[−]Struct stm32f407g_disc::stm32::dma2::s4cr::W
Value to write to the register
Methods
impl W
pub fn reset_value() -> W
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut W
Writes raw bits to the register
pub fn chsel(&mut self) -> _CHSELW
Bits 25:27 - Channel selection
pub fn mburst(&mut self) -> _MBURSTW
Bits 23:24 - Memory burst transfer configuration
pub fn pburst(&mut self) -> _PBURSTW
Bits 21:22 - Peripheral burst transfer configuration
pub fn ack(&mut self) -> _ACKW
Bit 20 - ACK
pub fn ct(&mut self) -> _CTW
Bit 19 - Current target (only in double buffer mode)
pub fn dbm(&mut self) -> _DBMW
Bit 18 - Double buffer mode
pub fn pl(&mut self) -> _PLW
Bits 16:17 - Priority level
pub fn pincos(&mut self) -> _PINCOSW
Bit 15 - Peripheral increment offset size
pub fn msize(&mut self) -> _MSIZEW
Bits 13:14 - Memory data size
pub fn psize(&mut self) -> _PSIZEW
Bits 11:12 - Peripheral data size
pub fn minc(&mut self) -> _MINCW
Bit 10 - Memory increment mode
pub fn pinc(&mut self) -> _PINCW
Bit 9 - Peripheral increment mode
pub fn circ(&mut self) -> _CIRCW
Bit 8 - Circular mode
pub fn dir(&mut self) -> _DIRW
Bits 6:7 - Data transfer direction
pub fn pfctrl(&mut self) -> _PFCTRLW
Bit 5 - Peripheral flow controller
pub fn tcie(&mut self) -> _TCIEW
Bit 4 - Transfer complete interrupt enable
pub fn htie(&mut self) -> _HTIEW
Bit 3 - Half transfer interrupt enable
pub fn teie(&mut self) -> _TEIEW
Bit 2 - Transfer error interrupt enable
pub fn dmeie(&mut self) -> _DMEIEW
Bit 1 - Direct mode error interrupt enable
pub fn en(&mut self) -> _ENW
Bit 0 - Stream enable / flag stream ready when read low
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,