Struct stm32f4xx_hal::stm32::sdio::sta::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn ceataend(&self) -> CEATAENDR

Bit 23 - CE-ATA command completion signal received for CMD61

pub fn sdioit(&self) -> SDIOITR

Bit 22 - SDIO interrupt received

pub fn rxdavl(&self) -> RXDAVLR

Bit 21 - Data available in receive FIFO

pub fn txdavl(&self) -> TXDAVLR

Bit 20 - Data available in transmit FIFO

pub fn rxfifoe(&self) -> RXFIFOER

Bit 19 - Receive FIFO empty

pub fn txfifoe(&self) -> TXFIFOER

Bit 18 - Transmit FIFO empty

pub fn rxfifof(&self) -> RXFIFOFR

Bit 17 - Receive FIFO full

pub fn txfifof(&self) -> TXFIFOFR

Bit 16 - Transmit FIFO full

pub fn rxfifohf(&self) -> RXFIFOHFR

Bit 15 - Receive FIFO half full: there are at least 8 words in the FIFO

pub fn txfifohe(&self) -> TXFIFOHER

Bit 14 - Transmit FIFO half empty: at least 8 words can be written into the FIFO

pub fn rxact(&self) -> RXACTR

Bit 13 - Data receive in progress

pub fn txact(&self) -> TXACTR

Bit 12 - Data transmit in progress

pub fn cmdact(&self) -> CMDACTR

Bit 11 - Command transfer in progress

pub fn dbckend(&self) -> DBCKENDR

Bit 10 - Data block sent/received (CRC check passed)

pub fn stbiterr(&self) -> STBITERRR

Bit 9 - Start bit not detected on all data signals in wide bus mode

pub fn dataend(&self) -> DATAENDR

Bit 8 - Data end (data counter, SDIDCOUNT, is zero)

pub fn cmdsent(&self) -> CMDSENTR

Bit 7 - Command sent (no response required)

pub fn cmdrend(&self) -> CMDRENDR

Bit 6 - Command response received (CRC check passed)

pub fn rxoverr(&self) -> RXOVERRR

Bit 5 - Received FIFO overrun error

pub fn txunderr(&self) -> TXUNDERRR

Bit 4 - Transmit FIFO underrun error

pub fn dtimeout(&self) -> DTIMEOUTR

Bit 3 - Data timeout

pub fn ctimeout(&self) -> CTIMEOUTR

Bit 2 - Command response timeout

pub fn dcrcfail(&self) -> DCRCFAILR

Bit 1 - Data block sent/received (CRC check failed)

pub fn ccrcfail(&self) -> CCRCFAILR

Bit 0 - Command response received (CRC check failed)