Struct stm32wb_hci::event::command::LeStates

pub struct LeStates(/* private fields */);

Possible LE states or state combinations for the LE Read Supported States command.

Implementations

impl LeStates

pub const NON_CONNECTABLE_ADVERTISING: Self = _

Non-connectable advertising state alone.

pub const SCANNABLE_ADVERTISING: Self = _

Scannable advertising state alone

pub const CONNECTABLE_ADVERTISING: Self = _

Connectable advertising state alone

pub const DIRECTED_ADVERTISING_HIGH_DUTY_CYCLE: Self = _

Directed advertising (high duty cycle) state alone

pub const PASSIVE_SCANNING: Self = _

Passive scanning state alone

pub const ACTIVE_SCANNING: Self = _

Active scanning state alone

pub const INITIATING: Self = _

Initianing state alone

pub const PERIPHERAL_CONNECTION: Self = _

Peripheral (slave) connection state alone

pub const NONCONN_AD_AND_PASS_SCAN: Self = _

Non-connectable advertising and passive scan states.

pub const SCAN_AD_AND_PASS_SCAN: Self = _

Scannable advertising and passive scan states

pub const CONN_AD_AND_PASS_SCAN: Self = _

Connectable advertising and passive scan states

pub const DIR_AD_HDC_AND_PASS_SCAN: Self = _

Directed advertising (high duty cycle) and passive scan states

pub const NONCONN_AD_AND_ACT_SCAN: Self = _

Non-connectable advertising and active scan states.

pub const SCAN_AD_AND_ACT_SCAN: Self = _

Scannable advertising and active scan states

pub const CONN_AD_AND_ACT_SCAN: Self = _

Connectable advertising and active scan states

pub const DIR_AD_HDC_AND_ACT_SCAN: Self = _

Directed advertising (high duty cycle) and active scan states

pub const NONCONN_AD_AND_INITIATING: Self = _

Non-connectable advertising and initiating states.

pub const SCAN_AD_AND_INITIATING: Self = _

Scannable advertising and initiating states

pub const NONCONN_AD_AND_CENTRAL_CONN: Self = _

Non-connectable advertising and central (master) connection states.

pub const SCAN_AD_AND_CENTRAL_CONN: Self = _

Scannable advertising and central (master) connection states

pub const NONCONN_AD_AND_PERIPH_CONN: Self = _

Non-connectable advertising and peripheral (slave) connection states.

pub const SCAN_AD_AND_PERIPH_CONN: Self = _

Scannable advertising and peripheral (slave) connection states

pub const PASS_SCAN_AND_INITIATING: Self = _

Passive scan and initiating states

pub const ACT_SCAN_AND_INITIATING: Self = _

Active scan and initiating states

pub const PASS_SCAN_AND_CENTRAL_CONN: Self = _

Passive scan and central (master) connection states

pub const ACT_SCAN_AND_CENTRAL_CONN: Self = _

Active scan and central (master) connection states

pub const PASS_SCAN_AND_PERIPH_CONN: Self = _

Passive scan and peripheral (slave) connection states

pub const ACT_SCAN_AND_PERIPH_CONN: Self = _

Active scan and peripheral (slave) connection states

pub const INITIATING_AND_CENTRAL_CONN: Self = _

Initiating and central (master) connection states

pub const DIRECTED_ADVERTISING_LOW_DUTY_CYCLE: Self = _

Directed advertising (low duty cycle) state alone

pub const DIR_AD_LDC_AND_PASS_SCAN: Self = _

Directed advertising (low duty cycle) and passive scan states

pub const DIR_AD_LDC_AND_ACT_SCAN: Self = _

Directed advertising (low duty cycle) and active scan states

pub const CONN_AD_AND_INITIATING: Self = _

Connectable advertising and initiating states

pub const DIR_AD_HDC_AND_INITIATING: Self = _

Directed advertising (high duty cycle) and initiating states

pub const DIR_AD_LDC_AND_INITIATING: Self = _

Directed advertising (low duty cycle) and initiating states

pub const CONN_AD_AND_CENTRAL_CONN: Self = _

Connectable advertising and central (master) connection states

pub const DIR_AD_HDC_AND_CENTRAL_CONN: Self = _

Directed advertising (high duty cycle) and central (master) states

pub const DIR_AD_LDC_AND_CENTRAL_CONN: Self = _

Directed advertising (low duty cycle) and central (master) states

pub const CONN_AD_AND_PERIPH_CONN: Self = _

Connectable advertising and peripheral (slave) connection states

pub const DIR_AD_HDC_AND_PERIPH_CONN: Self = _

Directed advertising (high duty cycle) and peripheral (slave) states

pub const DIR_AD_LDC_AND_PERIPH_CONN: Self = _

Directed advertising (low duty cycle) and peripheral (slave) states

pub const INITIATING_AND_PERIPH_CONN: Self = _

Initiating and peripheral (slave) connection states

impl LeStates

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u64

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u64) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u64) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u64) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl LeStates

pub const fn iter(&self) -> Iter<LeStates>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<LeStates>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for LeStates

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for LeStates

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = LeStates

The resulting type after applying the & operator.

impl BitAndAssign for LeStates

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for LeStates

fn bitor(self, other: LeStates) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = LeStates

The resulting type after applying the | operator.

impl BitOrAssign for LeStates

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for LeStates

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = LeStates

The resulting type after applying the ^ operator.

impl BitXorAssign for LeStates

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for LeStates

fn clone(&self) -> LeStates

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for LeStates

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for LeStates

fn default() -> LeStates

Returns the “default value” for a type.

impl Extend<LeStates> for LeStates

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for LeStates

const FLAGS: &'static [Flag<LeStates>] = _

The set of defined flags.

type Bits = u64

The underlying bits type.

fn bits(&self) -> u64

Get the underlying bits value.

fn from_bits_retain(bits: u64) -> LeStates

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<LeStates> for LeStates

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl IntoIterator for LeStates

type Item = LeStates

The type of the elements being iterated over.

type IntoIter = Iter<LeStates>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for LeStates

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for LeStates

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = LeStates

The resulting type after applying the ! operator.

impl Octal for LeStates

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for LeStates

fn eq(&self, other: &LeStates) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PublicFlags for LeStates

type Primitive = u64

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for LeStates

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = LeStates

The resulting type after applying the - operator.

impl SubAssign for LeStates

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for LeStates

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for LeStates

impl Eq for LeStates

impl StructuralEq for LeStates

impl StructuralPartialEq for LeStates