[][src]Struct stm32g0xx_hal::gpio::gpiob::PB6

pub struct PB6<MODE> { /* fields omitted */ }

Methods

impl<MODE> PB6<MODE>[src]

pub fn into_floating_input(self) -> PB6<Input<Floating>>[src]

Configures the pin to operate as a floating input pin

pub fn into_pull_down_input(self) -> PB6<Input<PullDown>>[src]

Configures the pin to operate as a pulled down input pin

pub fn into_pull_up_input(self) -> PB6<Input<PullUp>>[src]

Configures the pin to operate as a pulled up input pin

pub fn into_analog(self) -> PB6<Analog>[src]

Configures the pin to operate as an analog pin

pub fn into_open_drain_output(self) -> PB6<Output<OpenDrain>>[src]

Configures the pin to operate as an open drain output pin

pub fn into_push_pull_output(self) -> PB6<Output<PushPull>>[src]

Configures the pin to operate as an push pull output pin

pub fn listen(self, edge: SignalEdge, exti: &mut EXTI) -> PB6<Input<PushPull>>[src]

Configures the pin as external trigger

pub fn set_speed(self, speed: Speed) -> Self[src]

Set pin speed

impl<MODE> PB6<Output<MODE>>[src]

pub fn downgrade(self) -> PB<Output<MODE>>[src]

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

impl<MODE> PB6<Input<MODE>>[src]

pub fn downgrade(self) -> PB<Input<MODE>>[src]

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

Trait Implementations

impl SCLPin<I2C1> for PB6<Output<OpenDrain>>[src]

impl Pins<TIM1> for PB6<DefaultMode>[src]

type Channel = Pwm<TIM1, C3>

impl TxPin<USART1> for PB6<DefaultMode>[src]

impl PinMiso<SPI2> for PB6<DefaultMode>[src]

impl Into<PB6<Input<PullDown>>> for PB6<DefaultMode>[src]

impl Into<PB6<Input<PullUp>>> for PB6<DefaultMode>[src]

impl Into<PB6<Analog>> for PB6<DefaultMode>[src]

impl Into<PB6<Output<OpenDrain>>> for PB6<DefaultMode>[src]

impl Into<PB6<Output<PushPull>>> for PB6<DefaultMode>[src]

impl<MODE> OutputPin for PB6<Output<MODE>>[src]

impl<MODE> StatefulOutputPin for PB6<Output<MODE>>[src]

impl<MODE> Default for PB6<Output<MODE>>[src]

impl<MODE> InputPin for PB6<Output<MODE>>[src]

impl<MODE> InputPin for PB6<Input<MODE>>[src]

Auto Trait Implementations

impl<MODE> Send for PB6<MODE> where
    MODE: Send

impl<MODE> Sync for PB6<MODE> where
    MODE: Sync

Blanket Implementations

impl<T> From for T[src]

impl<T, U> TryFrom for T where
    U: Into<T>, 
[src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<T, U> Into for T where
    U: From<T>, 
[src]

impl<T> Borrow for T where
    T: ?Sized
[src]

impl<T> BorrowMut for T where
    T: ?Sized
[src]

impl<T> Any for T where
    T: 'static + ?Sized
[src]

impl<P> ToggleableOutputPin for P where
    P: Default
[src]

fn toggle(&mut self)[src]

Toggle pin output