[−][src]Struct stm32g0xx_hal::gpio::gpiob::PB7

pub struct PB7<MODE> { /* fields omitted */ }

Methods

impl<MODE> PB7<MODE>[src]

pub fn into_floating_input(self) -> PB7<Input<Floating>>[src]

Configures the pin to operate as a floating input pin

pub fn into_pull_down_input(self) -> PB7<Input<PullDown>>[src]

Configures the pin to operate as a pulled down input pin

pub fn into_pull_up_input(self) -> PB7<Input<PullUp>>[src]

Configures the pin to operate as a pulled up input pin

pub fn into_analog(self) -> PB7<Analog>[src]

Configures the pin to operate as an analog pin

pub fn into_open_drain_output(self) -> PB7<Output<OpenDrain>>[src]

Configures the pin to operate as an open drain output pin

pub fn into_push_pull_output(self) -> PB7<Output<PushPull>>[src]

Configures the pin to operate as an push pull output pin

pub fn listen(self, edge: SignalEdge, exti: &mut EXTI) -> PB7<Input<PushPull>>[src]

Configures the pin as external trigger

pub fn set_speed(self, speed: Speed) -> Self[src]

Set pin speed

impl<MODE> PB7<Output<MODE>>[src]

pub fn downgrade(self) -> PB<Output<MODE>>[src]

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

impl<MODE> PB7<Input<MODE>>[src]

pub fn downgrade(self) -> PB<Input<MODE>>[src]

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

Trait Implementations

impl SDAPin<I2C1> for PB7<Output<OpenDrain>>[src]

impl RxPin<USART1> for PB7<DefaultMode>[src]

impl PinMosi<SPI2> for PB7<DefaultMode>[src]

impl Into<PB7<Input<PullDown>>> for PB7<DefaultMode>[src]

impl Into<PB7<Input<PullUp>>> for PB7<DefaultMode>[src]

impl Into<PB7<Analog>> for PB7<DefaultMode>[src]

impl Into<PB7<Output<OpenDrain>>> for PB7<DefaultMode>[src]

impl Into<PB7<Output<PushPull>>> for PB7<DefaultMode>[src]

impl<MODE> OutputPin for PB7<Output<MODE>>[src]

impl<MODE> StatefulOutputPin for PB7<Output<MODE>>[src]

impl<MODE> Default for PB7<Output<MODE>>[src]

impl<MODE> InputPin for PB7<Output<MODE>>[src]

impl<MODE> InputPin for PB7<Input<MODE>>[src]

Auto Trait Implementations

impl<MODE> Send for PB7<MODE> where
    MODE: Send, 

impl<MODE> Sync for PB7<MODE> where
    MODE: Sync, 

Blanket Implementations

impl<T> From for T[src]

impl<T, U> TryFrom for T where
    U: Into<T>, [src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto for T where
    U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<T, U> Into for T where
    U: From<T>, [src]

impl<T> Borrow for T where
    T: ?Sized, [src]

impl<T> BorrowMut for T where
    T: ?Sized, [src]

impl<T> Any for T where
    T: 'static + ?Sized, [src]

impl<P> ToggleableOutputPin for P where
    P: Default, [src]

fn toggle(&mut self)[src]

Toggle pin output