Struct stm32ral::stm32mp::peripherals::gpiok::RegisterBlock

#[repr(C)]
pub struct RegisterBlock {

    pub GPIOK_MODER: RWRegister<u32>,
    pub GPIOK_OTYPER: RWRegister<u32>,
    pub GPIOK_OSPEEDR: RWRegister<u32>,
    pub GPIOK_PUPDR: RWRegister<u32>,
    pub GPIOK_IDR: RORegister<u32>,
    pub GPIOK_ODR: RWRegister<u32>,
    pub GPIOK_BSRR: WORegister<u32>,
    pub GPIOK_LCKR: RWRegister<u32>,
    pub GPIOK_AFRL: RWRegister<u32>,
    pub GPIOK_AFRH: RWRegister<u32>,
    pub GPIOK_BRR: WORegister<u32>,
    pub GPIOK_HWCFGR10: RORegister<u32>,
    pub GPIOK_HWCFGR9: RORegister<u32>,
    pub GPIOK_HWCFGR8: RORegister<u32>,
    pub GPIOK_HWCFGR7: RORegister<u32>,
    pub GPIOK_HWCFGR6: RORegister<u32>,
    pub GPIOK_HWCFGR5: RORegister<u32>,
    pub GPIOK_HWCFGR4: RORegister<u32>,
    pub GPIOK_HWCFGR3: RORegister<u32>,
    pub GPIOK_HWCFGR2: RORegister<u32>,
    pub GPIOK_HWCFGR1: RORegister<u32>,
    pub GPIOK_HWCFGR0: RORegister<u32>,
    pub GPIOK_VERR: RORegister<u32>,
    pub GPIOK_IPIDR: RORegister<u32>,
    pub GPIOK_SIDR: RORegister<u32>,
    // some fields omitted
}

Fields

GPIOK_MODER: RWRegister<u32>

GPIO port mode register

GPIOK_OTYPER: RWRegister<u32>

GPIO port output type register

GPIOK_OSPEEDR: RWRegister<u32>

GPIO port output speed register

GPIOK_PUPDR: RWRegister<u32>

GPIO port pull-up/pull-down register

GPIOK_IDR: RORegister<u32>

GPIO port input data register

GPIOK_ODR: RWRegister<u32>

GPIO port output data register

GPIOK_BSRR: WORegister<u32>

GPIO port bit set/reset register

GPIOK_LCKR: RWRegister<u32>

This register is used to lock the configuration of the port bits when a correct write sequence is applied to bit 16 (LCKK). The value of bits [15:0] is used to lock the configuration of the GPIO. During the write sequence, the value of LCKR[15:0] must not change. When the LOCK sequence has been applied on a port bit, the value of this port bit can no longer be modified until the next MCU reset or peripheral reset. A specific write sequence is used to write to the GPIOx_LCKR register. Only word access (32-bit long) is allowed during this locking sequence. Each lock bit freezes a specific configuration register (control and alternate function registers).

GPIOK_AFRL: RWRegister<u32>

GPIO alternate function low register

GPIOK_AFRH: RWRegister<u32>

GPIO alternate function high register

GPIOK_BRR: WORegister<u32>

GPIO port bit reset register

GPIOK_HWCFGR10: RORegister<u32>

For GPIOA, B, C, D, E, F, G, H, I, J and GPIOK: For GPIOZ:

GPIOK_HWCFGR9: RORegister<u32>

For GPIOA, B, C, D, E, F, G, H, I, and GPIOJ: For GPIOK and GPIOZ:

GPIOK_HWCFGR8: RORegister<u32>

For GPIOA, B, C, D, E, F, G, H, I, and GPIOJ: For GPIOK and GPIOZ:

GPIOK_HWCFGR7: RORegister<u32>

GPIO hardware configuration register 7

GPIOK_HWCFGR6: RORegister<u32>

GPIO hardware configuration register 6

GPIOK_HWCFGR5: RORegister<u32>

GPIO hardware configuration register 5

GPIOK_HWCFGR4: RORegister<u32>

GPIO hardware configuration register 4

GPIOK_HWCFGR3: RORegister<u32>

GPIO hardware configuration register 3

GPIOK_HWCFGR2: RORegister<u32>

GPIO hardware configuration register 2

GPIOK_HWCFGR1: RORegister<u32>

GPIO hardware configuration register 1

GPIOK_HWCFGR0: RORegister<u32>

GPIO hardware configuration register 0

GPIOK_VERR: RORegister<u32>

GPIO version register

GPIOK_IPIDR: RORegister<u32>

GPIO identification register

GPIOK_SIDR: RORegister<u32>

GPIO size identification register