[−][src]Struct stm32f3::stm32f373::usart1::cr1::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W | [src] |
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self | [src] |
Writes raw bits to the register
pub fn eobie(&mut self) -> _EOBIEW | [src] |
Bit 27 - End of Block interrupt enable
pub fn rtoie(&mut self) -> _RTOIEW | [src] |
Bit 26 - Receiver timeout interrupt enable
pub fn deat(&mut self) -> _DEATW | [src] |
Bits 21:25 - Driver Enable assertion time
pub fn dedt(&mut self) -> _DEDTW | [src] |
Bits 16:20 - Driver Enable deassertion time
pub fn over8(&mut self) -> _OVER8W | [src] |
Bit 15 - Oversampling mode
pub fn cmie(&mut self) -> _CMIEW | [src] |
Bit 14 - Character match interrupt enable
pub fn mme(&mut self) -> _MMEW | [src] |
Bit 13 - Mute mode enable
pub fn m(&mut self) -> _MW | [src] |
Bit 12 - Word length
pub fn wake(&mut self) -> _WAKEW | [src] |
Bit 11 - Receiver wakeup method
pub fn pce(&mut self) -> _PCEW | [src] |
Bit 10 - Parity control enable
pub fn ps(&mut self) -> _PSW | [src] |
Bit 9 - Parity selection
pub fn peie(&mut self) -> _PEIEW | [src] |
Bit 8 - PE interrupt enable
pub fn txeie(&mut self) -> _TXEIEW | [src] |
Bit 7 - interrupt enable
pub fn tcie(&mut self) -> _TCIEW | [src] |
Bit 6 - Transmission complete interrupt enable
pub fn rxneie(&mut self) -> _RXNEIEW | [src] |
Bit 5 - RXNE interrupt enable
pub fn idleie(&mut self) -> _IDLEIEW | [src] |
Bit 4 - IDLE interrupt enable
pub fn te(&mut self) -> _TEW | [src] |
Bit 3 - Transmitter enable
pub fn re(&mut self) -> _REW | [src] |
Bit 2 - Receiver enable
pub fn uesm(&mut self) -> _UESMW | [src] |
Bit 1 - USART enable in Stop mode
pub fn ue(&mut self) -> _UEW | [src] |
Bit 0 - USART enable
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error> | [src] |
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error> | [src] |
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T | [src] |
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId | [src] |