pub type OC1M_W<'a, const O: u8> = FieldWriterSafe<'a, u32, CCMR1_OUTPUT_SPEC, u8, OC1M_A, 3, O>;
Expand description
Field OC1M
writer - Output compare 1 mode These bits define the behavior of the output reference signal OC1REF from which OC1 and OC1N are derived. OC1REF is active high whereas OC1 and OC1N active level depends on CC1P and CC1NP bits. Note: In PWM mode, the OCREF level changes only when the result of the comparison changes or when the output compare mode switches from âfrozenâ mode to âPWMâ mode. Note: The OC1M[3]
bit is not contiguous, located in bit 16.
Implementations
sourceimpl<'a, const O: u8> OC1M_W<'a, O>
impl<'a, const O: u8> OC1M_W<'a, O>
sourcepub fn frozen(self) -> &'a mut W
pub fn frozen(self) -> &'a mut W
The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
sourcepub fn active_on_match(self) -> &'a mut W
pub fn active_on_match(self) -> &'a mut W
Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
sourcepub fn inactive_on_match(self) -> &'a mut W
pub fn inactive_on_match(self) -> &'a mut W
Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
sourcepub fn force_inactive(self) -> &'a mut W
pub fn force_inactive(self) -> &'a mut W
OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
sourcepub fn force_active(self) -> &'a mut W
pub fn force_active(self) -> &'a mut W
OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
sourcepub fn pwm_mode1(self) -> &'a mut W
pub fn pwm_mode1(self) -> &'a mut W
In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down