[−][src]Struct stm32f3::stm32f373::rtc::cr::R
Value read from the register
Methods
impl R
[src]
impl R
pub fn bits(&self) -> u32 | [src] |
Value of the register as raw bits
pub fn wcksel(&self) -> WCKSELR | [src] |
Bits 0:2 - Wakeup clock selection
pub fn tsedge(&self) -> TSEDGER | [src] |
Bit 3 - Time-stamp event active edge
pub fn refckon(&self) -> REFCKONR | [src] |
Bit 4 - Reference clock detection enable (50 or 60 Hz)
pub fn bypshad(&self) -> BYPSHADR | [src] |
Bit 5 - Bypass the shadow registers
pub fn fmt(&self) -> FMTR | [src] |
Bit 6 - Hour format
pub fn alrae(&self) -> ALRAER | [src] |
Bit 8 - Alarm A enable
pub fn alrbe(&self) -> ALRBER | [src] |
Bit 9 - Alarm B enable
pub fn wute(&self) -> WUTER | [src] |
Bit 10 - Wakeup timer enable
pub fn tse(&self) -> TSER | [src] |
Bit 11 - Time stamp enable
pub fn alraie(&self) -> ALRAIER | [src] |
Bit 12 - Alarm A interrupt enable
pub fn alrbie(&self) -> ALRBIER | [src] |
Bit 13 - Alarm B interrupt enable
pub fn wutie(&self) -> WUTIER | [src] |
Bit 14 - Wakeup timer interrupt enable
pub fn tsie(&self) -> TSIER | [src] |
Bit 15 - Time-stamp interrupt enable
pub fn add1h(&self) -> ADD1HR | [src] |
Bit 16 - Add 1 hour (summer time change)
pub fn sub1h(&self) -> SUB1HR | [src] |
Bit 17 - Subtract 1 hour (winter time change)
pub fn bkp(&self) -> BKPR | [src] |
Bit 18 - Backup
pub fn cosel(&self) -> COSELR | [src] |
Bit 19 - Calibration output selection
pub fn pol(&self) -> POLR | [src] |
Bit 20 - Output polarity
pub fn osel(&self) -> OSELR | [src] |
Bits 21:22 - Output selection
pub fn coe(&self) -> COER | [src] |
Bit 23 - Calibration output enable
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error> | [src] |
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error> | [src] |
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T | [src] |
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId | [src] |