[−][src]Struct stm32l1xx_hal::stm32::comp::csr::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut W
[src]
Writes raw bits to the register
pub fn tsusp(&mut self) -> _TSUSPW
[src]
Bit 31 - Suspend Timer Mode
pub fn caie(&mut self) -> _CAIEW
[src]
Bit 29 - Channel Acquisition Interrupt Enable / Clear
pub fn rch13(&mut self) -> _RCH13W
[src]
Bit 28 - Select GPIO port PC3 as re-routed ADC input channel CH13.
pub fn fch8(&mut self) -> _FCH8W
[src]
Bit 27 - Select GPIO port PB0 as fast ADC input channel CH8.
pub fn fch3(&mut self) -> _FCH3W
[src]
Bit 26 - Select GPIO port PA3 as fast ADC input channel CH3.
pub fn outsel(&mut self) -> _OUTSELW
[src]
Bits 21:23 - Comparator 2 output selection
pub fn insel(&mut self) -> _INSELW
[src]
Bits 18:20 - Inverted input selection
pub fn wndwe(&mut self) -> _WNDWEW
[src]
Bit 17 - Window mode enable
pub fn vrefouten(&mut self) -> _VREFOUTENW
[src]
Bit 16 - VREFINT output enable
pub fn speed(&mut self) -> _SPEEDW
[src]
Bit 12 - Comparator 2 speed mode
pub fn sw1(&mut self) -> _SW1W
[src]
Bit 5 - SW1 analog switch enable
pub fn cmp1en(&mut self) -> _CMP1ENW
[src]
Bit 4 - Comparator 1 enable
pub fn pd400k(&mut self) -> _PD400KW
[src]
Bit 3 - 400 kO pull-down resistor
pub fn pd10k(&mut self) -> _PD10KW
[src]
Bit 2 - 10 kO pull-down resistor
pub fn pu400k(&mut self) -> _PU400KW
[src]
Bit 1 - 400 kO pull-up resistor
pub fn pu10k(&mut self) -> _PU10KW
[src]
Bit 0 - 10 kO pull-up resistor
Auto Trait Implementations
Blanket Implementations
impl<T> From<T> for T
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,