps say !stores_hardlinks was handed an EntryKind::Hardlink: refused (exit 3) before anything is written, never stored as a regular file. plan_entry_write keeps links away from such writers; this is each writer’s backstop, and the ONE wording.

pub fn exit_code(&self) -> i32

Maps to the process exit code, per the spec’s table. Lives here rather than in the CLI so it is unit-testable without a process spawn.

Exit 5 or exit 6 on an absurd header field: the rule the guards actually follow

Seven of this workspace’s guards refuse a declared header field before it can do damage, and they split across two codes. The table is exhaustive of the seven it names, NOT of every bounding check in the tree:

guard	error	exit
cpio.rs’s c_namesize ceiling	ResourceLimit	6
cpio.rs’s and zip.rs’s read_symlink_target (declared target over 65,536 bytes)	ResourceLimit	6
ar.rs’s refuse_if_over (GNU name table, BSD identifier)	ResourceLimit	6
ar.rs’s /N index past the declared name table	Corrupt	5
zip.rs’s entry payload that never delivers its declared size	Corrupt	5
zip.rs’s index that reaches no entry over a file that opens with one	Corrupt	5

The rule is a fact about what stuffr DID, not about what the input declared:

• Exit 6 — stuffr declined to ask the allocator. The field was measured against a structural ceiling and refused before anything was sized from it. Nothing was read past the header.
• Exit 5 — stuffr read the bytes and they contradict each other. No allocation was ever in question; what is wrong is the file’s agreement with itself.

It is NOT “could a bigger machine honour it”. Three of those sites used to argue that locally, and their own reproducers falsify it: cpio’s is a 274-byte file declaring a 2.6 GiB name, which no machine anywhere can deliver, and it answers 6; ar’s two guards split across 5 and 6 on the same 68-byte file. Nothing about the input’s plausibility separates them, so a caller cannot predict the code from the file — only from which guard stopped first. Each site links here rather than re-deriving a local justification, because four local derivations produced four different rules for one contract.

What a caller can still read off the code: exit 6 says a LIMIT decided the outcome, exit 5 says the FILE did and no budget changes that. The container ceilings above are fixed rather than tunable (OpenOpts carries no memory field, unlike DecodeOpts::memory_limit), so exit 6 there is not an invitation to retry with a bigger budget — it is still the honest code, because a ceiling and not the bytes is what decided.

pub fn from_decode_io(e: Error) -> Self

Classifies an io error that arose while decoding.

Malformed input becomes Error::Corrupt (exit 5); everything else stays Error::Io (exit 1). InvalidData is the convention every codec’s decoder is expected to normalise onto for malformed input; a codec whose backend disagrees adapts at its own boundary rather than this classification changing. gzip is one such codec: flate2’s pure-Rust backend actually raises InvalidInput and UnexpectedEof, never InvalidData, so gzip’s decoder wraps it in an adapter that folds both onto InvalidData before this function ever sees them.

OutOfMemory becomes Error::ResourceLimit (exit 6), not Corrupt: a codec whose dictionary allocation would exceed DecodeOpts::memory_limit is refusing to allocate, not reporting a damaged file, and exit 5 would actively mislead the caller about which of those happened. A codec that raises this kind is expected to have NOT routed it through the same InvalidData-folding adapter it uses for malformed input, the same way InvalidData above is a convention the codec opts into deliberately.

One rule here rather than a helper each codec calls: putting the decision in nine places means the natural code — a bare ? on an io::Error — silently bypasses it, and a convention whose failure mode is invisible is not a convention. Conformance property 9 enforces the codec half, that malformed input surfaces as InvalidData at all.

Lives in stuffr-core rather than in ops because Phase 2’s containers need the identical classification on their own decode paths.

Task 4b (Phase 3a’s fuzzing harness) added a fourth call site: probe.rs’s resolve_chain_deep_with re-probes a DECODED stream whenever a codec has no container above it and the path named nothing further (stdin, or an extension that ran out) — the loop documented on resolve_chain_deep’s own doc comment. That re-probe used to read through a bare ?, so a truncated zlib stream (\x78\xda\x0a, three bytes) or an empty file named .lz reported Error::Io — exit 1, “stuffr failed” — for input that is simply corrupt, while stuffr cat on the IDENTICAL bytes (via ops::decompress, whose decode read was already wired to this function) correctly exited 5. This is deliberately NOT filed as a sixth instance of exit_code’s _ => 1 wildcard misfiling a KNOWN variant (see that match’s own comment for the five it has produced): Error::Io reaching that wildcard is correct, by construction — it has no dedicated arm because the wildcard IS its arm. The bug here was upstream of exit_code entirely: the wrong variant got constructed in the first place, at a read that passed through a decoder without this classifier’s protection.

Trait Implementations

impl Debug for Error

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for Error

fn fmt(&self, __formatter: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Error for Error

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any.

fn description(&self) -> &str

👎Deprecated since 1.42.0:

use the Display impl or to_string()

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0:

replaced by Error::source, which can support downcasting

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)

Provides type-based access to context intended for error reports.

impl From<Error> for Error

The single conversion every ? on a read path passes through.

Hand-written rather than derived with thiserror’s #[from], because the derived one could not see the one fact that decides the answer: whether the read that failed sat BELOW a codec decoder (the archive’s fault) or above one (stuffr’s environment failing). crate::source::mark_decode_side records that at the read, and this is where it is spent.

Before this existed, the distinction was carried by whether the author of a given ? remembered to write map_err(Error::from_decode_io) instead — so the natural code was wrong by default, and four sites had it wrong at once (spill.rs’s ladder rung 3, lha.rs’s Lha::open, cpio.rs’s per-header read-ahead, zip.rs’s read_fixed/skip). A 21-byte zstd stream whose decoded bytes opened with ARJ’s 60 EA magic reached the first of them and reported i/o error — exit 1, “stuffr failed” — where stuffr cat on the identical bytes correctly said the archive was corrupt.

Error::from_decode_io folds only InvalidData and OutOfMemory, so this cannot mistake an environment failure for corruption even when one propagates up through a decoder: it keeps its own kind, so it stays Error::Io.

fn from(e: Error) -> Self

Converts to this type from the input type.