Struct stm32g0::stm32g0c1::tim2::cr1::CMS_W

pub struct CMS_W<'a> { /* fields omitted */ }

Field CMS writer - Center-aligned mode selection Note: It is not allowed to switch from edge-aligned mode to center-aligned mode as long as the counter is enabled (CEN=1)

Implementations

impl<'a> CMS_W<'a>

pub fn variant(self, variant: CMS_A) -> &'a mut W

Writes variant to the field

pub fn b_0x0(self) -> &'a mut W

Edge-aligned mode. The counter counts up or down depending on the direction bit (DIR).

pub fn b_0x1(self) -> &'a mut W

Center-aligned mode 1. The counter counts up and down alternatively. Output compare interrupt flags of channels configured in output (CCxS=00 in TIMx_CCMRx register) are set only when the counter is counting down.

pub fn b_0x2(self) -> &'a mut W

Center-aligned mode 2. The counter counts up and down alternatively. Output compare interrupt flags of channels configured in output (CCxS=00 in TIMx_CCMRx register) are set only when the counter is counting up.

pub fn b_0x3(self) -> &'a mut W

Center-aligned mode 3. The counter counts up and down alternatively. Output compare interrupt flags of channels configured in output (CCxS=00 in TIMx_CCMRx register) are set both when the counter is counting up or down.

pub fn bits(self, value: u8) -> &'a mut W

Writes raw bits to the field