Struct PB12 

pub struct PB12<MODE> { /* private fields */ }

Pin PB12

Implementations

impl<MODE> PB12<MODE>

pub fn into_af3(self, moder: &mut MODER, afr: &mut AFRH) -> PB12<AF3>

Configures PB12 to serve as alternate function: AF3

pub fn into_af4(self, moder: &mut MODER, afr: &mut AFRH) -> PB12<AF4>

Configures PB12 to serve as alternate function: AF4

pub fn into_af5(self, moder: &mut MODER, afr: &mut AFRH) -> PB12<AF5>

Configures PB12 to serve as alternate function: AF5

pub fn into_af6(self, moder: &mut MODER, afr: &mut AFRH) -> PB12<AF6>

Configures PB12 to serve as alternate function: AF6

pub fn into_af7(self, moder: &mut MODER, afr: &mut AFRH) -> PB12<AF7>

Configures PB12 to serve as alternate function: AF7

pub fn into_af15(self, moder: &mut MODER, afr: &mut AFRH) -> PB12<AF15>

Configures PB12 to serve as alternate function: AF15

pub fn into_floating_input( self, moder: &mut MODER, pupdr: &mut PUPDR, ) -> PB12<Input<Floating>>

Configures the pin to operate as a floating input pin

pub fn into_pull_down_input( self, moder: &mut MODER, pupdr: &mut PUPDR, ) -> PB12<Input<PullDown>>

Configures the pin to operate as a pulled down input pin

pub fn into_pull_up_input( self, moder: &mut MODER, pupdr: &mut PUPDR, ) -> PB12<Input<PullUp>>

Configures the pin to operate as a pulled up input pin

pub fn into_open_drain_output( self, moder: &mut MODER, otyper: &mut OTYPER, ) -> PB12<Output<OpenDrain>>

Configures the pin to operate as an open drain output pin

pub fn into_push_pull_output( self, moder: &mut MODER, otyper: &mut OTYPER, ) -> PB12<Output<PushPull>>

Configures the pin to operate as an push pull output pin

pub fn into_analog(self, moder: &mut MODER, pupdr: &mut PUPDR) -> PB12<Analog>

Configures the pin to operate as analog, with disabled schmitt trigger. This mode is suitable when the pin is connected to the DAC or ADC.

impl PB12<Output<OpenDrain>>

pub fn internal_pull_up(&mut self, pupdr: &mut PUPDR, on: bool)

Enables / disables the internal pull up

impl<MODE> PB12<Output<MODE>>

pub fn downgrade(self) -> PBx<Output<MODE>>

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

impl<MODE> PB12<Input<MODE>>

pub fn downgrade(self) -> PBx<Input<MODE>>

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

Trait Implementations

impl Channel<ADC4> for PB12<Analog>

type ID = u8

Channel ID type

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8.

impl<MODE> InputPin for PB12<Input<MODE>>

type Error = Infallible

Error type

fn is_high(&self) -> Result<bool, Self::Error>

Is the input pin high?

fn is_low(&self) -> Result<bool, Self::Error>

Is the input pin low?

impl InputPin for PB12<Output<OpenDrain>>

type Error = Infallible

Error type

fn is_high(&self) -> Result<bool, Self::Error>

Is the input pin high?

fn is_low(&self) -> Result<bool, Self::Error>

Is the input pin low?

impl<MODE> OutputPin for PB12<Output<MODE>>

type Error = Infallible

Error type

fn set_high(&mut self) -> Result<(), Self::Error>

Drives the pin high

fn set_low(&mut self) -> Result<(), Self::Error>

Drives the pin low

impl<MODE> StatefulOutputPin for PB12<Output<MODE>>

fn is_set_high(&self) -> Result<bool, Self::Error>

Is the pin in drive high mode?

fn is_set_low(&self) -> Result<bool, Self::Error>

Is the pin in drive low mode?

impl<MODE> Default for PB12<Output<MODE>>