Struct stm32f0x0::usart1::isr::R [−][src]
pub struct R { /* fields omitted */ }
Value read from the register
Methods
impl R
[src]
impl R
pub fn bits(&self) -> u32
[src]
pub fn bits(&self) -> u32
Value of the register as raw bits
pub fn reack(&self) -> REACKR
[src]
pub fn reack(&self) -> REACKR
Bit 22 - Receive enable acknowledge flag
pub fn teack(&self) -> TEACKR
[src]
pub fn teack(&self) -> TEACKR
Bit 21 - Transmit enable acknowledge flag
pub fn wuf(&self) -> WUFR
[src]
pub fn wuf(&self) -> WUFR
Bit 20 - Wakeup from Stop mode flag
pub fn rwu(&self) -> RWUR
[src]
pub fn rwu(&self) -> RWUR
Bit 19 - Receiver wakeup from Mute mode
pub fn sbkf(&self) -> SBKFR
[src]
pub fn sbkf(&self) -> SBKFR
Bit 18 - Send break flag
pub fn cmf(&self) -> CMFR
[src]
pub fn cmf(&self) -> CMFR
Bit 17 - character match flag
pub fn busy(&self) -> BUSYR
[src]
pub fn busy(&self) -> BUSYR
Bit 16 - Busy flag
pub fn abrf(&self) -> ABRFR
[src]
pub fn abrf(&self) -> ABRFR
Bit 15 - Auto baud rate flag
pub fn abre(&self) -> ABRER
[src]
pub fn abre(&self) -> ABRER
Bit 14 - Auto baud rate error
pub fn eobf(&self) -> EOBFR
[src]
pub fn eobf(&self) -> EOBFR
Bit 12 - End of block flag
pub fn rtof(&self) -> RTOFR
[src]
pub fn rtof(&self) -> RTOFR
Bit 11 - Receiver timeout
pub fn cts(&self) -> CTSR
[src]
pub fn cts(&self) -> CTSR
Bit 10 - CTS flag
pub fn ctsif(&self) -> CTSIFR
[src]
pub fn ctsif(&self) -> CTSIFR
Bit 9 - CTS interrupt flag
pub fn lbdf(&self) -> LBDFR
[src]
pub fn lbdf(&self) -> LBDFR
Bit 8 - LIN break detection flag
pub fn txe(&self) -> TXER
[src]
pub fn txe(&self) -> TXER
Bit 7 - Transmit data register empty
pub fn tc(&self) -> TCR
[src]
pub fn tc(&self) -> TCR
Bit 6 - Transmission complete
pub fn rxne(&self) -> RXNER
[src]
pub fn rxne(&self) -> RXNER
Bit 5 - Read data register not empty
pub fn idle(&self) -> IDLER
[src]
pub fn idle(&self) -> IDLER
Bit 4 - Idle line detected
pub fn ore(&self) -> ORER
[src]
pub fn ore(&self) -> ORER
Bit 3 - Overrun error
pub fn nf(&self) -> NFR
[src]
pub fn nf(&self) -> NFR
Bit 2 - Noise detected flag
pub fn fe(&self) -> FER
[src]
pub fn fe(&self) -> FER
Bit 1 - Framing error
pub fn pe(&self) -> PER
[src]
pub fn pe(&self) -> PER
Bit 0 - Parity error