Struct stm32h7::stm32h743::fmc::pmem::W

pub struct W(_);

Register PMEM writer

Implementations

impl W

pub fn memset(&mut self) -> MEMSET_W<'_, 0>

Bits 0:7 - Common memory x setup time These bits define the number of KCK_FMC (+1) clock cycles to set up the address before the command assertion (NWE, NOE), for NAND Flash read or write access to common memory space:

pub fn memwait(&mut self) -> MEMWAIT_W<'_, 8>

Bits 8:15 - Common memory wait time These bits define the minimum number of KCK_FMC (+1) clock cycles to assert the command (NWE, NOE), for NAND Flash read or write access to common memory space. The duration of command assertion is extended if the wait signal (NWAIT) is active (low) at the end of the programmed value of KCK_FMC:

pub fn memhold(&mut self) -> MEMHOLD_W<'_, 16>

Bits 16:23 - Common memory hold time These bits define the number of KCK_FMC clock cycles for write accesses and KCK_FMC+1 clock cycles for read accesses during which the address is held (and data for write accesses) after the command is de-asserted (NWE, NOE), for NAND Flash read or write access to common memory space:

pub fn memhiz(&mut self) -> MEMHIZ_W<'_, 24>

Bits 24:31 - Common memory x data bus Hi-Z time These bits define the number of KCK_FMC clock cycles during which the data bus is kept Hi-Z after the start of a NAND Flash write access to common memory space. This is only valid for write transactions:

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<PMEM_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<PMEM_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<PMEM_SPEC>> for W

fn from(writer: W<PMEM_SPEC>) -> Self

Converts to this type from the input type.