Struct PB13

pub struct PB13<MODE> { /* private fields */ }

Pin

Implementations

impl<MODE> PB13<MODE>

pub fn into_floating_input(self) -> PB13<Input<Floating>>

Configures the pin to operate as a floating input pin

pub fn into_pull_down_input(self) -> PB13<Input<PullDown>>

Configures the pin to operate as a pulled down input pin

pub fn into_pull_up_input(self) -> PB13<Input<PullUp>>

Configures the pin to operate as a pulled up input pin

pub fn into_analog(self) -> PB13<Analog>

Configures the pin to operate as an analog pin

pub fn into_open_drain_output(self) -> PB13<Output<OpenDrain>>

Configures the pin to operate as an open drain output pin

pub fn into_push_pull_output(self) -> PB13<Output<PushPull>>

Configures the pin to operate as an push pull output pin

pub fn set_speed(self, speed: Speed) -> Self

Set pin speed

impl<MODE> PB13<Output<MODE>>

pub fn downgrade(self) -> PB<Output<MODE>>

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

impl<MODE> PB13<Input<MODE>>

pub fn downgrade(self) -> PB<Input<MODE>>

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

Trait Implementations

impl AdcChannel for PB13<Analog>

fn setup(&mut self, adc: &mut Adc)

impl Channel<Adc> for PB13<Analog>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl<MODE> InputPin for PB13<Input<MODE>>

type Error = Infallible

Error type

fn is_high(&self) -> Result<bool, Self::Error>

Is the input pin high?

fn is_low(&self) -> Result<bool, Self::Error>

Is the input pin low?

impl<MODE> InputPin for PB13<Output<MODE>>

type Error = Infallible

Error type

fn is_high(&self) -> Result<bool, Self::Error>

Is the input pin high?

fn is_low(&self) -> Result<bool, Self::Error>

Is the input pin low?

impl<MODE> OutputPin for PB13<Output<MODE>>

type Error = Infallible

Error type

fn set_high(&mut self) -> Result<(), Self::Error>

Drives the pin high

fn set_low(&mut self) -> Result<(), Self::Error>

Drives the pin low

impl<MODE> StatefulOutputPin for PB13<Output<MODE>>

fn is_set_high(&self) -> Result<bool, Self::Error>

Is the pin in drive high mode?

fn is_set_low(&self) -> Result<bool, Self::Error>

Is the pin in drive low mode?

impl<MODE> Default for PB13<Output<MODE>>

impl PinSck<SPI2> for PB13<Input<Floating>>