[−][src]Struct stm32f3xx_hal::gpio::gpioc::PC11
Pin PC11
Implementations
impl<MODE> PC11<MODE>
[src]
pub fn into_af1(self, moder: &mut MODER, afr: &mut AFRH) -> PC11<AF1>
[src]
Configures PC11 to serve as alternate function: AF1
pub fn into_af4(self, moder: &mut MODER, afr: &mut AFRH) -> PC11<AF4>
[src]
Configures PC11 to serve as alternate function: AF4
pub fn into_af5(self, moder: &mut MODER, afr: &mut AFRH) -> PC11<AF5>
[src]
Configures PC11 to serve as alternate function: AF5
pub fn into_af6(self, moder: &mut MODER, afr: &mut AFRH) -> PC11<AF6>
[src]
Configures PC11 to serve as alternate function: AF6
pub fn into_af7(self, moder: &mut MODER, afr: &mut AFRH) -> PC11<AF7>
[src]
Configures PC11 to serve as alternate function: AF7
pub fn into_floating_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PC11<Input<Floating>>
[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PC11<Input<Floating>>
Configures the pin to operate as a floating input pin
pub fn into_pull_down_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PC11<Input<PullDown>>
[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PC11<Input<PullDown>>
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PC11<Input<PullUp>>
[src]
self,
moder: &mut MODER,
pupdr: &mut PUPDR
) -> PC11<Input<PullUp>>
Configures the pin to operate as a pulled up input pin
pub fn into_open_drain_output(
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PC11<Output<OpenDrain>>
[src]
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PC11<Output<OpenDrain>>
Configures the pin to operate as an open drain output pin
pub fn into_push_pull_output(
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PC11<Output<PushPull>>
[src]
self,
moder: &mut MODER,
otyper: &mut OTYPER
) -> PC11<Output<PushPull>>
Configures the pin to operate as an push pull output pin
pub fn into_analog(self, moder: &mut MODER, pupdr: &mut PUPDR) -> PC11<Analog>
[src]
Configures the pin to operate as analog, with disabled schmitt trigger. This mode is suitable when the pin is connected to the DAC or ADC.
impl PC11<Output<OpenDrain>>
[src]
pub fn internal_pull_up(&mut self, pupdr: &mut PUPDR, on: bool)
[src]
Enables / disables the internal pull up
impl<MODE> PC11<Output<MODE>>
[src]
pub fn downgrade(self) -> PCx<Output<MODE>>
[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
impl<MODE> PC11<Input<MODE>>
[src]
pub fn downgrade(self) -> PCx<Input<MODE>>
[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl<MODE> Default for PC11<Output<MODE>>
[src]
impl<MODE> InputPin for PC11<Input<MODE>>
[src]
type Error = Infallible
Error type
pub fn is_high(&self) -> Result<bool, Self::Error>
[src]
pub fn is_low(&self) -> Result<bool, Self::Error>
[src]
impl InputPin for PC11<Output<OpenDrain>>
[src]
type Error = Infallible
Error type
pub fn is_high(&self) -> Result<bool, Self::Error>
[src]
pub fn is_low(&self) -> Result<bool, Self::Error>
[src]
impl MisoPin<SPI3> for PC11<AF6>
[src]
impl<MODE> OutputPin for PC11<Output<MODE>>
[src]
type Error = Infallible
Error type
pub fn set_high(&mut self) -> Result<(), Self::Error>
[src]
pub fn set_low(&mut self) -> Result<(), Self::Error>
[src]
impl RxPin<USART3> for PC11<AF7>
[src]
impl<MODE> StatefulOutputPin for PC11<Output<MODE>>
[src]
pub fn is_set_high(&self) -> Result<bool, Self::Error>
[src]
pub fn is_set_low(&self) -> Result<bool, Self::Error>
[src]
Auto Trait Implementations
impl<MODE> Send for PC11<MODE> where
MODE: Send,
MODE: Send,
impl<MODE> Sync for PC11<MODE> where
MODE: Sync,
MODE: Sync,
impl<MODE> Unpin for PC11<MODE> where
MODE: Unpin,
MODE: Unpin,
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<P> ToggleableOutputPin for P where
P: Default,
[src]
P: Default,
type Error = <P as OutputPin>::Error
Error type
pub fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>
[src]
Toggle pin output
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,