[−][src]Struct stm32f3::stm32f303::rtc::tafcr::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W | [src] |
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self | [src] |
Writes raw bits to the register
pub fn tamp1e(&mut self) -> _TAMP1EW | [src] |
Bit 0 - Tamper 1 detection enable
pub fn tamp1trg(&mut self) -> _TAMP1TRGW | [src] |
Bit 1 - Active level for tamper 1
pub fn tampie(&mut self) -> _TAMPIEW | [src] |
Bit 2 - Tamper interrupt enable
pub fn tamp2e(&mut self) -> _TAMP2EW | [src] |
Bit 3 - Tamper 2 detection enable
pub fn tamp2trg(&mut self) -> _TAMP2TRGW | [src] |
Bit 4 - Active level for tamper 2
pub fn tamp3e(&mut self) -> _TAMP3EW | [src] |
Bit 5 - Tamper 3 detection enable
pub fn tamp3trg(&mut self) -> _TAMP3TRGW | [src] |
Bit 6 - Active level for tamper 3
pub fn tampts(&mut self) -> _TAMPTSW | [src] |
Bit 7 - Activate timestamp on tamper detection event
pub fn tampfreq(&mut self) -> _TAMPFREQW | [src] |
Bits 8:10 - Tamper sampling frequency
pub fn tampflt(&mut self) -> _TAMPFLTW | [src] |
Bits 11:12 - Tamper filter count
pub fn tampprch(&mut self) -> _TAMPPRCHW | [src] |
Bits 13:14 - Tamper precharge duration
pub fn tamppudis(&mut self) -> _TAMPPUDISW | [src] |
Bit 15 - TAMPER pull-up disable
pub fn pc13value(&mut self) -> _PC13VALUEW | [src] |
Bit 18 - PC13 value
pub fn pc13mode(&mut self) -> _PC13MODEW | [src] |
Bit 19 - PC13 mode
pub fn pc14value(&mut self) -> _PC14VALUEW | [src] |
Bit 20 - PC14 value
pub fn pc14mode(&mut self) -> _PC14MODEW | [src] |
Bit 21 - PC 14 mode
pub fn pc15value(&mut self) -> _PC15VALUEW | [src] |
Bit 22 - PC15 value
pub fn pc15mode(&mut self) -> _PC15MODEW | [src] |
Bit 23 - PC15 mode
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
🔬 This is a nightly-only experimental API. (
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error> | [src] |
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
🔬 This is a nightly-only experimental API. (
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error> | [src] |
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T | [src] |
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId | [src] |