Type Definition stm32g4::stm32g484::rtc::cr::R [−][src]
type R = R<u32, CR>;
Reader of register CR
Implementations
impl R
[src]
pub fn wucksel(&self) -> WUCKSEL_R
[src]
Bits 0:2 - Wakeup clock selection
pub fn tsedge(&self) -> TSEDGE_R
[src]
Bit 3 - Time-stamp event active edge
pub fn refckon(&self) -> REFCKON_R
[src]
Bit 4 - Reference clock detection enable (50 or 60 Hz)
pub fn bypshad(&self) -> BYPSHAD_R
[src]
Bit 5 - Bypass the shadow registers
pub fn fmt(&self) -> FMT_R
[src]
Bit 6 - Hour format
pub fn alrae(&self) -> ALRAE_R
[src]
Bit 8 - Alarm A enable
pub fn alrbe(&self) -> ALRBE_R
[src]
Bit 9 - Alarm B enable
pub fn wute(&self) -> WUTE_R
[src]
Bit 10 - Wakeup timer enable
pub fn tse(&self) -> TSE_R
[src]
Bit 11 - Time stamp enable
pub fn alraie(&self) -> ALRAIE_R
[src]
Bit 12 - Alarm A interrupt enable
pub fn alrbie(&self) -> ALRBIE_R
[src]
Bit 13 - Alarm B interrupt enable
pub fn wutie(&self) -> WUTIE_R
[src]
Bit 14 - Wakeup timer interrupt enable
pub fn tsie(&self) -> TSIE_R
[src]
Bit 15 - Time-stamp interrupt enable
pub fn add1h(&self) -> ADD1H_R
[src]
Bit 16 - Add 1 hour (summer time change)
pub fn sub1h(&self) -> SUB1H_R
[src]
Bit 17 - Subtract 1 hour (winter time change)
pub fn bkp(&self) -> BKP_R
[src]
Bit 18 - Backup
pub fn cosel(&self) -> COSEL_R
[src]
Bit 19 - Calibration output selection
pub fn pol(&self) -> POL_R
[src]
Bit 20 - Output polarity
pub fn osel(&self) -> OSEL_R
[src]
Bits 21:22 - Output selection
pub fn coe(&self) -> COE_R
[src]
Bit 23 - Calibration output enable
pub fn itse(&self) -> ITSE_R
[src]
Bit 24 - timestamp on internal event enable
pub fn tampts(&self) -> TAMPTS_R
[src]
Bit 25 - TAMPTS
pub fn tampoe(&self) -> TAMPOE_R
[src]
Bit 26 - TAMPOE
pub fn tampalrm_pu(&self) -> TAMPALRM_PU_R
[src]
Bit 29 - TAMPALRM_PU
pub fn tampalrm_type(&self) -> TAMPALRM_TYPE_R
[src]
Bit 30 - TAMPALRM_TYPE
pub fn out2en(&self) -> OUT2EN_R
[src]
Bit 31 - OUT2EN