Struct stm32f7x6::sdmmc1::sta::R
[−]
[src]
pub struct R { /* fields omitted */ }
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn ceataend(&self) -> CEATAENDR
[src]
Bit 23 - CE-ATA command completion signal received for CMD61
pub fn sdioit(&self) -> SDIOITR
[src]
Bit 22 - SDIO interrupt received
pub fn rxdavl(&self) -> RXDAVLR
[src]
Bit 21 - Data available in receive FIFO
pub fn txdavl(&self) -> TXDAVLR
[src]
Bit 20 - Data available in transmit FIFO
pub fn rxfifoe(&self) -> RXFIFOER
[src]
Bit 19 - Receive FIFO empty
pub fn txfifoe(&self) -> TXFIFOER
[src]
Bit 18 - Transmit FIFO empty
pub fn rxfifof(&self) -> RXFIFOFR
[src]
Bit 17 - Receive FIFO full
pub fn txfifof(&self) -> TXFIFOFR
[src]
Bit 16 - Transmit FIFO full
pub fn rxfifohf(&self) -> RXFIFOHFR
[src]
Bit 15 - Receive FIFO half full: there are at least 8 words in the FIFO
pub fn txfifohe(&self) -> TXFIFOHER
[src]
Bit 14 - Transmit FIFO half empty: at least 8 words can be written into the FIFO
pub fn rxact(&self) -> RXACTR
[src]
Bit 13 - Data receive in progress
pub fn txact(&self) -> TXACTR
[src]
Bit 12 - Data transmit in progress
pub fn cmdact(&self) -> CMDACTR
[src]
Bit 11 - Command transfer in progress
pub fn dbckend(&self) -> DBCKENDR
[src]
Bit 10 - Data block sent/received (CRC check passed)
pub fn stbiterr(&self) -> STBITERRR
[src]
Bit 9 - Start bit not detected on all data signals in wide bus mode
pub fn dataend(&self) -> DATAENDR
[src]
Bit 8 - Data end (data counter, SDIDCOUNT, is zero)
pub fn cmdsent(&self) -> CMDSENTR
[src]
Bit 7 - Command sent (no response required)
pub fn cmdrend(&self) -> CMDRENDR
[src]
Bit 6 - Command response received (CRC check passed)
pub fn rxoverr(&self) -> RXOVERRR
[src]
Bit 5 - Received FIFO overrun error
pub fn txunderr(&self) -> TXUNDERRR
[src]
Bit 4 - Transmit FIFO underrun error
pub fn dtimeout(&self) -> DTIMEOUTR
[src]
Bit 3 - Data timeout
pub fn ctimeout(&self) -> CTIMEOUTR
[src]
Bit 2 - Command response timeout
pub fn dcrcfail(&self) -> DCRCFAILR
[src]
Bit 1 - Data block sent/received (CRC check failed)
pub fn ccrcfail(&self) -> CCRCFAILR
[src]
Bit 0 - Command response received (CRC check failed)